YES! With all my lights mods, i would make great use of all those channels and channel mixing capabilities!
@billdelong10 жыл бұрын
ha ha ha... looking forward to seeing more Lion Whisker tricks!
@Sid-cf6xv10 жыл бұрын
Hello can channel 3 or 4 be used to switch on & off Led lights? Also can anything else be done such as dimming or sequencing and how? Thanks
@lukebluske9 жыл бұрын
Hello Bill, and Siddharth, I just hooked up my RC3S to Lion Whisker last night and like you Siddharth, i was wondering if I could use channels 3 and/or 4 for my LED systems. They didn't automatically work and after spending an hour with the set up trying things and reading the manual I was unable to get any positive results. Bill, any thoughts? Do I some how have to incorporate a servo with the channel that allows me to switch the lights on and off?
@billdelong9 жыл бұрын
Luke Bluske ... I'll have to play with it and see what I can do.... are you trying to use the ground + signal to pull voltage to power the lights? If I'm successful, I'll post a quick video demo of it.
@lukebluske9 жыл бұрын
Yes Bill. Use the white wire to tell the channel to supply the voltage to the lights which are plugged into the respective channel port. When I first saw your review I imagined the ch3 as a light dimmer switch and then I thought what about using ch4 and mix it with the accelerator to make my tail pipes and "engine" lights glow as I accelerate. There has to be a way!!! Lion Whisker Needs You Bill! The Council of Cats have called upon your expertise!
@billdelong10 жыл бұрын
@Michael, I learned the inconsistencies were due to dated instructions, the specifications provided on the web store have superseded what is listed in the manual.
@franku211rc8 жыл бұрын
again thank you.. I figured out the reversing...thank you again
@richwalsh43328 жыл бұрын
How do u set the fail safe
@micnolmadtube10 жыл бұрын
So the voltage discrepancies could they simply be 4-6v is for nimh and 10v for lipo? Although 2s are way under and 4s way over..
@sjp7709 жыл бұрын
Can you set the button to move a servo to the other extreme and leave it there? i.e. traxxas t maxx reverse servo?
@bryankelly87919 жыл бұрын
hi bill I just read a review on this transmitter and it said its best used with nitro and gas cars. do you no why. do you use it with electric cars.and if so how do you find it. Thanks
@elliotbaltazar10 жыл бұрын
Thanks again for bringing this info to the community Bill! Have you seen any additional receiver prices anywhere?
@billdelong10 жыл бұрын
thanks... so far the only places I've seen are on eBay, just search for RC3S radio and you see some hits pop up... I've ordered a couple Rx's for $10 each
@joet-sk4sw7 жыл бұрын
nice showing,thank u it definitely helped me.
@franku211rc8 жыл бұрын
hello bill,just curious, so I now have a rc3s all thanks to your reviews ,and with it i purchased the gyro receiver ,so my question is , is it ok to run a cap and lights of that gyro receiver ? thank you
@billdelong8 жыл бұрын
+HIGH FRANK, I wouldn't power anything off CH3 if the gyro is active, you risk burning up both ports 1 and 3 if you do that... I've powered plenty of stuff on Ch4 where the only limit is whatever your BEC can provide through the ESC. Good luck!
@Bahecuk10 жыл бұрын
Thanks for the videos and review of this radio - recently my gt3b started glitching, which is not exactly safe with 1/8th scale truck, so I decided to order a gt3c as a replacement, but accidentally saw your review of RC3S at URC, as a result changed my mind and couple days ago ordered RC3s instead) Now trying to find a 2s/3s lipo that would fit inside, or at least 6*aa holder - 4*AA NiMh is not really an option in cold temperature with 4.8v minimum operating voltage...
@billdelong10 жыл бұрын
check out eBay and do a search for "LiPo Transmitter pack" then double check the dimensions of the battery tray to make sure it fits. I think the IP 2300mAh pack will fit nicely.
@Bahecuk10 жыл бұрын
Bill DeLong After some research I decided not to bother with Lipo in Tx - just ordered 4 Ni-Zn AA cells with charger from Hobbyking - cheap as chips and gives high enough voltage without any modifications)
@RVJimD4 жыл бұрын
Does the TX have a bind mode? Trying to figure out it there are any other RX it might bind to.
