Rabaconda Street Bike Tire Changer Tutorial - How to change a motorcycle tire

Visit street.rabaconda.com to order yours! Change Your Own Tires Fast, Easily, and Efficiently.
0:00 Introduction
0:29 Compatibility
0:49 Before use - IMPORTANT!
1:51 Dismounting: Setting up
2:33 Dismounting: Breaking the bead
3:34 Dismounting: Duck head installation
4:42 Dismounting: Rotation blocking
5:43 Dismounting: First bead
6:45 Dismounting: Second bead
7:39 Greasing the tire
8:22 Mounting: First bead
8:58 Mounting: Second bead
11:10 Duck head removal
11:30 After use

[@curbjumper]

I have been paying dealers to change tires during 50+ years of riding, on over 40 different motorcycles; I just used the Rabaconda for the first time and I wish I would it would have been available years ago. Over the years dealers have scratched my rims, taken too long to change tires on wheels taken in off the motorcycle, and appointments and drive time have been required. I consider any comment on this channel submitted by anyone whining about the price to be an irrelevant comment; there is a point on the graph where the inconvenience of having to pay someone else to do a job that is not difficult to do yourself combined with the ineptitude and/ or lack of caring of many shops crosses over any price I pay to enjoy the convenience of installing a new tire any day of the week, any hour of the day, at my convenience. If you seldom ride, don't ride very far in a season, have high mileage tires, are a penny-pinching oaf in a sport/ hobby that requires an infusion of cash.. or if any single one of those things by itself applies to you, keep in mind that no one is forcing you to buy this product; keep paying someone else to change your tires and feel free to put your silly comments here complaining about the price. This is a great product for a decent price; anyone who has ever attempted paying for research & development, engineering, legal fees, marketing, patent application, and production for a new item, may understand this.

[@bronsonFlynnmulligan]

Yes. But when it’s half the cost of a pneumatic machine.. might as well get the real thing!!

[@happyshoe1]

This is the real deal. I’ve now changed 4 tires and each time it gets much easier. Changed tires on a BMW K1600 and a Kawasaki Concours 14 so far. The first few times are a struggle as you need to learn the proper technique but after that this thing is golden. Thanks to the Rabaconda folks for making this awesome tool! No more wasted time at the dealer, it’s so nice being self sufficient.

[@Rabaconda]

Thank you so much for your feedback! It means the world to us. We wish you Happy-happy tire changes!

[@glencarson3721]

I currently own 7 motorcycles, two of which are dirtbikes. This tool will save me a fortune in tire changes.

[@Rabaconda]

Thanks for saying it!!!

[@jamalkhoury7906]

But does the duckhead work on dirt tires with tubes? I noticed rabaconda sells a dirt bike changer, but I wonder if this one handles dirt bike tube tires too. I just bought this street bike changer so I’d like to know

[@jahmic]

Wow, this would have been SO much nicer than drilling holes in my floor way back when I did trackdays. I'm definitely ordering one before my next tire change

[@Rabaconda]

that was the goal - make a tire changer that does not have to be bolted to ground :)

[@kendieken1863]

It was a pleasure meeting you at Sturgis this year! I can't wait to receive my machine and put it to work!

[@ScottHD]

Used mine for the first time today. Definitely a small learning curve but the second tire I got finished in 5 minutes. This thing will be a money saver!

[@Rabaconda]

Alright! Happy tire changing!

[@haraldp.5630]

Hello, I just bought one of these tools. It really works that easy. I just changed the tires on my KTM 890. I'm very satisfied.

[@Rabaconda]

Thanks for the good words!! It means a lot!

[@BrewCityRider]

Excellent tutorial! Just waiting for my unit to arrive. I've got two tires to change out as soon as it gets here.

[@mikefuss2430]

I just received a Rabaconda Street Tire Changer and am most impressed with the quality of construction and the company really has done everything possible to make this task simple and easy. The manual with the changer is excellent as are the online videos. I've tried tire irons and jumping on the tire to break the bead in the past. This is a much better, clean, safe way with no wheel damage. I am very pleased with this acquisition especially when you consider I live in somewhat of a backwater region, nearest dealer is 50 miles away, charges exorbitant prices for tires and even charges me to damage my wheels. I have three older bikes, difficult to get parts for and really can't tolerate wheel damage. This is an excellent tire changing system.

