Quick Fix Scanner Error On Epson ET-2720

Fix Scanner Error Code: 100016 On Epson Et-2720, Quick Fix and Resolve #fixscanner #epson #epsonet2720

[@jazzedat1]

Thank you so much.🎉 I had two of the strips out (after delving into my printer to recover a pound coin) had no idea what to do with them. You saved me over £200. Have a great day. 😃

[@Vanessa-rz1vc]

This video saved me from buying a new printer. Thank you!!

[@jessicascott7759]

Thank you so much! I did exactly what you showed me, and it worked. I had called customer support at Epson, and was told the motherboard may have gone out or that it was a problem that I would need to send it in to get fixed. I'm so glad I came across your short effective video.

[@charlessnely3626]

I'm so glad to help you ☺

[@charlessnely3626]

🤗 don't forget to SUBSCRIBE I would appreciate 🙏

[@DrPhylCunningham]

Thank you so much! I found an earring inside and the paper would not feed through. You saved me!

[@charlessnely3626]

🤗 You're welcome

[@sabrinahinojos396]

Well that was an easy fix. Here I was thinking I was gonna have to go buy a new printer. Thank you so much! It was easy and straight to the point.

[@itszee955]

Thank you so much !! All I kept getting from everywhere was "Don't touch it!" "Don't pull" "just reconnect it" Reconnect it where !?! I had it under the tape at some point 😂

[@karacat18]

Thank you so much!!!! I was freaking out bc it popped out when i was trying to figure out how to open my printer (i have the ET 4700 but they’re pretty similar) and i didn’t know what to do! Now i need to figure out why it’s not printing black, but at least i can print again!! Thank you so so much!!! 😃💕

[@missygurlmukbang5090]

Omg I’ve been trying to figure out why my 2720 wasn’t getting any connections thank you so much for sharing it solved my problem you definitely have my sub and 👍🏽 😊

[@nicolajacobs536]

Excellent. Had my printer working in seconds. Thank you

[@mohammedk.h.f3016]

Thank you so much, I faced the same problem in EPSON ET-4700.

[@ladawntushae357]

Thank you so much for this video this helped me fix the problem with my printer

[@pippolino69]

This video was a precious help for me. I thank you very much.

[@chinestaskelton2251]

You are awesome, but It would be nice if you would connect with the viewers and respond to the ones with questions but I thank you for the insight ….

[@emmacerklewicz9672]

you are a very clever man. thank you so much !!!

[@mariatiripiti3592]

Yay! finally. I had been trying to fix my printer. This Helped Sooooo Much. I also had the other one with the blue taping out. But from your video I figured it had to go attached to the other Hole next to it. :)

[@charlessnely3626]

so glad my video helped you

[@charlessnely3626]

🤗 don't forget to SUBSCRIBE I would appreciate 🙏

[@ritabamford185]

Hi Charles. I have this problem too. I can attach the one you show but cannot see where to insert the one with the blue tape on top. Can you help? Thanks!!

[@kimv6871]

Thank you so much! Both you and Charles saved my printer!

[@kimv6871]

@@ritabamford185 There is a tiny weeny place similar to the other one where you can insert the blue tape one into. Use something to prop up the printer cover and put a headline on if you can. When you get to the little weeny place, apply a little pressure on both sides (use your other figure on the opposite side) until it's secured.

[@AGonTv1]

I still have the same error although the printer is printing. Any advice?

[@michellewilder4723]

Mines didn't the first time. Make sure you really push the white cord in. You will hear a little snap. (Not too hard)

[@brendaphillips6379]

Thank you for your video. I was able to resolve the paper jam. However, the photo print are distorted. Can you help me with this?

[@angiejorah]

Fixed. Thank You.

[@tanyafindsdreamhomes]

Thank you I am going trying this method

[@z33317]

Ditto Sabrina below - this did the trick. Thanks for posting video.

[@shamariatyler510]

Unfortunately this doesn't work for me 😬

[@jeannienesheim2755]

The blue tipped ribbon next to this one also needs reinsertion. Can you help?

[@tommybalzer7496]

Great video!! Thank you so much. I do have a question... where does the larger strip go. I can't get it to connect to the obviously place. I so appreciate your help.

[@juddthebartender5784]

Me too. Both of the ribbon cables have popped off from behind the circuit board. Could use a very clear pic of the board connector and how they re attach.