@billdelong4 жыл бұрын
There is no limit to the number of Radiolink branded Rx's that can bind to this Tx, however they must be the older version Rx, there is a newer 32bit RC4GS radio that uses more frequencies and will not be compatible with the Rx's used on the older RC3S you see in this video. There is nothing you need to touch on the Tx, just keep the Tx turned on and simply hold the button on the Rx until it starts to blink, then the Tx will automatically bind with it. Be sure there are no other Tx's turned on when you are binding a new Rx: live.staticflickr.com/3939/33823301106_460a314f58_o.png
@franku211rc8 жыл бұрын
a few questions if you don't mind ...how would you mount the receiver on double stick tape or Velcro? my other question is the steering is reversed ,should I rebind my receiver to the radio again ,because my servo reversing is not working . thank you
@billdelong8 жыл бұрын
+HIGH FRANK, I prefer to use velcro and I also use a rubbing alcohol swab to clean/degrease both sides of plastic surfaces to get the best bond. You can reverse the servo direction in the menu settings as explained in the manual: www.ultimaterc.com/forums/showthread.php?t=217514
@franku211rc8 жыл бұрын
hello again, just curious do you prefer a 3cell lipo or a 2cell lipo to run the radio, and what is or is there an actual difference between the 2 batteries in the radio ? thank you
@billdelong8 жыл бұрын
+HIGH FRANK, lately I've been running alkaline cells because I don't use the radio nearly as often because it's mostly a backup radio. But when I was racing regularly with it I prefered 3S just to have peace of mind on voltage, but really 2S is more then enough power too. I've also raced with NiMH cells and they worked just fine as well
@Warndog98 жыл бұрын
Can channel 4 (the momentary switch) be defined as a toggle (push on, push off)? Also, Is the steering auto-centering or completely smooth? If this transmitter isn't what I'm looking for, can you suggest a budget transmitter with a toggled ch 4 and non auto-centering?
@billdelong8 жыл бұрын
+Warndog, yes the Aux channels (3/4) are fully selectable between momentary or on/off as well as moved between channels or shared. In order to disable the auto-centering on the steering, you can simple remove the spring from inside the steering wheel, simply remove a few screws to get inside the case to remove the spring and then you're all set. Here's a demo of the Aux controls for you to see how easy they can be set: kzbin.info/www/bejne/o6mxoJd7fdWbfc0
@Warndog98 жыл бұрын
Awesome! thanks so much. You pretty much just sold me on this one. Oh and thanks for taking the time to make a follow up video!
@RatFinkRod8 жыл бұрын
I was just looking at this radio on AliExpress, and I have a question. If you have a car ESC (manual only shows servo) with forward/reverse motor function, will the car go backward like it's supposed to?
@billdelong8 жыл бұрын
+RatFinkRod yes, more info here along with other video demos: www.ultimaterc.com/forums/showthread.php?t=217514
@memomokl886110 жыл бұрын
Hello, can the RC3S work with electric car doing "reverse" at motor? In the manual, I only see the "break" adjustment on channel 2 when push the trigger forward. Thanks for the information, nice review.
@billdelong10 жыл бұрын
I'm not sure I understand the question, are you asking about mixing channels or simple reversing of each channel? Yes you can reverse each channel independently from each other as well as mix any of the first 3 channels together too.
@franku211rc8 жыл бұрын
sorry another question....what would the lvc on a 2cell would be and if I was running a 3cell ,what would the cutoff be...? thank you again
@billdelong8 жыл бұрын
+HIGH FRANK, the absolute lowest is 3.0V/cell but most battery manufacturers are recommending LVC's to be set somewhere around 3.2V/cell to 3.6V/cell if possible. More info here: www.ultimaterc.com/forums/showthread.php?t=121115
@subsonicreviews18358 жыл бұрын
Hi Bill, thank you so much for all your reviews . Because of you i just ordered a radiolink rs4g transmitter. Do you think you can explain to me how the failsafe works. is it through the receiver or transmitter?
