R32 Control Arms on the Mk4 GLI!

[@YTias]

Such a clean install video!! Cant wait to see the painting videos!!

[@Iyellatbabies]

Love the content kid. Keep it up!

[@thecolemangarage]

Your comment means a lot to me, thank you!

[@theyoungchevalier]

Great job Coleman

[@hotbox604]

Would you mind posting the part numbers.

[@luisro7782]

no sway bar????? 😂😂😂😂😂😂

[@MichaelGreen-p2h]

Did you need to get r32 ball joints as well🤷🏼…to go with the r32 control arms?…or are the ball joint all the same?

[@christianluna-baruch6867]

Would they fit a 99 cabrio?

[@Periclestcc76]

where was the anti roll bar?

[@thecolemangarage]

You are the only person who noticed! I had to cut it out so the CV axle would stop rubbing on it.

[@Periclestcc76]

@@thecolemangarage and how does the car feel? don't you feel that it is unstable? or weird noises?

[@thecolemangarage]

It’s been like this for about 4 years and I can’t tell a difference. It drives and handles fine. I do know the rubbing noise stopped 😅👍🏽

[@KingGene]

So then TT control arms should also fit an MK4 Jetta is that correct? Please let me know my control arm bushings are trashed.

[@thecolemangarage]

That’s literally what this video is about.. 😅

[@KingGene]

@@thecolemangarage Just wanted to double check because my TDI mechanic said I would need different struts and a steering rack? Why would he tell me that do you know? Also, what year of TT would you get the spindles from to put on the MK4?

[@aidanward28]

did you use your gti spindles or converted to r32/tt spindles ? was curious if r32/tt lca and ball joints work with the gti spindle

[@thecolemangarage]

I reused the factory GLI spindle, ball joint works. In the future I would like to upgrade to TT spindles though.

[@aidanward28]

@@thecolemangarage word thanks for the help bro!

[@Koketone23]

Donde puedo comprar esas piezas que instalaste ??

[@MichaelGreen-p2h]

Would these control arms also fit to the mk4 Jetta 1.9tdi pd130 anyone know🤷🏼

[@ricktifferpowers1762]

Did you use r32/tt ball joints or mk4 ones?

[@thecolemangarage]

I used R32/TT ball joints. They are slightly different. Mk4 ball joints have loose bolts that go “upwards” into a V-shaped bracket.. R32 ball joints have threaded studs pressed in, with a locking nut on bottom.

[@elpaparaxy]

Did you eliminated the from sway bar? Does it affect anything on the car and the aligning?

[@thecolemangarage]

Yes front sway bar has been deleted. It was rubbing on my CV axle because the car is so low. I don’t notice any difference and it’s been like this for 5+ years 👍🏽

[@olliecox060202]

how much camber does it add by maxing it out on those arms

[@thecolemangarage]

That is a good question, I will throw it on the alignment rack and see exactly. Follow for updates 👍🏽

[@paintednumbers4713]

Any idea where I can get those center hub caps?