Picking up a 1st gen 12a rx7 that’s been sitting for 20 plus years... thanks for all your videos man, made me fall in love with rotarys again
@tastefulguacamole770226 күн бұрын
The pdf that you put out is extremely helpful. Thank you so much. Love you long time
@jo-qp7mz3 жыл бұрын
Going to be rebuilding my first 13bt and I've been looking for the specs for free thank you so much love your channel lots and lots of cool stuff!!! I'm a rotor head as well I have two FC 10th AES and RX8 I want a repu pickup so bad!
@RADPotential3 жыл бұрын
Yea man!! that book should get you figured out!! The old trucks are super hard to find!!
@chikado6964 Жыл бұрын
how did it go
@lepoptarticus11483 жыл бұрын
This is gonna be so useful for my new turbo 2 project thank you
@thunder_lloyd3 жыл бұрын
Keep doing what you're doing! Very appreciated and I'm learning so much
@RADPotential3 жыл бұрын
Thank you sir!!!
@1989_golfmk23 жыл бұрын
very informative! great video!
@RADPotential3 жыл бұрын
Thank you sir!!
@edgermedrani56033 жыл бұрын
Super helpful
@michaelwallen7383 жыл бұрын
Thanks for that site.. thats a good one
@mokokawi Жыл бұрын
That link just shows manys manuals....which one do you use in video Also anyone sell the nice rotory seals and spring divider
@smokino93872 жыл бұрын
Real 👍
@luislozada34482 жыл бұрын
I have a nice question I need to ask you probably you can help me I'll have 12a and the balance that front balance and they're going to open it and he said he got the be like at 13b and I want to know exactly how much you weight
@mikesautoserviceandsales3 жыл бұрын
Awesome info. Really appreciated. Question. I have a 79 rx7 12a. Previos owner (Tried) installing 2 msd boxes. The car wouldn’t start with it, so my brother in law removed the boxes. Now I have the car and have no idea where the any of the original wires connect to To start it. Any idea where I can look for info? Thank for your time.
@RADPotential3 жыл бұрын
I have a video on setting up the factory late model ignition system.
@mikesautoserviceandsales3 жыл бұрын
@@RADPotential ok thanks. Is it the video that says; 12a and 13b rotary engine electronic distributor setup and ignition timing ?
@RADPotential3 жыл бұрын
Yes sir
@mikesautoserviceandsales3 жыл бұрын
@@RADPotential thanks
@hellaratchetek95583 жыл бұрын
Hey This is very helpful I haveThe same 13 b going into my FC but I’m using stock intake to turbo ever used a microsquirt ECU On any rotary platform
@RADPotential3 жыл бұрын
I haven't done anything with a microsquirt. used a few old haltech setups on some first gen turbo swaps
@Kiastinger1322 жыл бұрын
Some has a 1979 rx7 fuel tank ? And if I find a 1982 tank will it work for me?
@mugenkin13822 жыл бұрын
Me encanta tu canal, saludos desde El Salvador. me podrías regalar una copia en pdf broth
@skaterboi892211 ай бұрын
hello im a new rotary owner i recently got a 13b gls se I would love to turbo it eventually I read that 4 port is better for turboing whats your opinion on if I need to switch plates or just do low boost on the 6port or is it best for to do na
@skaterboi892211 ай бұрын
plan rebuilding it right away
@tufgamerdad90672 жыл бұрын
Not sure if it just me but the link doesn't work.
@BiasTeacher Жыл бұрын
Can't get the link to work anybody know if it's me or
@blacksheepautoworx53043 жыл бұрын
I gotta ask.... what do you do for a living to be able to have the time and funds to complete these projects? Seems I always have money and no time, or time and no money story of my life. Keep up the good work man enjoy the vids. Your yard looks like mine rx7’s everywhere
@RADPotential3 жыл бұрын
I am a civil engineer, I don't sleep much and I work in the garage. I wish I had more time for my projects. But its a balancing act of everything you mentioned. Money, time, effort. Luckily I bought a bunch of rx7s and parts when they were cheap maybe 5 or 6 years ago.
@blacksheepautoworx53043 жыл бұрын
@@RADPotential I know what you mean, I have had rx7’s since I was in high school and I’m 36 still have all of them. 80, 88 convertible, 85 gsl-se, 81 302 swapped as well. People say I have a problem. Thanks for the reply I appreciate it.
@IALON2 жыл бұрын
Can I use this manual for a 13B engine? 2004 Rx8
@inderpreetrait45033 жыл бұрын
I know this is off topic.... I’ve searched the forums and it’s just confusing... I have e46 323i with a blown m52tub25 and I want to swap in a m54b30... the m54 is complete with engine harness, dme, maf, injector,etc... what else would I need to make it a straight forward swap? Thanks
@RADPotential3 жыл бұрын
I mentioned it to justin, He mentioned something about a throttle pedal harness and the drive by wire system would need to be swapped as well! Hope this helps
@MrJasonburak3 жыл бұрын
Thanks, this will come in super handy after this winter when I start ripping apart my 4 12A engines. I was using this site wright-here.net/cars/cars.html for Rotary manuals but the one you shared is much more organized. Love your channel, keep up the great work!! Also you have any good places you can recommend for 1st gen interior/exterior items?
@RADPotential3 жыл бұрын
Used parts you will have to get lucky with some of the part out places. Rhinehart Rotary has been solid for me in the past.
@MrJasonburak3 жыл бұрын
@@RADPotential Awesome, thanks!
@Kiastinger1322 жыл бұрын
I have a complete 12A engine, transmission and wiring harness for sale
@garyrosenquist40713 жыл бұрын
Rebuilding an '83. Has rust on drivers side wheel well where suspension arm ties in. Wondering if youve had to deal with this. Any suggestions would be a plus.
@RADPotential3 жыл бұрын
Yea I have done the whole bin rot repair deal as well! Before the channel was up and going though. I can show what I did in a future video
@garyrosenquist40713 жыл бұрын
@@RADPotential nice. So your video where you are explaining the watts link on the badass rotisserie you built shows where the horizontal link by wheel well has the rust. So im gonna have to cut out a piece to fit and weld. Its like a plate that isnt structural but keeps water from getting into car. Its only on the drivers side not the passenger. I dont have Facebook or Id send a pic. Or I can Email.
@RADPotential3 жыл бұрын
I'll show it in a video next week!
@garyrosenquist40713 жыл бұрын
@@RADPotential Dude👍
@littleyoda76203 жыл бұрын
I have an 84 Gslse stock that's having trouble staying started. Its turn over run fpr a second and then die suddenly. Any idea what may be the cause? Distributor, or transistors?
@RADPotential3 жыл бұрын
fuel pressure? is the pump staying on? make sure the injectors are firing.
@blacksheepautoworx53043 жыл бұрын
Check your fuel system like rad said, also check filters and tank for rust, also fuel pressure may have enough for the first run but drops off
@somnus61793 жыл бұрын
Hey buddy, just letting you know that this video is not in the playlist for build secrets haha
@RADPotential3 жыл бұрын
I think it is now? I'll log on my other account and check from your view. Thanks