[@carmijok1]

I'm not understanding which screws to remove. The two on the far ends or the ones closer in.

[@andrewhare1524]

The far ends.

[@stevejette2329]

Here's a couple ideas: Put the damn thing on a desk so you don't need to kneel and use the camera sideways. Also turn on the lights so you don't need to use the silly phone light.

[@teresacrawford5651]

This was hilarious but so true! I was crazy struggling trying to see the slots. I came back here and read through the responses and saw yours. Got a LED lamp and boom---I could see-lol! Fixed in a minute!!

[@stevejette2329]

@@teresacrawford5651 And that was not my problem. I had to un-install and re-install. Then it went out again ! So now I don't use it.

[@teresacrawford5651]

@@stevejette2329 That's a shame!

[@MichelePlunkett]

I keep hearing stories how Epson tries to over charge to fix their et 2720 printers. Let me say something . Every part to that printer is cheap to buy and easy to replace. They put these life cycles on thier printer in attempt to make you buy a new one when those parts are easy to replace.

[@kimberlystripling2055]

I have an Epson ET-2760 that has the exact same error....do you know how to fix it for ET-2760?

[@clarimariegonzalez8536]

Thanks for your video!

[@amandamurray7042]

Thank you so very much for your help!!!!!

[@DanielHodgson-gb9eh]

Thanks, this worked great!!

[@anniadkins]

I am sure that what you say will work. I just cannot see the whole where they go. Do you have drawings or something?

[@dannirenee1344]

Thank you so much for sharing this💕🫶🏽

[@caribmedical57]

Thanks man! 🤩

[@Therealltottiona]

Thank you soo much you made it so easy thank u ❤️❤️❤️❤️

[@soleeleeso3135]

Thank you so much blessing

[@StacyPowerhouse]

Very helpful thank you. ♥️

[@mbmessymama7079]

thanks so much, it worked!

[@dawnjohnson1396]

Hello I’ve done that and it’s still saying same code..

[@freetobememe4358]

Only problem is the second one came out too.

[@kdrj415]

Mine is still showing the error message

[@yanethflores6618]

Thank you it works:)

[@perfectlittleaccessories7694]

Thank you you it helped a lot!

[@charlessnely3626]

You're welcome 🤗 don't forget to SUBSCRIBE I would appreciate 🙏

[@desklight-c7w]

Thank you

[@perfectlittleaccessories7694]

Thank you it helped a lot

[@sergioflores3655]

I didit but it doesn’t works what else can I do

[@jimmyperez1704]

I did that but it keep coming up the error ?

[@jazzhdz3326]

It's still showing error and I followed all steps, like it turns on for a couple of seconds and error shows up again what can I do?

[@elaiynamartinez7124]

The same thing is happening to mine and it is only a month old

[@aneliyayordanova3523]

Same here 😒

[@perno34]

Same here

[@motivationworld027]

Same, just got it this week lol first time turning it on

[@kkkrysta13]

@@motivationworld027 Did you end up figuring it out?

[@lifestylewithdes]

thank you!

[@MegaGrownFolks]

You flipped the camera when you put it inside. Therefore….it is what it is

[@kimberly0009]

What if the other strand with blue is off?

[@kimv6871]

There is a tiny weeny place similar to the other one where you can insert the blue tape one into. Use something to prop up the printer cover and put a headline on if you can. When you get to the little weeny place, apply a little pressure on both sides (use your other figure on the opposite side) until it's secured.

[@veronicamontecillo8980]

Buenas tarde gracias, me funciono perfectamente.

[@micaswifey]

Ty

[@proverbs31cosmetics39]

mine still has the error 034004 😭

[@sheilamiller2683]

I did this and still getting code

[@asifnawaz2443]

Sir i have an isuue with epson 2760 error 000043 error

[@joselineramirez2278]

My it say E-11 ! What can I do ?

[@ou4real149]

What about the one that has blue on the tip? I don’t see a slot for it and it’s out.

[@JohnChandler-r6m]

Print from Page 1 in a document

[@bb-kv8cb]

Come si apre?

[@pjmtts]

That’s what she said

[@georgettemoore6414]

didnt work, error still there

[@angelseamckemie1187]

Same

[@freetobememe4358]

It’s not very easy.

[@c.l.holstein2866]

So true

[@roxylopez2639]

Mine still isn’t working