The Dream Desk!

[@SparrowStockwell]

The new paint color is very nice-much nicer. The desk looks great.

[@RagnBoneBrown]

Thank you! 🤗

[@kasroa]

For the mouse problem, I would recommend a large full size gaming mat (the kind that covers your whole keyboard and mouse work area). Your mouse will work perfectly, and you will reduce wear on the desk surface. It will also give you a nice soft surface to rest your arms and wrists on. I have a standard desk but never regretted buying one of those mats.

[@-Benedict]

Pro decorator here, and your approach with B-I-N primer is absolutely correct. Just use a knackered brush like you said, or a crappy disposable one from a pack in the pound shop. Don't even bother trying to clean them, it's a complete waste of time and products.

[@sarahpoyntz9215]

Snap, we use throw away ones or a sponge roller for bigger areas, it's just not worth the time and effort of cleaning them.

[@Greg8872]

I'll admit, when I first saw the video title, my first throught was "oh great another maker who got sent a free standing desk frame that they made a video out of adding a top". I am glad I was wrong, another great video! A tip I used for my large desk to allow cables without smashing, I got some rubber feet that have a hole in the middle for a screw, and put two of them along the back edge of the desk, and the took a stick on felt pad to put over it after screwed down. Keeps it away from the way a consistant amount (am I OCD lol) and less likely to mark up the wall from rubbing. Have you thought about doing a video on making your videos? I for one like watching those as I'm just getting back into video editing after 15 years since last doing it.

[@RagnBoneBrown]

Cheers. I've done a few videos like that already. kzbin.info/www/bejne/mYCre5R5l9KDabM kzbin.info/www/bejne/sIvFqmiJa6aWadk kzbin.info/www/bejne/hXPbdX6FftCsjc0

[@wilbearworks]

Great video Keith, The sound in this one is markedly better than most.

[@Hunders1984]

Now you're using matt paint I'd suggest perhaps giving the walls a coat of decorators varnish. It doesn't change the sheen of the paint too much at all but it really helps with minimising marks on the walls as they now would be wipe clean.

[@guyvine2166]

Love Zinnser bin. Cleaning brushes is fine with Methylated spirits. Just swirl around in a small jar of it, then take out. Will always be some left i the middle of the brush, but when dry is brushes out into a bit of dust afterwards and brush is typically good again. Also can thin BIN with the meth a little which can stop it drying quite so fast. Still fast, but a little more working time. Use BIN on knots all the time to seal before painting.

[@handsofblue39]

Hi Keith. I'm a professional decorator and use zinsser products a lot as they are superb. The best cleaning solution is the proprietary bin cleaner zinsser produce, but best (and cheapest) solution is just store the brush in the tin. My current zinsser bin brush is approximately 2 years old. Really enjoy your vids and if you have any decorating questions/issues don't hesitate to ask and I'll be happy to help. I also live in Norwich.

[@RagnBoneBrown]

Thank you

[@awantamta]

A great build and finished off beautifully by those handles. You should have done a separate video about you security system. That would have been interesting but do a video about sewing curtains. I am sure we will learn something.

[@c.a.g.1977]

Loved the old colour green, as well as the new one! Classy! ooh, and those brass handles are nice, too. And yes, a video on soundproofing your room would be interesting, Keith!

[@kevintodd6150]

Hi Keith, As previously mentioned by Sarah,you can clean your Zinsser brushes with meths, however if you get a suitable container that is airtight, put your brush in there with some meths, wash the brush in the meths,then leave it standing in the meths.I struggled to find a tall enough container, but eventually used a “ Vanish” fabric cleaner container. I managed to buy a short handled brush from Johnstones, which fits perfectly. This method means you can use decent brushes.If you check the brush every month or so, they will stay soft for months if not years 😀

[@pteddie6965]

Keith, the completed desk looks great in the room and the new green paint that you've chosen for the walls is indeed an upgrade. Thanks for sharing this build process with us.

[@bobx2387]

Hello Keith. For Zinnzer brush clean use Meths. In fact, if you have an airtight container that takes the length of brush, leave it in with a little meths so it is ready for use and just pat dry ahead of using, For cutting in get used to using a three inch brush (Purdy are good for this) and just angle the brush away from (say) skirting. You will soon find you get a cleaner edge. Those sash brushes give you a blobby cut in. Same goes for cut in to ceilings etc. Bob ( Somerset) "Where the cider apples grow.

