Let's Go Over The SC300 Daily Drifter (Ep 11)

[@SpecialED-mc6cg]

Talk to Kevin from KSR down there in Florida. He has a few sc300's and I think atleast one is for parts

[@ChasingPerfection]

Not to mention he'd be a good guy to hook up with since he has a dyno. I mean LZ has a dyno too.

[@roseann5151]

Love this build this exactly what I’m doing to my IS300. Been watching everyday. Hope to visit you in Florida someday sir

[@JeffFadness]

This is way radder than swapping an already set up long block in. Something special about having some factory metal in the car. True hot rodding in the classic sense, working with what you got and being innovative. So sick. 🙌

[@hondapreludeba5]

i would love to see more of the trans setup specifically the crossmember. i am doing a zf swap on my sc400 and i know the cross members are the same so want to know more about how to copy yours if possible

[@RADIndustries]

I’ll get a picture of my trans mount for you

[@hondapreludeba5]

@@RADIndustries that would be amazing thank you.

[@HallowellsSpeedShop]

@@RADIndustries would also like to dive into the ZF trans swap. I picked up a ZF trans from a ‘96 M3 and would like more info on the swap. Albeit im doing it with an SC400, but still interested.

[@darrenviloria3340]

Could you talk about how much it would cost to build this from start to finish

[@gregoffthewall3720]

There is a sc 300 near where I live that’s just been sitting . I’m going to knock on the door tomorrow and ask if they would like it removed from there yard . Just saw Carlos arrieta ripping 1jz set up at the track last weekend . thanks for these videos and the motivation .

[@RADIndustries]

Yeah buddy

[@AlexOrtiz.FunctionMedia]

Man I've been binge watching all these videos. I'm so excited to buy another one next week!

[@danaburdett7090]

Mint! Love the sc content!

[@MrJuice315]

I'm sure you already know this but there is a bunch of options to switch from distributor to crank/cam sensor. From simple bolt on kits that mount a cam sensor to in front of the cam gear like golebys or fsm or SupraVworld. Also some guys have drilled the valve cover and mounted the cam sensor right on top. Lots of options for non vvti GE guys these days.

[@RADIndustries]

Yes, but I don’t want anything to do with that non sense. That’s why I picked this year

[@MrJuice315]

@@RADIndustries fair enough, i was just sharing the info for future viewers.

[@cdars1]

@@RADIndustries are those methods he mention bad? Or you prefer stock kinda hard getting engines in Barbados

[@mikeamerson8996]

That stainless TRE manifold works really well. We used one on a couple NA-T cars and it controls boost great.

[@racerx2084]

Got up tavarish now that your in Florida with him. Between him and Jared they have a couple SC parts. Both are big supra guys too. Probably can teach them some stuff. SC looks sick in black with the black rims.

[@RADIndustries]

I’ll look them up

[@patroberton489]

You should do drift week with the SC. You and Renae would get lots of seat time without using a bunch of tires....

[@bryansenulis7242]

Did u change all the rear subframe bushings and diff.. sure u did.. how much better did it make it

[@joshuaarce8092]

Supravworld makes cam sensors for the distributor GE’s

[@Xxuraloser111xX]

If you can't find a surround LRB Speed offers an aluminum replacement for the center console.

[@aidanc3049]

What oil pump would you recommend on a vvti 1.5jz build some say a 2j gte pump will create too high of oil pressure that the ge pump be safer option ?

[@RADIndustries]

I would use a 2JZ GTE pump. I have had nothing but good results with them

[@aidanc3049]

@@RADIndustries thanks

[@mylife-bz4zg]

I love what you called the handle so funny

[@nathanhuggins1385]

I know most people don’t talk about it but I was wondering if you could say how much the build has cost in total because I want to build one just don’t wanna just head deep until I know exactly is much I might be jumping into

[@RADIndustries]

I don’t know exactly what I spent on it. Maybe like 7k. Plus the cost of the car. But I had a lot of parts sponsored on this build. So I would think about 20k or even more to build the same thing if you did all the labor and fab yourself

[@nickadkins7765]

Depends if you want to do a drift setup, or just a turbo daily. The price gap is huge depending on your goals for your car

[@shaunperry811]

There’s a boat load of soarers here in Nz. If you need some parts Dan hit me up and I can try get some out to you

[@codys_fab]

Hey Dan, what do you think of the ZF transmission?

[@RADIndustries]

It’s ok, as far as shifting goes. It holds up to the abuse though

[@starlxrd868]

the only thing the sc is missing is cams to make it sound better

[@NecoOmnis]

At that 7psi low boost do you think the stock vvti rods would hold up. Did you do the ge block just to bulletproof. Im reqlly toying with building an sc vs a z as im a toyota guy at heart

[@RADIndustries]

The stock vvti bottom end would have been fine. I wanted it extra tough for adding power later

[@nickadkins7765]

Yea man for sure. Generally 420whp tuned properly is the cutoff for vvti rods. There's a guy on youtube who turboed his is300 with stock ecu, and he's making 7psi around 300whp reliably for the last 15k miles. Just has a boost guage, and afr guage to make sure they stay in the right parameters. Super budget setup, but it works. Says he's done it to 3 cars so far with no issues. Only charges $3k parts AND labor to do it lol

[@savagegaijin2166]

Look good in black sc300 is fire

[@volcom514]

Dope street car! BN sports Full Kit in black would be siiiickk tho 😂

[@abeboeve8012]

I can't go fast enough lmao 🤣 love that yeah time for some boost after that day.

[@RADIndustries]

Lol, yep

[@Daniel-RunToRoyal]

Have you ever concidered building a MKIII Supra? Great channel, thanks!!

[@Jovandesire]

Nice bro! 👍🏾✨

[@NateM13]

Love all the 2jz builds brother! I jusy wish they weren't so exspensive lol

[@SpaceRanger187]

no body it, how is she going to learn about having to zip tie the bumpers back on. Or it randomly breaking and dragging and you have to pull over..it needs the BN sports kit and a full cage

[@evo6swap]

love it thank you

[@Jovandesire]

What's next black custom interior?

[@RADIndustries]

I doubt it. To much effort for this car

[@drivewaybuilt8944]

Got to do it first I think

[@existance_auto5544]

I think I have all that stuff that is broken from the theft

[@hyper8545]

👍🤙

[@ChinitFxt]

I can’t believe people still try to steal radios

[@718stix]

I got the center peace....

[@Islidetoomuch]

Bro is y’all hiring 😭

[@DavelyDriven]

I'm back even tho I can't have ur tools

[@RADIndustries]

Ok

[@DavelyDriven]

A druggy disregard for drift for sure

[@javiertorres585]

I come across these videos a while back,and I was wondering if you could help me out with a few questions or a break down list of part’s I would need in order to run this same system that you have on this car on my 01 GS300 ? I’ve tried watching your videos back to back but it’s hard for me to figure out everything saying 🤷and I just don’t want to get anything wrong,”when ordering everything on your site cause I see you have a lot of stuff I’d need” !!! I know your a very busy person,so I’m asking with a big please and thank you for your time and effort to help me with these questions! 🙏🏻🫡