Big fan of this system...I use it on my BX25D to hold my pickaroon usually..... customer service of this company is great.
@GPOutdoors4 жыл бұрын
Thanks Neal. Looks pretty cool but would love to see you driving the mower through a lawn to see how much it shakes (or not). No support at the opposite end but won't know if one is needed until I see it in use cutting grass. Also, where do I carry my can of 50:1 mix so I can fill my string trimmers as I run out? Love to see local innovation - just want to see it perform while being used. Thanks again! Love the channel!
@Lee-At-Green-Pheonix-Rc4 жыл бұрын
That rack is cool love it wen a local small company makes modifications and accessories that fit like factory accessories to improve your equipment and make jobs more easy 👍
@patriotstanding62924 жыл бұрын
I’d jump on it if they could adapt a nice size toolbox to that mounting system for ROPS on my L39
@dlallwine4 жыл бұрын
Great looking product. What is the largest rectangular roll bar it will mount on? If you mount it on the wide side? And mounted on the narrow side? Thanks
@MessicksEquip4 жыл бұрын
The mount at its widest point is 3 1/8 inches.
@joshuaburkhead86654 жыл бұрын
Apparently you need to purchase longer hex bolts when mounting on rectangular rack greater than 2.5 inches? They have added spacers but the bolts don’t accommodate them...... 2019 L2501
@cmadk34234 жыл бұрын
That looks like a great rifle I mean tool rack. For what you're getting I would say the price is reasonable.
@KubotaMonsterBX23S4 жыл бұрын
Nice looking accessory. Great video. Thanks.
@JeremyTVOK4 жыл бұрын
Very nice product, especially for a local outfit. I’m curious to see how they hold up long-term.
@gkk20014 жыл бұрын
Thanks for showing this. It does appear to be well designed and made. I will give this much consideration. There is probably not a better nor more cost effective way to carry a strong trimmer on the rops.
@brucecampbell55734 жыл бұрын
After seeing your video of the racks360 I was sure if it would fit my BX2380 with the Curtis cab. Then I saw John Ritters video and decided to purchase it. Went to install it today but discovered my ROPS are quite a bit narrower than the ones on John’s tractor. The rack keeps hitting my cab no matter where I install it on the ROPS. Just wanted to make you aware.
@paulsalb16864 жыл бұрын
It would be great if you could mount a tool box
@TERRORoftheLORD4 жыл бұрын
Definitely!
@DJC9954 жыл бұрын
Very handy
@gus4734 жыл бұрын
Wish you could've strapped in at least one long-handled tool, like a rake or shovel! Maybe a future accessory can accommodate a fire extinguisher....? 🤔
@stanleybaker15204 жыл бұрын
That's really cool 😎😎😎
@dougmapper33064 жыл бұрын
I've been looking for a solution to keep a chainsaw on board a L2501 for a while!
@TERRORoftheLORD4 жыл бұрын
Cool, looks nifty!
@ohiofarmer2544 жыл бұрын
will a rifle fit in the holders
@MessicksEquip4 жыл бұрын
Should fit on the lower arms. It would depend on the rifle...
@Shane_O.51584 жыл бұрын
what about a bucket mount, or tool box - so you can carry a knife, loppers, pruners, hedge shears, a radio, phone, wallet, keys, bug spray, first aid, protective glasses.
@MessicksEquip4 жыл бұрын
Maybe in the future
@Shane_O.51584 жыл бұрын
@@MessicksEquip i noticet thairs a few old ones on the loader subject.
@gus4734 жыл бұрын
Yes, pretty good idea! Seems to be getting popular on ZTR mowers lately
@Green1976FJ404 жыл бұрын
Can you mount a chain saw
@MessicksEquip4 жыл бұрын
Not currently. There may be tool specific bottom arms coming soon.
@Tonyromeo19704 жыл бұрын
Cool accessory!