[@RagnBoneBrown]

Thank you for the tips

[@AliDymock]

Love it Keith. The new green looks really nice with the birch desktop. 👍

[@RagnBoneBrown]

Cheers Ali

[@shawnbooms6176]

Yes both videos sound great. Curtains and soundproofing

[@Wydowson]

Hey Keith, your desk is beautiful. I've loved joining you on your journey from polishing up bits you found on the side of the road to this top quality bespoke desk. Keep up the good work :o)

[@JL-rx6hl]

Keith. I noticed in the clip when you were fitting the camera outside that you have a 6 or 10mm t&e via a catenary. t&e isnt really meant for out side use as uv degrades the palstic. you might consider covering it with a length of conduit but obviosly that will mean disconnecting one end

[@RagnBoneBrown]

I agree. I was very disappointed when I saw my electrician had used t&e 🤦🏻‍♂️ conduit is a good idea, will probably do that

[@jigsey.]

I remember commenting about the green... The new green is perfect...the desk is amazing

[@rjrj570]

I like the modularity of it . At first didn't like the stripe in the top but it looks good in place. cool wire organizer tray and clip too

[@MrBez007]

Great desk Keith. Handles look great

[@Cradley684]

Look's great Keith, you can get the wife to make the curtains LOL, Nice Telecaster too , You two Stay Safe now !!!.

[@shannonsell6006]

The desk, the handles, the wall paint, it's all stunning! What a makeover! Nice to see Dylan too, as usual. 😉 As far as another video on the office, yes please! Show us the journey to a dream space, INCLUDING your best shot at sewing! 😂

[@RagnBoneBrown]

Thank you

[@dougsaunders8109]

Clean the Zinsser bin brushes in meths as the first step then warm water and washing up liquid. A water based solution to powdery surface or somewhere that need stabilising is Zinsser Gardz. Brilliant stuff

[@fredsmith8897]

With that jumper you blend better with second green. 😜Thanks for the video, excellent content as always.

[@paulprescott7913]

That desk looks even better as a finished article and installed. Really like your office set up.

[@harveychuckles3780]

If you've only come here for Dylan skip to: 00:15 (you can't catch me out with time lapse that easily); 00:23 (awwww, watch this bit frame by frame, it's properly heart warming); 07:07; 10:35 (Dylan gets bored looking over Keith's shoulder); 11:23 (Dylan is still bored); 12:16 (Dylan on security camera - he's a cat burglar); 12:46 (back to bored Dylan); 12:59 (Dylan's reflection on the monitor. You can't catch me out like that either); 13:09 (Dylan wants to know how much longer you're going to be ignoring him); 13:34 (Dylan being bored from a different angle). Well that makes up for the occasions when Dylan doesn't appear. The office is looking good and I also like that you bin your bin brushes :D

[@RagnBoneBrown]

😄👍

[@markwatters6875]

Brilliant desk there mate. To good to use. All the best.

[@sureshot311]

This desk is beautiful. Those pulls are top notch. The wall even looks incredible from the touch up. Amazing work all around. Absolutely stunning.

[@DIYDuBItYourself]

Fantastic for workflow and editing all your future videos! Well done!!

[@adammono1839]

I always remember a jimmy diresta tip for paint brushes. He cut the handle short and left it in the tin. The next time he needed to use it he opened the tin, grabbed the brush with mole grips or pliers and painted with the mole grips as the handle

[@samanthasmith832]

Blink cameras are great and storage is on your own devices or network unlike the nest ones.

[@CharlieSkapentry]

Outstanding job mate! Really inspiring work

[@pitsnipe5559]

Wow, desk is awesome, office looks great, Blue Yeti microphone is awesome, cat is adorable. Guess that says it all. Seriously, love the desk and that hardware was well worth the wait and expense.

[@mrs.noodles]

The drawer pulls are gorgeous! The desk is okay, too! I love how Dylan matches the new wall colour. :D Nice work, Keith. Greetings from Montreal.

