Lovely video, never thought I'd find a guide on this, Danke!
@arnolddumm5 жыл бұрын
Schön wieder ein Video von dir zu sehen
@Rabom5 жыл бұрын
Oh danke. Mehr sind in Planung. Diesmal zwar "nur" eine Vorstellung. Aber vielleicht auch inspirierend.
@arnolddumm5 жыл бұрын
@@Rabom sind sie immer. Ich habe mir nach deinem Video eine Ahle selber gemacht. Jetzt arbeite ich gerade am Nachfolger mit verstaufächern (Löcher) um die Nadeln und Ahlen immer dabei zu haben
@gelonder40465 жыл бұрын
Cool, deine Videos habe ich schon sehr vermisst. Beste Grüße
@InXone5 жыл бұрын
Thanx a lot for this review!
@albertrich78905 жыл бұрын
Lot of thanks for the video, such a clear explication
@ianusdivus4 жыл бұрын
Hallo. Danke für das tolle Video. Funktioniert das Gerät einwandfrei mit deutscher Netzspannung ?
@Rabom4 жыл бұрын
Klar 230 V mit passendem Kaltgerätesrecker.
@nosaltiesandrooshere74884 жыл бұрын
👍 = there is nothing left to say! Everything perfect! 👍 = es gibt nichts mehr zu sagen! Alles perfekt!
@Arch13014 жыл бұрын
didn’t get the thing,you can make branding stamp with this tool too?
@Rabom4 жыл бұрын
Mainly it is for creasing edges. But when you own a logo stamp you can choose the right temperature and stamp the logo easily.
@Arch13014 жыл бұрын
_ Rabom_ nice, thank you!
@pequodexpress3 жыл бұрын
Have you encountered any problems by not having the temperature monitored at the tips?
@Rabom3 жыл бұрын
No. I really don't have any problems. But I must say that I always make Tests. No leather is the same. If leather a works fine with e.g. 200°C than a similar leather needs maybe a few degrees up or down. So I always try out about the temperature. But the tips are fine. They always do their job.
@birgiteisinger-wolf29083 жыл бұрын
tolles Video - ich habe mir den creaser gekauft, weiss nun aber so gar nicht, welche Temperatur ich wofür einstellen muss. Kannst du mir da bitte mal etwas Hilfestellung bieten ?
@Rabom3 жыл бұрын
Gerne doch. Zuerst mal ist jedes Leder anders. Deshalb mache ich es immer so, dass Ich es ausprobiere. An einem Reststück langsam herantasten. Anders ist es nicht machbar. So braucht man für Blankleder höhere Temperaturen als für chromgegerbtes Leder. Mach dir dann am besten Notizen.
@michaellopez59603 жыл бұрын
Appreciated you candid explanation, so pleasantly, now I am sure that I would like to get one of this creaser. Thank you.
@Dahna_2 жыл бұрын
can someone explain why you can't just use a soldering iron and get some tips for it? what are the downsides of doing that?
@Rabom2 жыл бұрын
Because the temperature cannot be kept stable. And this is important for leather not to burn. Nothing is more frustrating than ruining the project with one of the last steps.
@glacialimpala3 жыл бұрын
I have to wonder why such simple tech like this has to have extra parts in the original, French version. They have some sort of fuse between the handle and the tip
@bazlur-Vancouver5 жыл бұрын
so how much total cost you what has been seen in your video? I'm looking for one, but the regad is very expensive. Chinese made are very difficult to guess good or bad.
@Rabom5 жыл бұрын
The Set shown is about 250€. I got no technical problems with this one.
@bazlur-Vancouver5 жыл бұрын
@@Rabom Thanks.
@dreamwarriors9794 жыл бұрын
Hab ich mir jetzt auch bestellt!!!
@Rabom4 жыл бұрын
Viel Spaß damit
@bazlur-Vancouver5 жыл бұрын
I have 2 questions: at what temperatures(tip temperature) you can get perfect crease? 2nd, If the tip size is F-2 and FN-2, what is the real distance it creased? 2mm or less from the end? for this brand. Thanks
@Rabom5 жыл бұрын
The temperature depends in fact on the leather. Always make a test on a piece of scrap. For the distances...please contact the seller of this product.
@beaver_squeezer42264 жыл бұрын
@Bazlur Rahman He explained everything perfectly in this video. Buy the machine and read the instructions. Maybe you could figure it out on your own.
@fhng5 жыл бұрын
Question, is the connecting end on the handle a M5 or M8 thread?
@Rabom5 жыл бұрын
M5
@fhng5 жыл бұрын
@@Rabom so, it is not possible to use M8 iron tip?
@Rabom5 жыл бұрын
@@fhng I'm not the manufacturer. But maybe it's possible to use an adapter. Please ask the manufacturer. He's a nice guy and will answer all your questions
@Kikuyumoja5 жыл бұрын
Diese Videos sind sogar auf Englisch sehr gut. Was ist mit der URL (rabomslederkiste.de), irgendwie gibt es nur das Blog bei Blogspot?
@Rabom5 жыл бұрын
Danke...was meinst du genau mit der URL?
@Kikuyumoja5 жыл бұрын
@@Rabom in einigen Videos wird eine URL beworben, die nicht erreichbar ist. Daher die Frage.
@Rabom5 жыл бұрын
Shit. Weißt du gerade ein Beispiel? Übrigens ...danke für den Hinweis.🙂
@Kikuyumoja5 жыл бұрын
@@Rabom ja, hier zB kzbin.info/www/bejne/bWjHq42VjrypZqM ich meine aber auch nur die rambomslederkiste.de URL
@bazlur-Vancouver4 жыл бұрын
I bought it a month plus ago and wasting a hundred plus $ buying all kinds of bullshit creasers. actually this one great and of good quality even than your youtube video picture. I believed your review after watching it.