@travelinthru95194 жыл бұрын
Rite . Rite rite . Ur favorite word
@bobpurs4 жыл бұрын
Nice 👍
@Gen_X_Jimmy4 жыл бұрын
Nice
@alabamatoy4 жыл бұрын
Does it have a means to carry a chainsaw?
@MessicksEquip4 жыл бұрын
Not yet, but that may come.
@petermccormick85443 жыл бұрын
I ordered this partially due to the “partnered with/made by some local guys” comment, hoping to support local business. Disappointed with the yellow “Made in China” sticker on the box before I even opened it.
@dennismiller96812 жыл бұрын
So I guess "made by some local guys" means designed in the USA... but still built in China since the US hardly manufactures anything any more.
@tominsc99094 жыл бұрын
I was interested until you said the price. I'll stick with the brackets I welded and bungee straps.
@plumber77mjr4 жыл бұрын
Tom in SC don’t be cheap.
@dennismiller96812 жыл бұрын
Agreed. $150 to hold a couple tools !!! I have the BX25 with a backhoe and find that the stabilizer pads when raised can pretty well fit the handles of rakes and shovels. But I would like to have a few handtools (wrench, screwdriver...) so I'm thinking a soft tool bag tied above the ROPS folding point or the related knob. Maybe I'll even come up with a hard version that attaches using longer pins to replace the ROPS pins. People that have $150 or more to spend on this have way more money than I do.
@boltactionshooter4 жыл бұрын
Will it fit the L model tractors rops?
@MessicksEquip4 жыл бұрын
Yes. Today we tested BX, B, L and MX series. As well as all zero turns.
@boltactionshooter4 жыл бұрын
@@MessicksEquip Awesome. I will be ordering mine soon.
@boltactionshooter4 жыл бұрын
@@MessicksEquip Finally got to install my rack on my L model today. The brackets fit different size bars but they only come with one set of bolts??? I had to stop and go to town just to find some longer bolts that would have been included.
@k_ike_fishing4 жыл бұрын
Can I get a chainsaw in the mount?
@MessicksEquip4 жыл бұрын
Not currently
@k_ike_fishing4 жыл бұрын
@@MessicksEquip Hopefuly soon there will be a good one for the ROPS!
@horseblinderson47474 жыл бұрын
Ahh boo I wanted four poster awnings without having to buy a tlb or a cab at ten grand.
@jaxturner72884 жыл бұрын
I think it was your comment that got me hoping for that yesterday, I thought you somehow knew, now I’m very disappointed over nothing.... thanks.
@cherronwooten8611 Жыл бұрын
I just installed this product. I don't see it to be that great. First there is no way possible that this is going to hold the the roll bar without sliding down the roll bar. It doesn't matter how tight the screws are. The roll bar is iron and the tool is plastic. I have used another tool called the big tool rack. I think I prefer the tool rack over the rack360.
@cabinetmaker579911 ай бұрын
I've been using it for almost 3 years, and have never had it slide down. I don't leave the weed trimmer in it all the time but I have used it for that at various times. What I leave on my tractor year-round (unless I need to put the trimmer on) is a shovel and a large set of loppers. I have a piece of wire attached to one lopper handle that loops around the other to keep it from flopping. I have tightened it once or twice because I loosened it to move up higher. But it was still tight before I loosened it.
@adamprawda57724 жыл бұрын
i dont tkink i want long trimmer hanging over my head while mowing grass under trees
@mikep.5414 жыл бұрын
Are you kidding me. If I had anything hanging off of my roll bar, it would be ripped off in the first hour of operation.
@xzemis3 жыл бұрын
Ah well less than impressed with the durability. Had on for less than 6 monts and 3 arms broke off. One top one from trees, looks irreplacable. The lower 2 broke while removing a weed trimmer that fit a bit snug in the bottom. Any bit of twist and the snap right off.
@MessicksEquip3 жыл бұрын
They are really good about replacing these when they break. Shoot an email in.