agrof's class 1 unlimited buggy on steroids - building instructions

[@Deutscherreichsbuerger]

Very nice modification, two L-motors are defenitely not enough for such a big model

[@gamemasterksdude280]

Thanks for making instructions for this. I’m about to order parts for this modification however, there is one part that I’m still not sure of. Would you mind telling me what the size was of the axles that you used to connect the rear arms to the chassis?

[@RacingBrick]

I think they were 8L axles

[@robertoricciardi6854]

Hi I have a problem with the cable connection .... can you tell me the cables the position of the cables? Do I have two 8878 2 sbrick batteries and 2 buggy engines? Using the sbrick app I can only turn on the levers and operate the steering instead the engines do not go maybe I have wronged the position of the cables.

[@implayingrobloxandwht]

0:37 what’s the name of that 5 technic plates thing I never know the name of the title

[@MegaMike1]

Are the wheels and springs from 9398? What is the part for the front wishbone? Can I use PF V2 receiver on 2 buggy motors and V1 for sevro and lights? Can I not use gear reduction is it going to improve the performance?

[@RacingBrick]

For the parts check out the rebrickable link in the description. PF receivers with the buggy motor will reduce their performance significantly.

[@MegaMike1]

@@gustavbreitbartnielsenasf1124 its better than the rc unit which is very big

[@gustavbreitbartnielsenasf1124]

@@MegaMike1 Definately.

[@randomrovo8438]

Subscribed!!!

[@mihaidobrescu5068]

Hi again, are the fake suspensions (doubling the real ones) with a purpose, other than decorative or imitating the real car?

[@RacingBrick]

decoration only

[@mihaidobrescu5068]

Thanks, thought it is some protection. Did you measure the speed difference? What's the gain of buggies over the 2 L's? How much the standard Lego batteries box powers the buggies? (the buggies come with standard battery boxes, not with sbrick or BuWizz) I have all the pieces, except for alternative power solutions here, and I'm curious. Don't you think the front servo is a bit weak? I don't like the original project there, it seems to rely on the servo to provide structural integrity, could that damage it? Don't the wishbones may break? They are so elegant... I love your front part, I would add some more protection there below. How about using a Lego train remote with a regular Lego IR receiver? Do the buggies produce a whining sound when working under the maximum speed? Or is this only true for L's and servo?

[@RacingBrick]

Huh, lots of questions :) You can see the speed difference in my other video: kzbin.info/www/bejne/aYWQl3ilg7Joiq8 Buggy motors are much-much faster than the L motors. You can power the buggy motors with a PF battery box but they won't be able to go full power. Buggy motors have their own special old battery box which is the RC central unit as well, they did not use Power Functions battery box. This one - www.bricklink.com/v2/catalog/catalogitem.page?P=6272c01&idColor=11#T=S&C=11&O={"color":11,"iconly":0} The front servo & steering solution is very elegant I think, it is sturdy enough. I restructured the front for protection at the high speed crashes. The wishbones did not get damaged. Lego train remote is very slow to control a vehicle like that. Buggy motors have a very distinct sound at full power, like: kzbin.info/www/bejne/l3XGmqqZa51nf5I

[@mihaidobrescu5068]

Interesting, thanks. Is there a real difference between the original battery box and the power functions one concerning the power it provides with the same batteries? These seem hard to find in good condition. It's nice to add a BuWizz power box, indeed, but I hate the idea of having a smartphone or tablet as remote due to potential responsiveness glitches.

[@RacingBrick]

Yes, there is a significant difference. The original can power 2 buggy motors with full power, the PF one cannot even power fully one buggy motor.

[@blackwarlock8741]

I am subscribed

[@UltimateLegoProductions123]

Can you put 2 PF normal battery boxes instead of train ones?

[@RacingBrick]

You can but that'll be pretty heavy

[@UltimateLegoProductions123]

@@RacingBrick I noticed you didn't build the second part of the buggy motor with spring. Do I do it upside down?

[@RacingBrick]

You need to build it symmetrically to fit on the other side

[@UltimateLegoProductions123]

@@RacingBrick For the paneling should I completely copy your color or build my own using 9398 parts?

[@RacingBrick]

@@UltimateLegoProductions123 it's your build, you choose whatever you feel like :)

[@evandromm]

Is it possible to power the two buggy motors with just one Buwizz? What do you think?

[@RacingBrick]

It is possible but not for offroading and for situations where you stress the motors, and not in ludicrous mode either. I was able to use that config in my speed recorder car with 4 buggy motors and 2 BuWizz 1.0 units but I had to avoid sudden hard acceleration.

[@nguyendangminhn]

Could you give me the extra parts only? I want to make this buggy version!

[@RacingBrick]

+Minh Nguyen Dang I don't have a part list, you can see in the video what parts you need additionally

[@nguyendangminhn]

OK, It's better if you could add some lights for night drive, LoL

[@RacingBrick]

+Minh Nguyen Dang I did not have any extras on this version. I'm still improving the smaller version, that one has lights added already.

[@nguyendangminhn]

Can't wait for it!

[@mihaidobrescu5068]

Hi, is there a technical reason for having 5 panel plates of 3 x 11 x 1 instead of 3 panel plates of 5 x 11 x 1, or is what you've had in your inventory?

[@RacingBrick]

No technical reason, I did not have 3 of them in the same color :)

Amit használtatok lengőkart annak mi a száma, mert én is ilyet keresek de nem találom?

[@RacingBrick]

Itt az eredetinek az alkatrészlistája, megtalálod benne - rebrickable.com/mocs/MOC-4247/agrof/class-1-unlimited-buggy/#parts

@@RacingBrick Köszi

[@robertoricciardi6854]

Why 2 sbrick? what happens if I get it 1?

[@littleraptor9898]

doesnt send out as much voltage if all outputs are connected. example: one output connected: sends full 9v. all outputs conected: sends 8.6 might not be that much of a difference but when one trips the safety overcurrent all trip them as well. soo yeah

[@gustavbreitbartnielsenasf1124]

@@littleraptor9898 And then the car dies (Kinda)

[@milangomber8624]

Látod azért vannak saját ötleteid!?

[@swagie_]

Is this version faster ?

[@RacingBrick]

Compared to the original? Yes it is much faster, check out my other video you can see both of them together.

[@maciejm.5144]

instructions pdf please...

[@karl1702]

+ 1 like + 1 suscribe. I am not english

[@massimotrickfingegameplays]

ihatry tha buld is not good forme