I've bought and installed two of these. Both times I used this video. Great how to video. Thanks man!
@failingdisciple9385 жыл бұрын
Installed this kit on my 2006 Dodge Ram Megacab w 5.9 Cummins. Great kit. Took me bout two hours. My Megacab configuration allowed plenty of room to run the lines. Cutting the fuel line was the biggest worry but wasn’t as big a deal as I thought. Pay attention to installing the new threaded fittings on the newly cut fuel line. It’s hand tight THEN 2 1/2 turns after that (check me on that). Follow the directions lol! Didn’t do it the first time and leaked when I started the engine. Did it and stopped leaking. I was probably in a hurry. Been running it a year now and no problems. Don’t know if it’s really working but it makes me feel good…and that’s all that matters lol!
@ernestoluzan3 жыл бұрын
Can you lend any feedback on the “galling” from using dissimilar metals between the filter nipple and the filter themselves?
@em0p0ny Жыл бұрын
Did you need to get new compression fittings?
@anthonymillsap28808 жыл бұрын
I put on on my 08 cummins mega can went right in East as pie instructions are very simple.
@peterdehaan56346 жыл бұрын
The video skips the installation of filters onto the filter bases. The Baldwin filter bases are a weak link in the system because of their aluminum thread nipple that threads into the filter. Using anti seize compound to prevent galling at this point is a bad idea. Interesting that this step is not shown.....
@Tinkerer4Life-pp2dg9 ай бұрын
Nice work! Not as bad as I thought it was. Did it take take the 45 minutes it said in the instructions?
@ericjulian561016 күн бұрын
Thanks for making the video
@hogie16858 жыл бұрын
So your happy with this set up? Would u recommend. Is your truck all stock???
@AdaptationActual5 жыл бұрын
Did the fuel line in your truck have a coating on it? If so how did you get it off to make the compressions fittings work properly?
@Zombunist4 жыл бұрын
How has the water separator performed for you? Have you been able to see water in what you have drained from it? I read that the BF1212 is designed to be on the suction side of the pump, not pressure side as this installation is. I have a 3rd gen 5.9 I am researching options for. I am curious if the Baldwin works correctly in this application.
@brentmcmahon81882 жыл бұрын
I put a little pipe dope and not Teflon if you put too much Teflon tape you can crack a fitting.
@cd11687 жыл бұрын
very good video... your truck is very clean underneath ... how often do you chenge the cat and baldwin filters?
@copy80744 жыл бұрын
With the Baldwin filter did you install that little o-ring that comes with the filter or just the big one that’s already on the filter?
@hogie16858 жыл бұрын
U must have the long box. What year is your truck?
@MrTdw19548 жыл бұрын
Very nice how-to video. Thank you.
@genehensley7678 жыл бұрын
yeah tap on the lid so you can lose a few drops of diesel fuel and get a bunch of dirt down in there
@floridacracker42796 жыл бұрын
What size are the seat bolts? not talking wrench sizes...
@jimdailey10187 жыл бұрын
This is a great kit.
@509er69 жыл бұрын
I want to do this but wonder if it's overkill cause I already did the cat fuel filter on the stock fuel filter location....
@TheTunerdude9 жыл бұрын
+Zack Montgomery injectors are expensive. keeping fuel clean and water free cheap....
@danielhudson57197 жыл бұрын
Zack Montgomery hey Zach. This is Daniel Hudson. Did you ever get a straight answer to your question?
@dimedriver7 жыл бұрын
The CAT filter needs a water separator before it and should have a pre filter. Keep the small birds and large pebbels out of it.
@renorytting8 жыл бұрын
Whar did you use to cut the fuel line, saw what looked like a small red line cutter?
@renorytting8 жыл бұрын
+Ross Rytting Never mind, saw the line cutter at the begining of the video in the parts bag.
@robertd69253 жыл бұрын
Who makes the kit?
@adamropp88325 жыл бұрын
Love Turnerdude videos! Will this system lower the fuel pressure significantly?
@brentmcmahon81882 жыл бұрын
No does not lower pressure if you have a gauge the pressure goes when dirty .
@brentmcmahon81882 жыл бұрын
Up
@brentmcmahon81882 жыл бұрын
I’ve had this system for a lot of years but I put a 5 micron Balwin in the factory housing that way water in fuel light still works. And I run it for 2 years before I change and I don’t driver very many a miles a year. My wife drove 1200 miles last year and I drove about 2600 miles so not many and couple times a year I have never had water in thoes 2 water separators. The best thing you can do for high pressure pump and injectors. Hope this helps a great system.
