R600 Intake Install on Our MK7 GTI

[@Deutscheautoparts]

- We appreciate your Support and Purchases! - Find all the parts for your VW or Audi! - www.shopdap.com/ R600 for MK7 GTI 2.0t and Golf 1.8t www.shopdap.com/mk7-gti-vwr-r600-intake.html R600 for MK7 Golf R and Audi S3 www.shopdap.com/r600-vwr-intake-mk7-golf-r-audi-s3.html

[@1sh0t1b33r]

Note for install: I'm not sure if there is a different version of the R600 intake now, but the top cover should be installed on top and not under the two front, side screw loctions. If you look from the side of the R600 scoop, you can see that it is cut out and is designed to wedge around the from mounting area. Installing the intake with the top cover off makes it super simple and slips underneath the factory mounts without a problem. The top cover then simply rests right on top and you don't have to shove it under the tabs. I had it mounted just like the video originally and noticed the scoop area seemed too low, and it was a bit more difficult to install because it was pushing the entire box slightly down at the front. After checking some other videos and pictures online, I noticed that the tabs were on top in about half of the install. That being said, the turbo noises and whoosh with this thing are awesome! Thanks ShopDAP!

[@robdelany7636]

These are aces. So simple to install and throw in a larger turbo intake and the response and drive is drastically improved. My Golf R was flashing the traction control light today in 2nd gear after fitting this. On top of a stage1 tune it's awesome! Highly recommend. Sounds great too.

[@markbia9761]

YOU ALREADY KNOW WHAT WE'RE GOING TO ASK FOR!!! SOUND CLIPS!!!!!! LOVE THE VIDEO, PAUL!

[@djorkode1]

What does this intake offer more than the stock intake? More air flow? An aFe high flow drop in filter can yield the same results right?

[@Great_America]

I highly recommend you buy the Spulen coolant hose to replace the stock hose. This allows for the R600 to mount more easily since the Spulen hose can be installed underneath the R600 housing.

[@aaronlawson1328]

Just installed on my 2017 fits, doesn't contact the coolant line like the unitronic did. Inlet temps are cooler than stock intake around 10 degrees above ambient. Looks factory too. Reading temps on my P3 gauge, love that too

[@993mike]

I really wonder about the dyno difference between this and just popping out the snow / leaf shield in the bottom of the stock airbox and running a BMC filter.

[@SamClark802]

I own this intake and 10/10 recommend. Great look, finish, and quality. Pair with the inlet pipe and Turbo 90 as well.

[@frankp500]

Thank you so much for the awesome video Paul! It went in smoothly and the sound with performance is great. Paul and ShopDap rock! Tune and downpipe are next!

[@death3443]

the 2020 Model now is available with a new designed cloth like filter (K&N style), still not cheap in pricing but finally a good filter without the risk of damaging the engine.

[@m.allmark]

Can't believe how expensive these are. I used to have a ramair intake on my GTI and it sounded awesome. Ramair don't make one for the EA888 gen3.b intake so ile probably go for the R600

[@chloeleedow7250]

Now I see why there is a coolant bypass hose that would drive me nuts that stupid hose over the top 😂 install would be much easier without it too I'm guessing. Good video thanks 😊

[@hackneo64]

I wish I bought this version instead of the cup version, looks much cleaner. The old cup intake does still create some kind of seal with the insulation on the hood pushing on the heat shield. This just looks better.

[@kaydc2]

Nice I got the r600 and Inlet pipe from u guy love it

[@Deutscheautoparts]

Thank you so much for the purchase.

[@trickyd-wc7bq]

A foam panel filter in the standard airbox will do the same job for 10% of the cost of this.

[@CosminCraiova]

foam filters are bad, just get a KN one.

[@thomassabol4565]

That’s what have. Drop in vwr filter

[@trickyd-wc7bq]

I’ve got to admit. In the end I did buy the R600 (a couple of years ago now) and it’s been good on stage 2 R.

[@juelz4516]

@@trickyd-wc7bq so your original comment is null and void.

[@trickyd-wc7bq]

@@juelz4516 it’s good but I still don’t think it made enough difference for the cost of it. My stage 2 car didn’t make any extra power on the dyno with it. Overall I should have saved money and stuck with the panel filter but I fell for the hype.

[@KaDaJxClonE]

why does the secondary air intake not have a filter? where is that air going?