@billdelong8 жыл бұрын
+Vasilis Analytis, Hi Vasilis, the FS is calibrated through the Rx, it basically goes back to neutral on the throttle channel when the Tx signal is lost. There is no calibration available for it with the Radiolink branded version, however there is a new firmware upgrade on the TS4G from HobbyKing that gives you the option to change the calibration for the neutral range on the FS.
@subsonicreviews18358 жыл бұрын
So correct me if im wrong. Once i receive it i dont have to do anything for FS? its all ready set for ch2 throttle ?
@billdelong8 жыл бұрын
+Vasilis Analytis yes, the FS was automatically set for me, in my video I didn't do anything special, though I recommend always keeping the Tx turned on when the Rx is on just to be safe.
@billdelong8 жыл бұрын
+Vasilis Analytis yes, the FS was automatically set for me, in my video I didn't do anything special, though I recommend always keeping the Tx turned on when the Rx is on just to be safe.
@richwalsh43323 жыл бұрын
how do you bind this radio
@franku211rc8 жыл бұрын
I read on URC about collaborating the radio,if I were to purchase that radio,do I have to do that,or just collaborate to the esc...? thank you
@billdelong8 жыл бұрын
+HIGH FRANK I've never had to calibrate the radio, only the ESC... it might be necessary to calibrate the radio if it fails to return to center properly. This is possible if the springs start to fail or if you spend too much time with full steering lock to one side. I can see that happening if someone stored the radio with another object resting on the grip causing stress on the spring, etc.
@dianastrmecki174810 жыл бұрын
Hello, I have an old Tamiya Dirt Trasher with Tamiya TEU 101BK SC wich used to have reverse....I can't figure out how to make it work with RC3S. Is it possible? Any Ideas?
@dianastrmecki174810 жыл бұрын
Thanks for your answer Bill, it was ESC in "racing mode" (no reverse).
@elliotbaltazar10 жыл бұрын
Bill, why does the switch return to its original position instead of an "off or on" state? I would hope that is adjustable. This would be needed for a high-low switch on a summit.
@billdelong10 жыл бұрын
Yeah I was hoping to figure out how to make it hold it's setting too, couldn't figure out how to make it work that way
@elliotbaltazar10 жыл бұрын
Ouch! That is kinda frustrating. Not a deal breaker if the radio does 2 channels extremely well. There are a ton of awesome features that outweigh the quirky switch. 7 character naming alone is huge, not to mention the voltage and chemistry flexibility.
@Ernesto-vi1pb7 жыл бұрын
Does this radio have reverse? I see the trigger looks really far forward does it go back? Also can channel 3 and 4 be used for lights? I'm wanting to set up my headlights on ch3 and light bar on 4 would that work?
@WhatsInsideOf8 жыл бұрын
+Bill DeLong im planning to use this on a truck with turret airsoft gun (left,right,up,down,fire button) my plan is,1stCh = steering wheel, 2ndCh=throttle, 3rdCh(vr) =turretgunLeftRight and 4thCh(pushbutton) =firebutton, my problem now is the turretgun up and down servo. can this be used using holding the pushbutton and the VR ? any suggestions ? Thanks :-)
@billdelong8 жыл бұрын
+WhatsInsideOf, it sounds to me like you need a 5ch radio Ch1 + 3 = Steering (mixing needed for tracked vehicles) Ch2 = Throttle Ch4 = V/R (turret) Ch5 = Fire button
@WhatsInsideOf8 жыл бұрын
thanks bill
@flcc779 жыл бұрын
Just wondering - I want a cheap radio for my son - so he can start to learn to Drive. My buggy is WAY too fast for him. Does this have the ability to dial it down so maybe max speed is 40% of full throttle? (It is an electric bushless lipo system).
@bucklee4368 жыл бұрын
How is this performing today? I never had a problem with my gt3b. going on 3 years same reciever. all the reviews I see on the web about the rc3s are yours lol. Can't find anything else.
@billdelong8 жыл бұрын
+Buck Lee , still going strong, I use these radios for my rental cars at the track and they are doing very well.
@bucklee4368 жыл бұрын
very nice! thx. picking one up soon!