[@Rabaconda]

Thank you for the kind words!! Means a lot to us!

[@xlr8r3VA]

This is a really cool life changing tool! Every bike enthusiast should have one. No more paying Stealers to do it for you.

[@Rabaconda]

That's right! thanks :)

[@robertkennedy3230]

I currently own 2 motorcycles ('15 FJR1300 & '14 CTX1300D). I ride commute to work 5 days a week, plus pleasure riding on weekends. On a yearly basis, I replace both tires in each bike. The last time I swapped tires they charged me $70 per tire. , this is me bringing my own wheels to them. After doing the math (70 x 4 = $280 dollars), that's half the cost of the machine. This machine will pay itself in 2 years.

[@chrisklhall]

I did a similar calculation when bought a Sealey tyre changer 5 years ago. I've upgraded to the Rabaconda and sold the Sealey.

[@somestuffithoughtyoumightl6985]

That’s crazy! Cycle gear charges $50, or $25 I you bought the tire from them. I use spoons; takes half hour.

[@SniperZaku]

U can also charge your friends a lil for the change 😮

[@lemongrabracing71]

I just got my rabaconda changer yesterday (Sept 7th) And I can do changes in about 10-15 minutes now within the first 2 changes of doing it for my 2014 R6. BEST PURCHASE EVER 1000000% worth the wait for this amazing work of art. Keep it up!!! I would love to see an attachment for the tire iron when working on changes the tires instead of putting the iron on the floor. I was probably going to get some piping and zip tie it around the leg for the tire iron.

[@MrMannyjr69]

Where u older it from and how much was it ?

[@blandrooker6541]

Just received the starter kit 3 weeks earlier than expected, very happy about that! Tried it out this morning and was soon reminded that IT PAYS TO READ THE MANUAL CAREFULLY! 😋 I seriously struggled to dismount the first bead over the duck head with the tire iron, then went over the instructions and watched this video again. Don't know why it works, but putting the valve stem at 3 o'clock works. After that, everything went smoothly, it gets easier with practice. As others have said, the included brush has an issue with the bristles pulling out, but not a big issue, everything worked as advertised and I'm very pleased with it, except now all of my riding buddies want to use it.... 😛

[@Rabaconda]

Alright, Bland! Thanks for the feedback. As for the valve stem. By placing it at 3 o'clock, it won't stay in the way for the tire to fall into drop center, plus its in the last sector when working with the duck head. Hope it helps.

[@christopherdekonstrukt444]

I plan on buying a Harley Softail Standard which up until this year has spoke wheels so I'm glad you showed the strap.

[@rhettharrison3291]

Superb tool. Worth every penny. Makes tyre changing an enjoyable hobby.

[@Rabaconda]

Music to our ears! Happy tire changingˇ

[@ittybitbobo7657]

After watching several videos i have come to the conclusion that im soooo glad i bought a nomar tire changer.

[@1Bigduff]

Why is that? What tire changer did you purchase? TIA.

[@pocotaligoswampfox4789]

The first tire I ever changed was with my new Rabaconda tire changer, and it was the rear tire of a Honda VTX 1800C. That was a tough one to learn on! The wheel stop pin wouldn’t fit with the rim & brake rotor configuration, so I had to use the strap. The wheel & tire are extremely heavy, the tire is extremely stiff, and they both fought me every step of the way. It was not easy! After that experience, I feel like I can change any motorcycle tire.

[@Rabaconda]

Stiff tires are a real training. After that nothing scares 😆

[@jeffjones4071]

What a great tool!!! Definitely will save riders money in the long run on tire changes

[@collinsbrianm]

Just ordered my Street Tire Ultimate kit, on the waiting list for restock in April 2023 . All good things are worth waiting for. I'll probably be putting my No-Mar up for sale/free. I'm on my 4th house move in 7 years, and I just don't have it in me to unbolt that thing from the slab and move it again. What really sold me on the Rabaconda was the portability vs. the No-Mar. So wish me luck thanks for the vids!

[@iron-brigade]

I have the No-Mar system - and I can't wait to throw it in the garbage.... going to purchase this one.

[@Rabaconda]

We really appreciate your trust and give our best to not let you down

[@davidavery4973]

I got this a few days ago and just got to try it changing a 250 tire on an 18" rim, and it worked awesome even with a fairly cool temp tire. Awesome job on an awesome machine!

