[Quick How-to] Install Flex Duct System, Easy DIY HVAC ductwork, realignment

This is about installing flex duct system for a part of my HVAC realignment project. It's great to have some flex duct so that you'll have some wiggle room around the ducts!
Link to product:
Flex duct 6 x 25 in: amzn.to/3smAlFF
(Above link is part of Amazon Associates program where I may earn a small commission at no cost to you if purchase is made through the link, thank you!)
#flexduct #flexductinstallation #HVACductwork #DIYHVAC #DIYHVACductwork #easyDIY #easyDIYHVAC #HVACrealignment #ductrealignment #HVACductrealignment #HVACduct #homeimprovement #flexductconnection #flexductsupplyvent #hammerandpan
Music: www.bensound.com

[@kimberlyrussell9698]

Thank you, your video is clear and super helpful.

[@hammerandrake]

Thank you for watching!!!

[@christonacouch5550]

An Asian dude in America actually doin his own home improvement with a few tools !?? You must be Filipino??😃 good work man I’m an hvac tech and you’re obviously a super handy guy 🤙

[@Jaredxstp]

Hey man thanks for sharing the video!! At the 2:30 mark in your video. Off to your left side you have a duct running down the wall cavity using a oval duct to fit there. Do you use anything to hold it in place or is it just free hanging between register and top elbow. Asking because I’m at that part in my basement finish!! Thanks!

[@hammerandrake]

I had (removable/replaceable) straps to fix the elbow before coming down to the register. In fact I had multiple points along the duct running across the top where it was fixed by straps. Once the elbow is fixed I didn’t much need much fixing for the duct coming down though. Thanks for watching!!

[@Jaredxstp]

@@hammerandrake thanks I didn’t even think to use straps! I saw the fabric style or metal ones they use for flexible duct to hold it up so it’s not all saggy in ceiling. Thanks for the tip I’ll def go pick some up today and continue with my hvac install. Also thanks again for videos your type of content helps everyone from paying thousands and save us some money. Actually yea I can see a metal strap wrapped around the elbow now that I pause and zoom in

[@justkurt7716]

Using red and green will give you a much nicer and smoother faster cut tho

[@Casmige]

Why would you not…insulate the T-Fittings & Elbows?. BTW?, When you crush insulation? it loses its insulating value.

[@hammerandrake]

Thanks for watching. I will need to deal with it later

[@donaldhorwath4851]

No no no! You don't cut wire with your tin snips! Get some side cutters.

[@hammerandrake]

Yeah thanks for pointing it out. I also felt it’s not the best practice

[@keith536]

It's great stuff until mice or rats decides to chew through it and make way into your home.Then you have a nice leak heating your crawlspace or basement.

[@hammerandrake]

Thanks for that reality check

[@michaelsolis6994]

You zip first and then tape

[@dannydongyeonkim9174]

집에 고칠게 많으시네요 ㅋㅋ

[@hammerandrake]

ㅋㅋㅋ 시청감사 ㅋㅋㅋㅋ