[@Paul-XCIV2]

I can recomend 2 or 3 TP-Link Deco wifi units in a 'mesh' setup. They will transform your wifi!

[@SeymourClearly2]

I have those as well, they’ve transformed our WiFi, used to be a guess whether devices would connect or not, now there’s never any issue.

[@niva8043]

The desk is beautiful and so is Dylan ❤

[@RagnBoneBrown]

Thank you

[@KellyEUTAH]

I am definitely wanting to see the office upgrades, and more kitty cameos. 🐈

[@sarahpoyntz9215]

Methylated spirits is the only thing to clean it, as a decorator I get the cheapest crap brushes and throw them after, or the cheapest sponge rollers. If you get any more issues try some zinsser peel stop, that'll do the trick for anything flakey or powdery. Would of thought bin should work though. Great work

[@nickwoodall4744]

Agree with Sarah, as you know Keith, shellac is the basis for French polish and so meths also used in French Polish is the solvent to clean that paint, which happens to be the dogs dangles in my opinion.

[@RagnBoneBrown]

Thank you!

[@leebancroft1013]

Keith I use those concrete screws a lot and found that using washer work great with them

[@davidwilliamson2115]

Jayes Fluid works very well to clean brushes

[@gryffindork9563]

Looks fantastic and the desk is unique, Cat inspected 100% approved ♥️

[@RagnBoneBrown]

Thank you!

[@eldoradocraftsman3733]

Very good. Love Both of the greens but understand why you changed. How about a nice old Chesterfield sofa? I nice dark leather would finish it off nicely and help muffle the sound. Love the cctv too so thanks for posting that. Hate the thought of paying a monthly subscription to protect my own house. 👍🏾👏🏾👏🏾

[@ptousig]

"...and then I sneezed..." Now, that's thorough narrating right there.

[@lynjermey6423]

I really like the new Colour. The office looks really great.

[@everybodylovesducksauce7158]

looks fantastic! Like you said nit picky.... would never bother me!!! 👍

[@EvanDunville]

Beautiful work on the desk and room. Those drawer pulls were definitely the right choice!

[@StamosTee]

Keith the desk came out fantastic!!! Enjoy your new workstation.

[@detroutspinners9933]

The desk looks great, love the dark sapele against the beech. Just a word of caution though, at 3:27 it looks like your metal dimmer switch isn't earthed

[@animationcreations42]

I installed Annke cameras at my Grandfather's house and they've been running for a few years now without a problem! I went with Ring cameras for mine as they were on sale, and I already had the doorbell and alarm, and have either Echo Shows or Fire TVs in every room, so I can watch from anywhere. I was already paying a monthly fee for the doorbell, so it wasn't much more for unlimited cameras

[@becool365]

Most binders don't resist heat well. You can clean most paint off using boiling water, as long as it is not hot enough to also melt nylon bristles.

[@ArtemisToo]

I can't the the only person who noticed that the new paint color matches both your shirt and Dylan's eyes... ;-)

[@elioth.g.w2976]

I used meths to clean my Purdy when my wife used the wrong primer and brush from the shed ! It did turn out ok in the end.

[@smallspacecreation5768]

The finished desk looks really good the brass handles finish it off

[@_Damian_.]

The desk and set up is looking mint mate!👌🏾...have you considered a mouse mat to cover the joins in the desk?

[@RagnBoneBrown]

Cheers! I'm not a fan of mouse mats to be honest

[@burtobm]

For once the Facebook algorithm worked. Watched a few of your clips and went hunting for your KZbin channel. Love the content and the high level of detail.

[@burtobm]

Oh and cracking desk

[@TigerCarpenter]

you could ask some woodworker to add that inner corner strip, to get it exactly the way you want :P [or else just get used to it like I got used to my piano X-stand getting in the way for my knees, just kidding :: I will make my own piano stand very soon, as I can't take that X-stand] I like to put the large cutting mat on my desk, so that my sweat is not damaging the wooden top (I live in tropics), and I can cut stuff right on my desk (opening packages and what not) the desk turned out remarkable, and that brass hardware is spot on too

[@hassanjudah9401]

"and then I sneezed", it felt like part of the work... 😅😅 Great job as always 👍

[@kokonokov]

This turned out amazing! Great job! Would love to see a separate videos on installing the cameras and the future office projects.