[@Rabaconda]

Alright, thank you for the feedback! that's music to our ears that the process was painless with a 250 tire.

[@twowheelvideos]

This device is perfect... I do trackdays, and having the power to do your own tire changes when it suits you is the way to go. It took me no time to learn how to do it. One of the best investments I'v done on gear!

[@Rabaconda]

Thanks a lot for saying it! We’re very happy to hear it makes life easier

[@christopherdekonstrukt444]

My shop here locally charges too much, 3 uses and this tool will more than pay for itself.

[@ironhorsegladiator5034]

Amazing invention... Goodbye Nomar Tire Changers.

[@csiautodetail]

is this better than the no mar tire changer? I was thinking to buy a Nomar one, I have motorcycle with spoke wheels and other with alloy wheels will this work for both?

[@MarkG-ny3lu]

Just finished changing the rear tire on my KTM 1290 Super Adventure. I replaced the old Heidenau K60 Scout with a new one of the same type. They are extremely stiff, so it was a bit of a challenge on that type for my first try with the Rabaconda Street Bike tire changer. To be honest the hardest part was breaking the bead on the old tire. It was a slow go for me with several trips back into the house to watch the next part of the tutorial video, but I can say with complete assurance that I would never have manged to change the tire by hand without the Rabaconda. Great device! Now my only problem is that I don't have an air compressor that puts out enough air to seat the bead on the new tire. Off to Harbor Freight I go. LOL. Good work guys!

[@Rabaconda]

Most awesome!!! Heidenau K60 Scout is the mother of all stiffness!! 😜 We used this tire as the ultimate test. By the way, one of the early test units were turned into a pretzel 🥨😆. But our respect to you sir! When breaking the bead, it helps to rotate the wheel a tiny bit when pushing. Some how it helps to break the bead better

[@rhartley2456]

The last time I mounted a K-60 scout was with motion pro irons and a C clamp😂. Needless to say some found words were said. I love this product and will be buying one soon. Paying dealerships to mount my tires is a no-go for me. I'd rather be a little more self-reliant.

[@lopsided1]

Just got mine and it worked perfectly to mount some Rosso IV's to Warp 9 supermoto wheels. Recommended!!

[@Rabaconda]

Huge!!! Thanks for the comment!! 💪💪

[@hamador1]

Just bought one of these street tire changers and did the front tire on my ‘14 Indian Chieftain. Dunlop’s American Elites are very stiff but warming the new tire up, 2 of the black drop center tools and plenty of tire lube helped. Getting the old tire off was more work than mounting the new tire. Have to use the supplied strap since the large brake rotors won’t let you use the pin to prevent rim rotation. Great system and I like how it breaks down and stows in the supplied bag.

[@Rabaconda]

Huge thanks for your feedback!! This tire is a well known stubborn one. Yes, the strap can be the solution in these instances

[@tkell8494]

Always remove the rotors from the rim when changing tires !

[@Rabaconda]

@@tkell8494 why would you do that? Not needed at least with our tire changer

[@disarray-qh4qw]

Just did my first tire change using my brand new Rabbaconda machine. Only two complaints... The supplied bead grease brush is terrible, it sheds bristles all over the tire and inside the tire as I was lubing it with the lube. I used a tire warmer to heat the new tire before fitting it and this made the tire lube dry out a lot more quickly so I had to re-apply it as I was working the tire onto the rim with the machine, which meant more loose bristles from the brush. My second complaint is that the supplied drop centre tools are useless on a twin disc 2010 Triumph, they just don't fit onto the rim unless you remove one of the discs first, which is a pita. However, let me say that this is without a doubt, the easiest to use tire changing machine that I have used so far in many years. I think the design is great, and once you get the hang of how it works, it is easy to use. Thank you..

[@Rabaconda]

Hi Dis. Thanks for the comments! I'll take your feedback on the brush to our Product team. To avoid bead grease drying, please apply it right before you use the duck head. Otherwise when you apply it and then start heating up the tire, the bead grease will dry up. Regarding the twin disc 2010 Triumph, I kindly ask you to send us a picture at [e-mail] so we could also see the problem and understand what you mean. Warm regards,

[@zodbutt6408]

This thing works great....i followed along with the video and it worked perfect.....even on a 250 r18....Pretty sweet!