[@rockhead1731]

It plugs into the airbox just like the factory so you don't need a secondary filter for it APR and others just do that so they can get more money out of you and make you buy additional parts

[@thatguyjason3083]

_ VesBraun the metal clip that it goes on is the filter. It was pre installed that’s why it seemed like there was no filter

[@e.r.1492]

It doesn't look like the passenger side really lines up tight?

[@brightenupcc]

There is a reason why VW designed the air inlet and box as separate items. The fit and finish of the R600 is well below OEM standard.

[@tylerflath89]

Can you elaborate on this?

[@GTI_CHHA]

Very nice install video, thanks.

[@tuerevalation]

CAN YOU MAKE A VIDEO ABOUT UNITRONICS iS20 UPGRADE FOR THE 1.8

[@myphonelist]

Is there any performance gains from this set-up? Can you post some before/after benchmarks.

[@kznspraynozzlesandsystemsp8075]

Thanks a lot for the info and great videos 👍😆

[@WhenzLunch]

I got the injen for the sound..love that sound...

[@andrew.triggs]

Me too. Great sound. I wonder how this one sounds.

[@momotaro9229]

Is the air filter washable?

[@3tjrunner3]

im looking for an intake for my 2013 Golf 2.5 4dr, any recommendations?

[@thomasmodica930]

Where does that vacuum line on the intake attach to? I lost mind and have no idea where to get another one and where to attach it

[@nicholasmumford5616]

I heard that Racingline revised the filter design early on due to filter disintegration. Do you know when they revised it?

[@dapper512]

Hi Paul, I enjoyed this video and will use it as an install guide. Just to ask - I think someone else may have had the same question a while ago - would you recommend the inlet pipe and Turbo 90 offered to complement the intake? Thanks.

[@MrHenryScoots]

Can you recommend any performance mods for golf 1.4 tsi mk7?

[@gaijins30]

and at 6:51 you know that foam filter will be falling apart into your turbo intake after 24 months as did mine. Only issue with this system is that crappy foam filter. NOT DESIGNED TO LAST

[@DuarteCosta993]

@Deutsche Auto Parts can i install that on a golf mk7 tdi?

[@Shiro_Mazoku]

Wondering the same thing.

[@chafamtz]

I love my R600, I got it from you guys, super easy install, couldn't be more happy.

[@Deutscheautoparts]

Thank you so much for the feedback and the purchase. We appreciate it very much.

[@hughesz09]

Can you make a video about the radiator coolant hose over the top of the intake how to remove it and replace it I’m looking to get a raceline

[@jaymcnaughton8368]

i wish you would show the parts before you install them.

[@mooshee6977]

If this is made by Volkswagen racing and is a Volkswagen approved product, would it void my factory warranty if installed or would I be safe installing it without fear of my warranty being voided? I have a 2016 Volkswagen Golf GTI S. Thanks!

[@JJF_FILMS]

Moo Shee wait a while I have a 2015 GTI and the first year I had a couple issues with the Evap system and oil pressure censors. that was replaced for free by VW. If you don't care about the Warranty than go ahead.

[@hectorrios5883]

Hey guys. is there a way this could fit the 1.4 tsi? (ea211), as I see it replaces the whole stock intake system, It may to route the turbo inlet to the right instead to the front tho....

[@misterpr3sid3nt46]

got the exhaust sound also louder?

[@dtivladsgavriliuc6259]

Hello, thank you very much for this video. I just wanted to ask if the presented R600 intake is compatible with the Skoda Octavia 3 RS TSI 220 PS? If it is compatible do you need to have some changes done or is it a plug and play kit? Many thanks in advance for your answer.

[@tombeneteau5138]

I have seen where that foam has deteriorated on other owners. Have you seen this problem? Have they upgraded the foam material?

[@stevenpires]

Does this part for the vw tiguan 2018+? It's the same mqb platform

[@mr_adriano_]

the coolant hose above the intake - any long term damage/wear to the intake?

[@VauhtiVeikotRacing]

Does this fit to b8 passat?

[@ZOMBIFORC3]

Sound clip??

[@emanuelpires8835]

What purpose does the vacuum line next to the SAI serve? Is it strictly a vent for the vacuum solenoid or....?

[@johncarr123]

how much HP does it gain? you guys have a shop in Charlotte?