[@kasroa]

I would have LOVED a whole video on the camera installation, as I'm planning on installing my own cameras and I'm sure you'd have some good tips and advice.

[@nathalie5064]

Love the end result, it looks really nice. Really well done, and Dylan seems to approve the work as well ^^

[@MiriBON]

So cool :O A very clean setup!

[@mikedeman5351]

On your previous video, I commented that perhaps the desk was one of your best builds. In fact, having seen this video, I think it is the best thing you've made. Just my opinion. The office/studio looks great. Lovely work. Great to watch this :)

[@RagnBoneBrown]

Thank you

[@tonyworkswood]

The desks very striking Keith with the contrasting timbers, it's well laid out as well. It's looks ready all set for business with the three monitors powered up in place. Tony

[@RagnBoneBrown]

Thank you very much Tony

[@WeekendShedHead]

I can see that desk in gallery!! Wonderful Keith 👏👏 well done! Your designs, workworking skills and results are to be admired!💪

[@FearsomeWarrior]

I’ve used a corner desk, the same one, since 1995. My keyboard centered in the inner corner keeps my mouse on its mouse pad. Maybe just get a mouse pad that covers the gap. I’m using a very old, early 2000’s, aluminum sheet with a mouse friendly surface stuck on it made by Razer. Maybe you’ll fin a mousepad you fancy too.

[@EddyCarroll]

The desk looks great, Keith! Nice work and attention to detail. For any other current or potential Nest Camera users out there, be aware that Google’s latest Nest units are NOT compatible with the older ones, despite being sold under the same name. They use a different app (which isn’t as convenient to use), have no web interface for desktop access, and the image quality also appears poorer, though still quite good. I was dismayed to discover this when I picked up a new one to add to our three existing cameras last week.

[@RagnBoneBrown]

Cheers Eddy. You'd think Google would have made them backwards compatible 🤷‍♂️🤦🏻‍♂️

[@Byront83]

Was excited to watch this when it popped up on my notifications. Only to realise I’d already watched it early on Patreon 🤦🏼 So I’ll watch it again!

[@IEnjoyCreatingVideos]

Nice work Keith! Thanks for sharing the video with us! Happy New Year!💖👍😎JP

[@sisters1941]

Keith, it turned out lovely. Love those drawer handles too,

[@RagnBoneBrown]

Thank you

[@terristroh3965]

Incredible job! I love this desk! Those brass drawer handles really take it up a notch. For the short corner issue, I’m wondering if a piece of the accent wood (sapele?) could be added as an extension.

[@ColshyR1]

1- love the desk - my personal choice, id have went for a chrome or brushed steel finish on the handles 2- not my colour for walls lol dont like anything green 3- would recommend an XXL gaming mouse pad - i use one and it covers a good amount of my desktop 4- we got an Annke CCTV system installed earlier this year. would highly recommend them

[@benefitthirteen]

The new setup looks great. Nice work on the desk, I enjoyed watching the build.

[@biscuits671]

Beautiful mate

[@elchimpo9590]

Bless you !

[@BadAppleWoodwerx]

Dylan is the star of this one for sure. 😉😎 Looks great!

[@harindergill7221]

Good one, Enjoy it heaps!

[@ianvicedomini2648]

You've got a really nice set up there Keith and that camera system seems well worth having a look at. Great video mate 👍🏻👍🏻

[@mandyleeson1]

Desk is great and I think Dylan has confirmed this. Your office looks very professional now, personally not really interested in the sound reduction, but I'll watch anyway. Have a really good break.

[@RagnBoneBrown]

Thanks so much Mandy

[@thedoc1210]

like the three monitors. room looks fantastic

[@racinghome657]

Zinzer Bin, you've been spending far too much time in the pub with Charlie DIYwhite. Desk turned out a treat.

[@JohntheSchreiner]

Looks like a great setup, nice one!

[@RagnBoneBrown]

Cheers John

[@tim_biller]

Much better colour on the wall - all looks very spiffy.