[@Rabaconda]

Thank you so much for the good feedback!!!

[@TeamSimpsonRacing]

Great video. Will this work with a dunlop slick racing tyres which is extremal hard and ridged?

[@chrisklhall]

Great video - thanks

[@ianlawrie919]

Splendidly demonstrated 👌👍

[@Rabaconda]

thanks!!!

[@FATBIKEMIKE]

Just got mine two tires changed relatively easily however, I found the duck head a little flexible?? it slipped off the rim and jammed against the tire. Had a hell of a time getting it apart because there’s no way to back it out. I’m not sure if I did something wrong. It was my first attempt. Otherwise seem to work fine. Any thoughts?

[@12xpack99]

Would this work for surron lightbee and ultra bee tires? Around 16-21 inch tires

[@stanwerner7484]

Looks good!

[@nigelthompson874]

Very good. Don’t tyres have a coloured dot to position at or opposite tyres valve to help with balancing?

[@Rabaconda]

most have, yes

[@tokyo7842]

How important is the second drop set tool lol? Pretty sure i just have one. Its still changeable with only 1 correct?

[@Rabaconda]

Yes, you can work with one as well!

[@arindar4310]

can i use this in my scooter click which its tire is 100/80 14?

[@neilm58]

I have a pristine Honda SP2 still on the original tyres, which now, of course, need changing. I am admittedly a little paranoid about marking/bruising the rim finish😳 . Is there a part of the Rabaconda process that has particular risk? If so, are there any techniques that can eliminate or at least reduce the risk?

[@Rabaconda]

All parts that come into contact with the tire and the rim are covered in plastic. But even then, we cannot guarantee anything as it depends too much on the operator and not only the machine itself. But some tips. If you have the option to practice on an old tire before, you can learn the technique. We recommend using soapy water for dismounting and bead grease for mounting (as it helps to seal the bead better). The process that needs your attention when operating the duck head: Make sure that the tire bead is completely pushed off from the bead rest into the drop center from both sides of the tire. When pulling the tire iron to bring the tire over the duck head, please make sure that the opposite section of the tire is forced into the drop center. You can use the bead breaker for that. The wider the section pushed down the better, but don’t push it too deep as this causes additional tension on the bead. Also, we recommend starting the rotation slowly.

[@neilm58]

@@Rabaconda Thank you very much. Very helpful.

[@robertobarrios3487]

Can this tire changer be used on street bike carbon wheels? I have a set of BST wheels on one of my bikes and this tool would be a great addition to my garage if it is "carbon safe."

[@mikenorgard477]

I Aldo have carbon BST rims and would like to know the answer to this same question.

[@LUISFERXY]

We use a similar tool from another manufacturer. We tend to have a lot of problems with the front wheels. Is there a video of how this machine works with front wheels? Thanks

[@Rabaconda]

What made front tires different with the other tool? We’ve done both and see absolutely no difference.

[@kevindelk]

So it true it won't work on a 15" rim?

[@FabioV1970]

Can it also be used for car wheels?

[@Rabaconda]

Like the Darkside riders do, installing a car tire on a motorcycle rim? yes. Rabaconda is designed for motorcycle rims, but if the car wheel dimensions fit and you can center the wheel, it could work on car wheels as well.

[@frostdetailer8612]

Hola para realizar una compra, realizan envió internacional ??

[@toreedvardsen7993]

does this work with 18 and 21 inch enduro/cross rims as well?

[@Rabaconda]

Absolutely not with bib mousse. With air tube can work, but rim lock makes it a bit struggle. Just tire irons and the 3-Minute Tire Changer is way easier

[@alessandrovattolo592]

When the rim is completely closed like the fatboy, how do you lock it?

[@joras18]

Can this tire changer be used for a YZ450FX or any dirt/trail bike?

[@Rabaconda]

Not a really good option. The Rabaconda 3-Minute Tire Changer and good set of irons is way easier. The rim lock makes it a bit struggle with the Street Bike Tire Changer

[@oldjeep]

0:45 do not use with big mousse? What are you saying there? That being said, I own one and it works great

[@Rabaconda]

Yes, the Street changer cannot be used with bib mousse inserts. You cannot get the tire into the drop center from the other side, as the mousse “inflates” the tire. There is simply no room to operate the duck head. Same as you cannot use an industrial tire machine to change tires with bib mousses. For the rest of the tires, tubeless or air-tubed set ups, the Street Bike Tire Changer is a good option.

