Thank you so much for doing all these videos and sharing your knowledge!
@PowerRepublic Жыл бұрын
My pleasure!
@CafeRacerGarage4 жыл бұрын
Great tips brother :)
@PowerRepublic4 жыл бұрын
thanks boss
@CafeRacerGarage4 жыл бұрын
@@PowerRepublic I still need to bring my kart to you to have you straighten the axle, do you offer pick up by any chance?
@ibraheemh55864 жыл бұрын
Wow. Thanks mate, this couldnt have come at a better time
@PowerRepublic4 жыл бұрын
yeah we forget that we all had our first day sometime and that it isn't that easy!
@christianbuczko14814 жыл бұрын
Im told the local track reopens next week, so im hoping to put this into practice..
@PowerRepublic4 жыл бұрын
yeah boi, get some!
@LeFollon4 жыл бұрын
Good tyre pressure tool, I see many people on the track with a car version.
@ibraheemh55864 жыл бұрын
Where did he mention that
@LeFollon4 жыл бұрын
Ibraheem H it’s important 😉
@ibraheemh55864 жыл бұрын
@@LeFollon which one do u use?
@LeFollon4 жыл бұрын
Ibraheem H prisma
@ibraheemh55864 жыл бұрын
@@LeFollon cheers mate
@peterbarbas84744 жыл бұрын
Love the look of the PR sticker kit Derrick, keep up the great vids
@PowerRepublic4 жыл бұрын
Thanks legend
@zdenekpetera2 жыл бұрын
Hey, nice video as always 😊 What about tilting the kart like that at 4:00 .. to get it down from the trolley .. is it safe for the brakes (in terms of bleeding) or carburetor?
@PowerRepublic2 жыл бұрын
Hey Z, yeah it’s fine. The carb will level out and it won’t effect your brakes
@Asab9724 жыл бұрын
Great video as always, thank you.
@PowerRepublic4 жыл бұрын
thank you!
@heinrichwiedemann3646 Жыл бұрын
Ok, I recently discovered I like driving cars, around corners, as fast as I can. As a noob, what's better? A track/roadworthy rally/roadster, Speedway racing or karts? Do you do all three? Could be a great episode. It all kicked off with a day in a V8 at Queensland raceway. What an unreal experience! We backed it up with a few laps at the Pimpama kart track which was also cool and a surprisingly not the same but comparable experience. But I' sure nothing on a shifter-kart? Give us the low down please. I also have some mates that race speedway so I'd like to know you're opinion on that?
@PowerRepublic Жыл бұрын
karts are best for the amount of laps you get per day. start there cause its a mad buzz, at a fraction of the car racing cost. plus you get loads more laps which is perfect if you are a new guy
@BernieTheEvilF1Ruler4 жыл бұрын
I did learn one new thing: I need to get a rubber handle for my trolley instead of race tape :)
@PowerRepublic4 жыл бұрын
hahaha
@neilr48673 жыл бұрын
I did such a good job with customising my dpe trolley I kept it after selling my last kart 9 years ago. Just in case...
@knaufutown93944 жыл бұрын
Cooles Video zu den Basics!! 👍🏻
@PowerRepublic4 жыл бұрын
obrigardo
@gerardvolders26044 жыл бұрын
I think as a starter you also want to have a tire inflator. The one on for my bike also works for the kart. Always want to go to the track if i see your video's. Is there any online (good) video you know about how to change your rotax max piston? They say it is realy simple but i don't want to mess things up.
@PowerRepublic4 жыл бұрын
you can watch our videos, we have a video about to drop on the Rotax engine. Drop me a message through our website and we can let you know when it is ready
@spoileddoggproductions25594 жыл бұрын
I second the inflator. It's wonderful to have a small portable inflator right on the stand tray ready to go. I impulse purchases a Ryobi for $25. The battery lasts all day and it's right there next to a good air gauge.
@chriswilkinson-pearce37338 ай бұрын
Hi any tips on how to deal with a rear wheel hub slipping along the axle 🙏🏼
@PowerRepublic8 ай бұрын
yeah clean it with brake cleaner and emery paper. then apply some paint pen to the axle. then put the hub back on
@diegoavalle55513 жыл бұрын
Hi. thank you so much for this video.I would like to try another setup of front axcle (i have a Tony kart 401 Racer). For you, in what order should I start testing? 2 clicks of camber, then full caster , then lower the front end (with 2 small spacer)
@PowerRepublic3 жыл бұрын
yeah that a great start. make sure you record your 'feedback' from the test sessions. Also too, what exactly the problems/solutions/outcomes you are trying to achieve. Hope that helps Diego. thanks heaps for writing and tuning in! 😊
@BLITZKRIEG14 жыл бұрын
lucky my track has an excellent Shop right next door. My kart wouldn't start rang them and they drove out and replaced my spark plug totally free.
@PowerRepublic4 жыл бұрын
props to the local kart shops getting it done for the new guys!!!
@Fh774694 жыл бұрын
Hi can you do a Rotax max evo senior vs x30 such as lap times , top speed , engine performance.... please
@PowerRepublic4 жыл бұрын
Hey Faris, at which track?
@DemopVWgarage4 жыл бұрын
yeh the intro :)
@PowerRepublic4 жыл бұрын
epic times Niko
@miltiadiscolivas50604 жыл бұрын
What is the Denso plug youu recommend for the Rotax evo sr.?
@PowerRepublic4 жыл бұрын
hey mate, we use and recommend the Denso Power Iridium IW24 - IW31 heat range spark plugs
@josephkaratas85594 жыл бұрын
My karting starts tomorrow Sunday ik time
@PowerRepublic4 жыл бұрын
get out there!
@paulp14503 жыл бұрын
Hehe, the more videos I watch, the more I want to get back into racing...
@PowerRepublic3 жыл бұрын
Hey Paul, that's awesome news and pretty much what the videos are all about. get a kart, get out racing and have some fun
@paulp14503 жыл бұрын
@@PowerRepublic Hehe, I will do sometime. I'm in Brisbane, so I will come visit some day... Cheers. Great videos.
@CaesarAugustus274 жыл бұрын
Could you guys please make a video of Iame OK engine?😍
@PowerRepublic4 жыл бұрын
Hey Elliot, I'll have to get on to IAME and get them to send one out for me so I can take it for a burn
@CaesarAugustus274 жыл бұрын
@@PowerRepublic Great man! Looking forward to it!
@justinbernache9444 жыл бұрын
Where can I buy that trolley?
@PowerRepublic4 жыл бұрын
Are you in Australia?
@justinbernache9444 жыл бұрын
Nope
@PowerRepublic4 жыл бұрын
@@justinbernache944 where about do you live? Mondo Kart in EU are good and Comet Kart Sales in USA
@shayanspeed86434 жыл бұрын
Is it possible to transport the kart by a sedan?
@PowerRepublic4 жыл бұрын
yeah it sure is. you have to remove wheels and plastics
@pearlio72973 жыл бұрын
You could strap it to the top lol.
@BLITZKRIEG14 жыл бұрын
my wheels are so bent on that freaking trolley!!
@PowerRepublic4 жыл бұрын
update to the solid alloy's. second best thing you will buy this year
@Anthonyvelez133 жыл бұрын
Is that a Tony kart in the video???
@PowerRepublic3 жыл бұрын
sure is, DD2 with the power republic sticker kit
@Anthonyvelez133 жыл бұрын
@@PowerRepublic what chassis do you reccomend for a lo206 setup??? I'm new to this just getting into this