[@RagnBoneBrown]

Thanks Tim

[@paultay23]

Nice one Keith, as greens go..that green is better. Office and desk looks great as do those handles. Cheers Paul

[@RagnBoneBrown]

Cheers Paul

[@PersonWithYouTubeAccount]

Great video. Beautiful desk. With the triangle joining piece where you sit. Could you curve (semi circle) out the side that is close against your body with a nice smooth jigsaw cut? Nothing too steep but could give you a couple more inches and feel a bit more spacious?

[@stevebosun7410]

Hi Keith, with a shellac based primer, it might be worth trying methylated spirits to clean your brushes.

[@zeroy]

For the mouse just get yourself a proper large mouse and keyboard mat, it will help protect the desk also if you spill something (you will :D )

[@tayred81]

Have you tried white spirit? Really like the "English green" on the wall man. You could make a 10 mil hole in the desk an cover it with a plastic cap meant for cables

[@theOneWhoTradez]

great drawer fronts mr english

[@eileenworth7862]

God bless you! 😄 (you sneezed)

[@woodyourather7835]

Great video as always. A nice wooden mouse pad could fix your (mouse over joints) problem. And possibly a modular wrist support to attach to the front of the angled section.

[@enderwiggin2856]

Love the vid sir. Always interesting to see what comes from your channel. An unsolicited thought regarding your sound deadening options if I may? What are your thoughts on "decorating" with tapestries instead of cloth? Finding ones that are intriguing and artistic would add some contrasting colors and visual interest and the pile from the tapestries would help to capture and quiet some of the sound. Anywho, looking forward to future vids. Cheers.

[@theneone111]

Looks really nice finished 👍

[@benjaqsonworkshop9974]

Great desk design and build. Your work has real style to it now Keith and those handles may not be reclaimed but worth every penny - even if paid for. I agree that sound proofing vid and one on making vids would be very interesting.

[@MrJono1999]

Cracking looking desk. You gave me a thought when mentioning the issues with the mouse and not quite enough desk space on the 45 degree angle part, why not make that entire angle section out of one large piece of wood? Then there would be no seem for your mouse to struggle with. Anyway great build, really love the double drop leaf file store (I feel an upgrade to my old office desk coming on). Another superb video, the Annke cameras look good too, keep up the good work.

[@Driftkart]

I have string going through the paintbrush end. & close the lid of the can holding the brush wet inside.

[@thewinenut9800]

Great making and a great setup Keith. I suggest getting a full sized wireless keyboard as well, improved ergonomics and you find video editing easier, at least I do.

[@BischBaschBosch]

Very nice mate. If I had a set up like that I'd be more enthused to work on videos I think, something I'm struggling to be at the mo. A desk is on the cards though even if enthusiasm for making vids is in short supply ;). Those handles are legit. Finish the drawers perfectly.

[@colindoesdiy]

Hi Keith, love the finished Desk and must give you a lot of satisfaction sitting at such a nice desk knowing you built it all yourself. I wondered if you've ever thought of doing a video about making your video's?, it's certainly something I would be interested in especially the type of equipment you use and the editing software etc. etc. Have a great weekend and look forward to seeing your next project build.

[@RagnBoneBrown]

Cheers. I've done a few videos like that already. kzbin.info/www/bejne/mYCre5R5l9KDabM kzbin.info/www/bejne/sIvFqmiJa6aWadk kzbin.info/www/bejne/hXPbdX6FftCsjc0

[@colindoesdiy]

@@RagnBoneBrown Hi Keith, thanks for the links, I've now watched all three and I now understand why I've never considered getting into KZbin creation before when I was working full time, travelling up and down the country for work, having three children and now four grandchildren as well. Now I'm retired, its something I've been considering for a little while and had a dabble on Instagram and Facebook but as yet not ventured on to KZbin, I'm not really interested in making money from it but really enjoy the process of making things and DIY in general but it would be really nice to share my experiences with other people. Thanks again for taking the time to reply, having watched these videos I now understand how difficult it must be to keep up with comments and questions. Having retired I thought I would have countless hours of spare time but I'm still finding that there still isn't enough hours in the day. Keep up the great work, but take it from me, Family is the most important thing in your life, so always make time for them over and above everything else, sometimes over the last fourty years I may have forgotten that for a while but find it even more important now I have grandchildren, take care and thanks again.

[@OhHeyTrevorFlowers]

Neat work!