[@oldjeep]

@@Rabaconda OK - never heard of a bib mousse. Goggled it and you might want to make a note about tire inserts, or whatever those are for.

[@PKpopdU]

Please do a carbon wheel. I’m tired of turning “tire guys” loose on my expensive BST carbon wheels. Also, can this function with dual 330mm front disks? Thanks.

[@billybean8859]

Find the right “tire guys” and you will not have any problems. There are plenty of folks out there who can do a first class job even on carbon fibre rims

[@Rabaconda]

We haven't tested it on a carbon wheel, but our friend CJ has, and he has not reported any issues. kzbin.info/www/bejne/gHmkaaNtiNihrNUsi=tF-iJpy5yRz2dI7X&t=556

[@fredstah714]

Genius engineering here.

[@Rabaconda]

Thank you!

[@TheMetalmachine467]

I have a 2018 harley-davidson fatboy with solid rims will this work on these

[@Rabaconda]

Is there any hole in the edge of the rim to put the strap through? Some Fat Boys have. If no hole, then it would not work

[@BrewCityRider]

Update: Just took a look at my wheel and I don't see why running a strap through one of the large holes in the rotor wouldn't work. Not sure, but I found one commenter on another video that said he used the Rabaconda to mount a tire to his solid disc wheel by "blocking" it. I think he somehow wedged a wheel chock between the wheel and the tire changer frame. He said it worked fine. I will be trying this with my Softail custom rear wheel as soon as my unit arrives.

[@helliermason5910]

Will this work on cruiser tyres like Harleys and Indians ??

[@Rabaconda]

Yes it does! Stiff tires need 2 Drop Center Tools, warming up the tire and use of bead grease. We’ve done even Goldwing

[@user-cd9wv8uq4l]

How do you secure the wheel if it is a solid wheel design?

[@Rabaconda]

If you have solid rims, you cannot use the Rabaconda tire changer, as there is no way to stop the wheel from rotating

[@oneshothooligan6279]

It's all about the duck head in the ratchet that makes this stand out from most home garage changers.

[@Rabaconda]

Thanks! We wanted to make it better than anything else on the market

[@darwinsinthavong8323]

Is this tool meant to be used with the wheel bearings taken out of the wheels first?

[@Rabaconda]

No-no, definitely keep the bearings in!

[@darwinsinthavong8323]

@@Rabaconda Ok thanks. I was trying to use the rabaconda street bike tool to change out the tire on my Kawasaki z125 pro which has a 12 inch wheel and the wheel would not fit because I could not slide the wheel down into the tool. The hole where the wheel bearing is was too little for the tool but looks like it would fit if I did take out the wheel bearings. I ended up taking the wheel and tire to a shop to get changed because I didn’t want to take the wheel bearings out.

[@manuelrivera6873]

any issues with 2016 BMW R1200gsa's?

[@Rabaconda]

No, no reason. We have a video with BMW GSA at our channel

[@KokohG4UL]

Does it ship to Indonesia way across the earth?

[@Rabaconda]

Yes, we ship worldwide. You can order directly from our website, rabaconda.com, or write the team at [e-mail].

[@martinajuergen2175]

Does this work with car tires to?

[@Rabaconda]

Rabaconda is designed for motorcycle rims, but we have customers who mount a car tire on a motorcycle rim (Darkside)

[@Easy-rider30]

I search every where using this Rabaconda taking the front tire of street bike, but some how I can't find any? all I see is it's all rear tire? thanks

[@Rabaconda]

How about this: kzbin.info/www/bejne/i6mkemeHl9Whh5I

[@Easy-rider30]

@@Rabaconda that's person is having a hard time, because he just got the Rabaconda, do you have a video doing it your self? I'm only asking cuz. before pulling the plug and get one. thanks

[@Rabaconda]

I have one by me on an adventure bike, KTM 790 Adventure, 21” wheel. Would that interest you?

[@Easy-rider30]

@@Rabaconda I got a BMW R1200RT will the duck come with the tire changer will work, or do I have to get the updated one? Thanks

[@Rabaconda]

@@Easy-rider30 for RT you only need the BMW adapter. As long as it’s not a wire spoked wheel, original duck head works

[@daniloobial7443]

How to order? N how much?

