Getting over my edge paint FEAR! 😱 and how you can too!

[@SP-nx8qx]

So, if you look at the manufacturer's instructions in most of those edge paints, it usually says as a last step: "if you want a shiny edge add a layer of clear gloss finish". I've watched maybe 10 videos from different people and nobody does that. Well, I do, and it works great. Tried it first on my own wallet and the edge it's still glossy after 3 years of heavy use.

[@uxb1112]

The most wonderful t edge paint I have come across comes from a company called Giadini and is easily available on the intenrt. Everything is non solvent based, water thinkable and cleanable, is mixable and comes in a huge range of colours and finishes and also several sizes.. I am a bespoke handsewn Leather handbag and luggage maker and am not associated with the Giardini company in any way other than having spent years attempting to find a decent edge paint since a time when the only option was Fiebling's Edge Kote. Personally I like to use the mesh roller pens but as said, this is a matter of personal preference. 10 years ago the choice was between a toothpick, a cocktail stick or a cotton bud on a stick so I am very pleased life has moved on.

[@alandrewgibson]

Great stuff Jo - have you tried running a hot iron along the edge to help smooth it. I have had some good results with Uniters primer/filler as a base coat too. They do a Briilantante seal coat which is perhaps not one for the purists out there but it is very very shiny! Perhaps some mixing play time for me is called for………

[@guidelineuk4876]

I have not tried edge-painting yet! probably will after watching your video, thumbs up

[@pequodexpress]

One tip to speed up drying time and for getting smooth layers is to skin the freshly painted layer with either a blow dryer or a heat gun for about 3 minutes before setting aside to dry completely.

[@rrr40]

helpful hints once again Jo. edges almost put me over the edge a few times. than you for all your help. keep well, keep safe, keep doing awesome work.

[@JHLeather]

No problem 👍

[@mariepindstruplinde1671]

Oh yes the patience is what I struggle most with too. And I am currently using my scratch Awl to apply with. Have seen some here on KZbin using a tiny bit of magic-sponge as an application method as well.

[@mechminded2207]

I imagine the vibrant contrast colours on the internal side of a case or wallet would look good.

[@JHLeather]

Definitely!

[@pepleatherlab3872]

Jo. A year late but finally caught your video. It made me smile to realize you came to edge paint the same way I did (pesky chrome tan leather😝.) I had an entire side of chrome tanned bison hide and it gave me nothing but trouble to edge burnish. (long sigh.) I too found it easier to apply acrylics with a steel wand (better control especially on fine edges.) I was wondering if you tried Uniters recommended primer? I've found it really seems to smooth edges and brighten all the lighter colors. It also basically replaces the first coat. Your thoughts on the Uniters glazes? Cheers! 🍺

[@thomasbeckett1245]

Tandy also makes a paddle that is specific for doing edging.

[@johnchristopherrobert1839]

I love to relax to your videos.

[@Alshevano]

I finally got over my fear and I’m diving in now😌

[@albertoarnaizt.9746]

Hola. Felicidades por el video. Como sugerencia para acelerar el tiempo de secado de la pintura es usar una "pistola de calor" o una "pistola para decapar" pintura, da mucho calor con poco aire y eso viene bien. Gracias por compartir. :)

[@brucelutz5699]

did you say that y only sand in one direction as to not raise the grain ? makes sense, i have been going back &forth. great vid thanks

[@JHLeather]

Yeah, by sanding one way you reduce the chance of any fluffy bits 👍

[@markedis5902]

I agree that edge paint is a pain but I’ve found that using it over tokonole gives a better finish. I use Giardini edge paints

[@JHLeather]

That's a great tip 👍

[@herbertwedermanjr239]

Have you had it peal off using that method?

[@DS-um9hi]

Have you tried the spongey graffiti marker applicator, not used it yet but people seem to have good things to say about that method.

[@SilasKennedy]

I have one, but it doesn’t flow properly for me. The felt tip always seems really slow to refill and makes going over edges quite scratchy

[@DS-um9hi]

@@SilasKennedy good to hear your feedback, do you have a preferred method? I just use an old scratch awl and take my time.

[@SilasKennedy]

@@DS-um9hi I’m not exactly an expert either. At the moment I’m using a bamboo skewer…

[@DS-um9hi]

@@SilasKennedy if it works it works! I often see those edge roller machines and get tempted by them, relatively cheap but I am a sucker for having too many gadgets and tools I never use/need! Happy leatherworking!

[@JHLeather]

Haven't used one of them, think that they'd be ace for stain but maybe the edge paint is too thick? I'll have to try some though 👍

[@BASSFISHINGMIC]

Great work

[@JHLeather]

Thank you 🙂

[@Pennyguin]

Mmm…patience is required! Not sure I have any to spare! 😂 Grrat info though.

[@JHLeather]

Haha I know, it's tough waiting for it to dry

[@thomasbeckett1245]

I’ve heard a butter 🧈 knife or cheese 🧀 knife 🔪 works also. 😂❤😂 hope your having lots of fun doing this.!

[@miriamhaines1793]

Thanks for this video. Just starting to use edge paint. I have the Uniters ones you are using. What is the metal tool you are using? Thanks, Miriam

[@JHLeather]

Its a metal edge paint stick, you can get one here: www.proatelierplus.com/product-page/stainless-steel-dual-head-edge-paint-stick

[@miriamhaines1793]

@@JHLeather Thanks so much for getting back to me. I've just ordered one 🙂

[@herbertwedermanjr239]

Have you tried smoothing the edge paint with a fileteuse?

[@JHLeather]

I dont have one of those but I sometimes use my single creaser heated up to help smooth things out

[@gustavocondegomez8412]

Eres muy Bonita!!! Pero no entendí nada, hasta que puse traductor. Muchas gracias por compartir tus conocimientos. Saludos.

[@daveturnbull7221]

How flexible is the finish? I've not looked at edge painting at all since it always struck me that if it was on an edge that has to bend then it would crack. Had a look at the Uniters and it says it's water based - does that mean it's acrylic?

[@JHLeather]

It does have a flexible finish so it shouldn't crack, I haven't had an issue with it 👍

[@daveturnbull7221]

@@JHLeather Thanks Jo. Suppose I should have done some testing myself instead of just assuming based on zero knowledge🤣

[@sensible3d406]

How do you feel about Edge Kote instead of Edge paint?

[@JHLeather]

I've not used the edge kote before so am unable to compare I am afraid

[@saileshbatchu6731]

your accent ❤️

[@johnnyc.5979]

I'll stick with vegtan, I don't have all the time in the world to wait for paint to dry, only to reapply and wait some more.

[@JHLeather]

😂😂 Edge paint is a faff that's for sure!

[@juliangonzales2916]

Saludos👍👍👍

[@googlecommies2039]

Good video, and thorough descriptions. Have you done any videos talking about using the electric creaser machine to heat the edge paint? I am a leather crafter also but trying to transition from hobby to small business currently as my local area is prime for these products.

[@JHLeather]

Heya, I don't have an electric creasing machine, but you can heat one on a crease heater and do it that way, there is a bit more guess work involved though as you don't have manual control of how hot the creaser gets.

[@googlecommies2039]

@@JHLeather thank you for the feedback. Also thanks for the great content, I enjoy watching your projects.

[@robertdelisle2412]

No matter what I e done edge paint cracks and flakes off .

[@mwhelan53]

OR, veg tan, quick sand and burnish, dab oftokenol or ag tranth burnish and move on.