@Clickbaiters10 жыл бұрын
How does this radio compare to tue Turnigy 3xs? I know I won't get a new radio anytime soon since I have 5 receivers for my 3XS but just wondering.
@billdelong10 жыл бұрын
in short, I like the RC3S better, if you want to see the long list of reasons why, then do a quick search for my review on "REVIEW: Turnigy 3XS" which is listed at Ultimate RC, my list is toward the bottom of the OP.
@Clickbaiters10 жыл бұрын
Bill DeLong Thank you for the feedback! I guess by the time I'm ready to upgrade (maybe 1.5yrs from now) these radios will be even better.
@koslan26468 жыл бұрын
hei . i have 2 crawlers and just got my rc3s tr and receiver. if I buy another 4 ch receiver for this, is it possible use the TR for both receivers by changing model in the settings?
@billdelong8 жыл бұрын
yes, this radio is capable of storing up to 10 model memories, there is no limit to the number of Rx's that can bind to it.
@koslan26468 жыл бұрын
Ok thank you for the reply:)
@dtem9388 жыл бұрын
Bill, Does this have true 10 model memory or just 10 presets like those cheap FLYSKY. Can it switch between already paired receivers?
@billdelong8 жыл бұрын
not sure I understand the question, it offers the same model memory feature as every other brand of radio that I've tested to include: Radiopost, KO Propo, Futaba, Graupner, Hitec, Spektrum and yes... Fly Sky too. Every system I've tested requires each Rx to bind to the Tx and you can switch between each paired Rx... there are some systems which only allow control of 1 Rx at a time to prevent accidental use of the wrong car, that feature is not offered with Radiolink.
@samsungs84307 жыл бұрын
how do I bind it to the transmitter
@billdelong7 жыл бұрын
push the bind button the Rx before turning on the Tx
@niceboy607 жыл бұрын
Hi , can you set it as motor increases speed , turning sensitive is decreased to avoid the car flipping over ?
@billdelong7 жыл бұрын
yes, you can adjust expo setting on both steering and throttle, plus you can mix channels as well
@franku211rc8 жыл бұрын
hi again another question, how or if you know ,how does a BEC handle with the RL rx. ?? thanks
@billdelong8 жыл бұрын
+HIGH FRANK... the BEC is voltage regulator built into the ESC, it converts voltage from your battery pack to a lower voltage somewhere between 4.8V to 6.0V typically. The HV Rx's from Radiolink can handle up to 10.0V
@franku211rc8 жыл бұрын
+Bill DeLong so I can run 2 servos off of the rx...?
@billdelong8 жыл бұрын
+HIGH FRANK, actually you can run up to 4 servos off the Rx, plus you can use channel mixing as well
@franku211rc8 жыл бұрын
+Bill DeLong ok so I'm running a HW 45amp HW justock, no matter what I still need a BEC ,right? thanks again
@billdelong8 жыл бұрын
+HIGH FRANK, pretty sure your ESC has a built in BEC, with voltage being supplied through the red wire from the ESC into the Rx, simply hook it up into Ch2, then your servo is hooked up to Ch1, when you turn on the ESC then power is automatically supplied to the Rx, hence the meaning BEC = Battery Eliminating Circuit because you don't need an separate battery pack for the Rx anymore.
@nikmahdi78213 жыл бұрын
rc4s receiver can bind using this remote?
@billdelong3 жыл бұрын
Yes but not the newer 2017 version of the RC4GS
@nikmahdi78213 жыл бұрын
@@billdelong much appreciate!
@Acemoddz6 жыл бұрын
My forward and backwards throttle control is reversed, how do i switch it?
@billdelong6 жыл бұрын
all depends on what your ESC instructions say... most require the Tx to be reversed... follow the manual to get into the menu option for reversing the throttle, if you're using a sensorless motor, then you might need to swap any 2 of the 3 wires going to the motor, or depending on your ESC, some will reverse the direction within the program settings of the ESC
@Acemoddz6 жыл бұрын
The car works fine with the original radio though, i figured changing the radio was plug and play I dont have a manual for the esc, it was just a basic drift car
@billdelong6 жыл бұрын
hobbyking.com/media/file/894042227X723523X18.pdf
@Blavlahoemzaza6 жыл бұрын
Iirc you can do a short press on the bind button of the receiver to switch forward/reverse.