[@davidbeauchamp9663]

Please make a video with a full dress bagger back tire. I keep seeing speed bike and cross bike videos.

[@Rabaconda]

We need to find one bagger to do that video. It’s on the to do list

[@dangalli1]

Perhaps a Yamaha Stratoliner, Roadliner or Raider?

[@bauchtanzpraktikant]

KTM 1290R ..working ?

[@Rabaconda]

yes, definitely

[@sprflyenya]

if you are a light dude trying to break a hard bead, you might need to get a fat friend to help you out. otherwise this tool works very well

[@oldspiced]

you should make one of these for E-scooters

[@Rabaconda]

yep, that's in the pipeline

[@oldspiced]

ive been working at a scooter shop and it suuuuucks lol send me the prototype for testing XD @@Rabaconda

[@BikersBrain]

I would like a Japanese instruction manual and a video. Please let me know the agency in Japan.

[@Rabaconda]

We don’t have a Japanese manual for the time being

[@rynpaulbert]

Anyone fit 200/65 Pirelli Superbike slicks with this?

[@Rabaconda]

There’s not much difference in each tire brand and size. We’ve done softer sport tires, stiffer touring tires, everything

[@pdzdrz]

Unless you want a Wilde goose chase I recommend you look elsewhere for a tire I preordered the first batch in July 18 2022 and I still have not received an answer a tracking number or refund they are just ignoring me at this point I had to call the bank and file a dispute this Will follow with a formal complaint!

[@Rabaconda]

Absolutely no problem to cancel your order and return the money. Any email we’re get with that wish, we act immediately. We haven’t seen yours. As you read from the website where you made the order, all orders after 1st of July will be delivered from second batch that will be shipped starting from September. Let us know your order number please to cancel it. Hopefully you can give us a new chance one day

[@glencarson3721]

Mine is set to be delivered today (9/01). They have always responded to my emails with satisfactory responses.

[@curtis5852]

No way thats the right size tire for that rim 😅 make it make sense 😊you gotta be kidding us

[@MuhammadHabibi-zt4jj]

Coba prodak ini di produksi di indonesia

[@siti.khanifakhanifa9081]

Saya ingin membeli alat ini .. tapi jarak jauh karena saya dari indonesia

[@Rabaconda]

Anda dapat memesan langsung dari website kami dan mengirimkannya ke Indonesia. Kami menawarkan pengiriman standar, yang memakan waktu sekitar empat minggu untuk tiba, tergantung pada pemeriksaan dan izin bea cukai. Mulai proses checkout di situs web kami, dan sistem akan secara otomatis menghitung perkiraan yang benar berdasarkan detail pengiriman Anda. Kami menagih dalam Euro, jadi konsultasikan dengan bank lokal Anda untuk mengetahui nilai tukar yang benar. rabcaonda.com

[@adrianaetchart1938]

Just make sure, everyone, that the sprocket is either off or on the bottom. :( Otherwise it's very easy to use.

[@Rabaconda]

Thanks for the tip!!

[@halttunen7281]

This machine is almost perfect but I have to change my tyres 65x to even out the cost If the machine cost 200-300€ i would buy it right away

[@Rabaconda]

We totally understand your point of view. The Street Bike Tire Changer offers the freedom to change tires wherever and whenever you want. You are lucky to have such a cheap tire change service available. In some areas it can be as much as 70$/€ per tire and add the time and fuel it takes to drive there. We are sure that riders who appreciate independence and self-sufficiency will find value in the Street Bike Tire Changer.

[@tmlhkyfn]

@@Rabaconda I have a smaller independent shop that will charge $50 per tire, if I bring them the rims/tires, but it's 1.5 hrs round trip, plus waiting to get them swapped. Local dealers want $120+ per tire. I have the 3 minute changer & so far it's been fantastic, for my Moto Guzzi V85TT (first generation) hoping I can make it work for the Yamaha MT-03 that's in my garage too

[@dannymagee8202]

Wow that tyre must have been put in an oven first to go on that easily!

[@chrisklhall]

I use tyre warmers - it really does help to have a hot tyre!