[@zues2013]

None And there will be little to no sound out of it due to the closed box style Air being carried towards the turbo (hot or "cold") won't matter because the turbo will heat it up due to rpms and using exhaust fumes If what you want is a boost in power due to cold air invest in an intercooler don't waste your time or money on an intake

[@Caymanec]

it does up to 15hp

[@Caymanec]

Are you stupid? Who installs custom intake for hp gain only? Intake is to supply more air for tuned Stage1/2/3 engines!

[@Caymanec]

you are stinking so much! go to the school if you even cant read!

[@iKenzohh]

Fugiwaratofu860 bunta wouldnt be proud of u if he would’ve seen what u write here Ofc u gain more hp and torque with a closed custom air intake. Here in germany many tuners did a comparison and few dyno runs with and without the r600 or hf series 3 intake. U can get 5-18hp more , depends on your engine. And +10nm So yes, it gives your car more cold air to breathe and more hp. I recommend to install a turbo inlet and outlet too, so you get 30hp more just with hardware. Trust me , its no bullshit.

[@specialkeh]

awesome video guys. I just recently bought the audi s3 2016 +. Im assuming same procedure for the install but just without the SAI ? If you guys have an s3 8v would you be able to show an install for that on your channel?

[@Deutscheautoparts]

Congrats on the new car. Yes the S3 would be pretty similar. This is the correct one for your vehicle. deutscheautoparts.com/r600-vwr-intake-mk7-golf-r-audi-s3.html

[@specialkeh]

okay thank you!

[@adridepando]

Hello I just bought my first brand new gti mk 7.5 how long should I wait to install a new intake ? And by doing it i can hurt my warranty also ?? Can you give me a couple of options of intakes that I could get .

[@shutterclix]

Does this intake require a tune? What happens if you just bolt it on a stock car?

[@ultramoo]

I didn't notice you mentioning anything about oiling - some people in the forums have mentioned it needs to be oiled before put in. Is this true?

[@seanoflaherty]

ultramoo It should be oiled at the factory.

[@SoliiD]

I have a european golf 7 gti. So do i need to order the golf R air intake? Because i don't have the 2nd (smaller) nozzle/small air intake on my golf mk7 gti..

[@jonathanpisoni9767]

hi mate. DO u think should be a good deal, with a stage1 REVO? (i have already inlet pipe and muffler delate R-Line)

[@danielabbate9001]

do u make one for a 2014 r-line beetle

[@lesuperspecialiste974]

hello how many horses did you win please ????

[@sirfartsalot1328]

Wanna do an intake on my mk7.5 GTI, but just not completely convinced it'll add anything aside from the DV whoosh. And they're crazy overpriced. Thought my old carbonio intake on my old 20valve was expensive. These new ones are just ridiculous.

[@donlaw3109]

Dose that intake work for 2016 VW R-Line tiguan? if yes what the cost ?

[@joshriles84]

I know it's 2 years later, but yes i have one in my 2012

[@DailyRitualW4r10ck]

Paul, you are the man!! Thanks for the videos. Questions for you ?? What do you do with all your MK6 upgrades that you had on yours?

[@Deutscheautoparts]

Never had a MK6

[@DailyRitualW4r10ck]

for some reason I thought you did. oh well. I was gonna ask if you had any of the pieces lying around that I could buy off of you. But but it's all good. thanks.

[@709andre]

Who was polishing the car? These white spots on the plastic are hilarious.

[@josemontano9210]

Is this available on the GLI?

[@R0nnyb0y7]

Will this fit a Jetta mk6 2014?

[@Supersoee]

Where did you buy sir? Any web link?

[@razerone49]

Wow, this is by far the most pain in the ass intake install I've seen on any gti/golf r/r32 since mk2's. Factory intake is not the bottle neck. I'd say do an intake of u want more sound but otherwise, from a performance aspect, it's just doing much.

[@razerone49]

*Butchered by auto correct

[@rockhead1731]

Unless you revamp the entire intake system and get a tune the air box by itself does nothing except make the car louder

[@rockhead1731]

But it looks cool

[@masi992]

Hi Paul. Great video. What is the purpose of the secondary air inlet pipe? Thanks!

[@Deutscheautoparts]

You would need this to filter the air coming into your secondary air pump. Take a look here for more info on secondary air and what it does kzbin.info/www/bejne/poO2nZKqiJieopI

[@masi992]

Thanks!

[@emanuelcunha3175]

I could install in a 2.0 TSI 2014 Bettle???!!!

[@thomschraa2001]

Is there a good way to route the cooling hose underneath the intake?