@rworden964 жыл бұрын
does this have gyro in the menu?
@billdelong4 жыл бұрын
Yes, the gyro gain can be programmed to be controlled from either Ch3 or Ch4 within the menu settings
@rworden964 жыл бұрын
Thanks ! I’m deciding between rc3s and rc4gs. I hate the orange wheel on the rc4gs so that’s why I’m leaning towards rc3s
@billdelong4 жыл бұрын
not sure where you can get an RC3S anymore, you can easily remove the steering wheel and paint it any color you want as well
@herbois-et2uh10 жыл бұрын
Trying to buy one but try seee how good is it....pm me please can I use this remote to my rc crawler
@billdelong10 жыл бұрын
it should work great for a crawler, plenty of extra channels for a winch or whatever you need to add on!
@herbois-et2uh10 жыл бұрын
So all those extra channels I couldd use it for winch n light rite?...
@herbois-et2uh10 жыл бұрын
If I use this can I control to turn off lights n winch on the extra channel
@herbois-et2uh10 жыл бұрын
Thnks Bill Delong
@Scoobydcs8 жыл бұрын
whats the range like on these?
@billdelong8 жыл бұрын
+eatthisvr6, pretty much line of sight
@herbois-et2uh10 жыл бұрын
Hey bill does that remote work for rc crawler car
@onlyifusayplz540710 жыл бұрын
Every remote works with any car, but this one should be very well suited for crawling in particular, yes.
@herbois-et2uh10 жыл бұрын
Thnks a lot bro
@onlyifusayplz540710 жыл бұрын
Hey, if i can, i will always help someone.
@herbois-et2uh10 жыл бұрын
Liked you. sometime people doesnt help anyone they just want to keep what they want to know
@onlyifusayplz540710 жыл бұрын
Meelo weedhead Yeah, i don't like those people.
@Greg-js1bk7 жыл бұрын
Can I use the Radiolink receivers with the TrackStar D-Spec TS4G?
@billdelong7 жыл бұрын
I'm not certain... I don't have a rebrand from Turnigy to test, but I have heard of mixed results from others in the past and would probably play it safe and stick with the Turnigy branded stuff... it's not uncommon for the OEM's to create different firmware for the rebrands to make them not compatible even though the product comes from the same OEM, go figure?
@Greg-js1bk7 жыл бұрын
Makes sense. Thank you. Great cheap radio btw.
@crawlervideo7 жыл бұрын
Nice "how to" thank you!
@herbois-et2uh10 жыл бұрын
Think this better then flysky
@billdelong10 жыл бұрын
without a doubt... I've tested Fly Sky FS-GT2, GT3B and GT3C... all of those radios use direct sequencing which are prone to glitching and range issues as well as a myriad of defects from poor switches, failed charging jacks, faulty expo rates, reversed dial selectors, etc... far too many deficiencies with FlySky radios... so far not a single complaint with the RC3S yet... click the link in the description of the video for more details to include spectrometer tests.
@herbois-et2uh10 жыл бұрын
You think I should grab the rc3s or the fly sky
@herbois-et2uh10 жыл бұрын
Im lookn on crawling
@billdelong10 жыл бұрын
Meelo weedhead I'll never recommend a FlySky radio ever again... not after having all the problems I listed... I don't see any of those issues with the RC3S which appears to be a far superior radio to me
@herbois-et2uh10 жыл бұрын
Ok ill pick the rc3s I not gonna change mind...im gi for the rc3s
@flcc779 жыл бұрын
Just wondering - I want a cheap radio for my son - so he can start to learn to Drive. My buggy is WAY too fast for him. Does this have the ability to dial it down so maybe max speed is 40% of full throttle? (It is an electric bushless lipo system).
@billdelong9 жыл бұрын
+flcc77 Yes, you can adjust the EPA (end point adjustment) on the throttle control. The user manual is posted here: www.ultimaterc.com/forums/showthread.php?t=217514