[@njarvis1977]

I set mine in front of a torpedo heater for about 5 minutes

[@rodzilla134]

@@njarvis1977 DAMN!! I see you posted this 2 months ago, but for me, you win the internet today! I have a Nomar and am looking at this Rabaconda. Even in summer, I cannot get the tires warm enough. I was just getting ready to go look at buying tire warmers when I saw your post. Duh!! I have a torpedo heater in my garage!! HOW did I not think of that?? You may have just saved me a couple hundred bucks! Lol.

[@bozzaa]

The music sounds like something out of an old porn movie?

[@Rabaconda]

🤣 sorry, we’re not too familiar with that genre 🤣

[@hoffmanshaven]

Chicka chicka bow wow 😂🤣😂🤣😂🤣

[@scorpion-ninja8228]

what? @ :47 Pete Moss?

[@jerkfacedumdum757]

I had to watch that a bunch of times too but he says something about mousse. Maybe bead mousse? But I know you can't use this with mousse inserts.

[@jerkfacedumdum757]

Just to be safe though, don't stuff your tires with peat moss...or did we just invent an awesome new tire insert? Try it and get back to me.

[@jerkfacedumdum757]

Just watched kzbin.info/www/bejne/fXOpepJ6eaeIf6M Compatibility - Street Bike Tire Changer Tutorial which is the first part of this video with subtitles. He says bib mousse.

[@alp3781]

I mean, this set looks cool, but my rear tire on my Goldwing runs me around 15K, the front 18K. The dealer charges me $56.00 to swap, if I bring the wheel. I walk around the dealer, looking at new bikes, have coffee and bagel and I happy. I am ok with that. Granted, I enjoyed watching this. Not for me.

[@Rabaconda]

Hi there. We've now tested it on a Goldwin as well. Changed a Dunlop American Elite to a Dunlop SportMax. Was it easy? No. Was it doable? Yes, in 12 minutes. Check it out: kzbin.info/www/bejne/l5CxopWaq7eFgbM But you have a good deal, a coffee break and a good chat is always a good idea, if you don't mind the driving and a little fee.

[@alp3781]

@@Rabaconda Well, with this interval of tire changing, I don't mined. We spend enough time in our cars, stuck in traffic, what is another 1/2 an hour. 😁😁😁

[@billybean8859]

Why are you folks paying so much to get your tires changed? , really should not be more than $20

[@alp3781]

@@billybean8859 Nothing is cheap in NJ. Labor rate is climbing like crazy. By the time the tech install your new tire, nice and easy due to the TPMS which can break and by the time they do good balancing, its costing. My calculations is fine by me to pay 45-60 per tire. The amount of miles I do a year is not a lot due to our Winter months here. So, its working fine for me. The Honda dealer does a great job when they are done with the wheels.

[@zappa916]

For 20% more I can get a professional pneumatic machine which requires close to zero effort. Good invention though.

[@iena270708]

don't take it, non-existent technical support, they don't respond to emails, it's not possible to request a refund, they say it works for 12" wheels but it's not true, non-existent assistance, I don't know how to get my money back. I'm sorry to write this but in 10 days they never responded to emails

[@Rabaconda]

Hello. Thank you for your feedback. We apologize for not getting back to you sooner. Do you have a good phone number or email address we can contact you at?

[@davidspin5353]

seems like a very complicated procedure...

[@Rabaconda]

Well, after few tire changes it’s pretty straightforward and easy

[@Masdyl1319]

Unfortunately, I cannot justify the expense of this tool. I mean, you're changing a brand new tire that hasnt been installed for any legnth of time, so of course, it's going to be easy. Demonstrate a real life scenario of a tire mounted for 6k miles. Also a local shop just did my Busa rear tire for $38.60. That was mounting, balanced and a new valve stem.

[@Rabaconda]

There are loads of videos of tire changers with very old stiff tires at our KZbin channel

[@Solo_adv]

All these comments saying that they used this product is b*******! ..But the sheep will believe 😂

[@mickeymouse4897]

Just bought a Constands, it's a complete piece of shit compared to this Rabaconda, yes these are pricey, but considering a piece of shit tool cost me £145 plus £50 import tax, it's worth the extra for a Rabaconda.

[@Rabaconda]

thank you for your feedback!

[@xanbiker]

20K Giveaway @Manybikes

[@2wheelAdv]

20k giveaway @manybikes

[@pilyomotoride7781]

Would this work on a scooter wheels size 14 and 15 ?

[@Rabaconda]

Yes, as long as the center hub is not smaller than 15mm