[@tomclark2602]

RACING LINE DO A REROUTE PIPE

[@Fareediification]

Is this intake be installable on s3 saloon 8v?

[@DrSmoke909]

Is this intake Carb legal ?

[@Le_Boboche]

Does it fit a 2.0 tdi ?

[@hogueraleksander5868]

if you claim that there are gains on a modified engine, what are they? and what's the gains on a stock engine? cold air should equal gains on both ends, right?

[@aaronlawson1328]

Hoguer Aleksander I have have a corsa catback, this intake and a stage 1 tune from unitronic, the intake was the last mod. My boost is up 1 psi with this intake vs stock. Intake sound is nice too. 2017 GTI

[@limleon875]

How many hp gain?

[@LarryRichelli]

Notice how there are slats above the grill for the air to come into the air box on the passenger side but they are not on the other side. I drilled 25 holes on the other side to let more air from the grill in. This intake has intake vents on both sides. It would seem that the ones on the drivers side will get no air without doing something like this....what do you think?

[@zarehshahinian3766]

Is there a reason you guys chose the R600 over the APR or Unitronic intake? Are there any downsides to APR and Unitronic that Racingline made up for?

[@Deutscheautoparts]

Those are all quality brands that will likely get similar results. We offer the Unitronic and Racingline versions though ; )

[@zarehshahinian3766]

I noticed the unitronic intake utilizes the stock air inlet plastic piece by the grill, is that not restrictive compared to other intakes that take that part out or replace it?

[@jasonalexander2370]

Will this part work on a 2017 Tiguan mk2 2.0 T?

[@rishimalhotra1347]

Just bought one for my Tiguan mk2 and it fits perfectly👍

[@Tekka579]

Bad design with the hose overlapping the box. Also the gaps in the front make it unattractive..

[@silentedge4]

I just purchased one, and nowhere did I see mention of the need to drill a 40mm hole to attach the secondary air filter to the intake... not on shopdap, usp, urotuning, ecs, or racingline themselves. I notice the metal SAI is already drilled in as shown in your video, Paul. Do y'all ship these with that work complete? Or did you do that step before this DIY video and forget to mention this?

[@silentedge4]

now I need to go find a 40mm hole saw for my drill before I can install. Also what are your thoughts on foam vs cotton filters?

[@budeiri123]

will this intake work on my regular mk7 1.8 t?

[@Deutscheautoparts]

Yup you can find it here deutscheautoparts.com/mk7-gti-vwr-r600-intake.html

[@Deutscheautoparts]

+budeiri123 yes it would

[@StanderGarage]

and the sound ???....

[@jimmcfarland3446]

Once again it's an air filter not an intake manifold...

[@TheStraycat123]

does the r600 fit on the golf r

[@Caymanec]

yes

[@Deutscheautoparts]

Yes this is the version for the MK7 Golf R deutscheautoparts.com/r600-vwr-intake-mk7-golf-r-audi-s3.html

[@vigariomanone]

Que cansino

[@tredfxman]

I just recently became owner of a 2017 GTI Clubsport! Have anyone heard anything good/bad about the intakes from Brittish "Forge Motorsport" ? (i know theyr very good, i just want YOUR opinion).

[@rockhead1731]

Good company that builds Quality Parts that do virtually nothing for performance, but they look and sound cool

[@tredfxman]

@@rockhead1731 Yeah acually read bout it. So i decided to keep stock intake 😄 3 Years later i still havent swapped, but if i would it would be Integrated Engineering's full carbon intake v2 or whatever the name is, only because looks & sound! 🙂

[@Wakardy]

WTF....400 for that half intake? Better go with INJEN instead

[@LowMedow]

OVERPRICED

[@richardgodsell6664]

Why would anyone install an R600 onto the stock hose and turbo elbow. Money down the drain

[@georgepap3613]

nah, i'm payin a guy.

[@danejensen6064]

Looks like an expensive 2 hp

[@gtboss281]

Geez what a waste of money, stock box with a drop in filter people 🙄

[@SuperSpetterpoep]

5 hp.

[@dfuzz78]

Seems like you're replacing plastic bullshit with more plastic bullshit. 😆

[@brianfoster98]

dfuzz78 lol

[@dickermeinschoner6794]

was ne scheiße.. hahaha... xD

[@kiskopter]

useless mod

[@louis4357]

Is this intake CARB legal?