@Oosik918 жыл бұрын
Cat filters are made by Baldwin
@johndevinaspre6768 жыл бұрын
they are but they are made at cats quality standards not Baldwin's
@TonyBerten7 жыл бұрын
johndevinaspre676 actually I think that all cat filters are made by Donaldson
@brettheath31826 жыл бұрын
Cat fluid filters are made by Baldwin in usa. Both as good quality. Cat have a bowl to see water and baldwin just a drain screw. Donaldson are not related but equally as good. If aftermarket are making genuin, makes them trustworthy in my books
@ron__dawg9 жыл бұрын
did you leave the factory fuel filter on the truck? if so is it overkill for the for the factory fuel pump? I wanna know cause im having trouble with the air dog 100 system.
@rrcoster6 жыл бұрын
from sounds it does leave the factory fuel filter still in but i wonder if you could bypass it now
@truckcampertraveler73695 жыл бұрын
No they work great
@bovellois8 жыл бұрын
Does it remove/filter tiny air bubbles? From what I understand, bubbles damage injectors in the long run.
@QuickStyleMotorsports3 жыл бұрын
we have ran on for 3+ years on a 6.7cummins and zero issues, also did the factory fuel filter delete
@brentmcmahon81882 жыл бұрын
Needs a very small amount pipe dope on threads keep away from tip!
@victorbarron56204 жыл бұрын
Where I can get tus at?
@CodyJv6 жыл бұрын
just sharing but you can upgrade the stock one if you don't justify doing this upgrade. info below. thanks for the upload. Baldwin PF7977 5 Micron Fuel Filter
@waynemega12636 жыл бұрын
According to my knowledge the factory drop in fuel filters are recommended to be replaced every 7500 to 10,000 miles
@brentmcmahon81882 жыл бұрын
Leave the first filter a hair lose and bump the starter to tur lift pump on the tighten it up and do the same with cat filter and you can do same to factory filter and that will get rid of air in filters. I don’t do this I just bump starter 2-3 times and that seams to work fine starts reel quick.
@andrewinlagrande8 жыл бұрын
Where did you order this kit?
@Ben-et8wh8 жыл бұрын
lol are you serious? he said it about 5 times while opening the box, even has a sticker on it with the company
@andrewinlagrande8 жыл бұрын
haha yeah i heard that after I actually took the time to watch the rest of the video lol.
@bluedodge997 жыл бұрын
what about adding more air in fuel from rhe extra filters ? been told thats not good
@anthonydaniels77129 жыл бұрын
how's it working considering the injector problems sorry I'm new into the diesels currently looking at a 03 and 04 5.9 3500 dually heard about it don't quite understand it
@TheTunerdude9 жыл бұрын
+Anthony Daniels I got 1500 miles on it now. I can say I notice a huge difference in the way the truck idles and it seems very happy ... You can never have too clean fuel.... Any one else want to chime in on fuel filtration???
@TheTunerdude9 жыл бұрын
+Anthony Daniels working great. watch the fuel pump on the 03 and 04 its not in the tank.
@leel64296 жыл бұрын
I have 280k on my truck 2005 5.9 I have never upgraded anything but the air intake. Changed fuel filters every 50k. Not one major problem
@letsgo2435 жыл бұрын
TheTunerdude I have an 03 and want to add this kit, what do you mean by watch the fuel pump it’s not in the tank?
@seanroberts23943 жыл бұрын
@@letsgo243 my 03 has the lift pump on the fuel filter housing. I'm not sure if that pump will pull through these filters.
@maxcarson55566 жыл бұрын
3/4” = 19mm
@rjt17895 жыл бұрын
How did you cut the line?
@rjt17895 жыл бұрын
Also did you just thread that fitting onto the fuel line?
@TheTunerdude5 жыл бұрын
just used a hardware store pipe cutter. release the fuel pressure before cutting or you will wear diesel fuel
@Chief60678 жыл бұрын
Will this system work on a 2000 Dodge 2500 5.9? The website doesn't show the 2000 model year as an option for this system Help
@davekana83886 жыл бұрын
Chief60 wanted to know the same, did you find out? Dave
@artemteterin23935 жыл бұрын
It looks like his truck is 2nd gen body style. I'm trying to find out more about this system so i can install it myself.
@tanktyrants80654 жыл бұрын
@@artemteterin2393 Any luck? I have an 2001 24v. My Airdog went to shit.
@christopherboerstra74958 жыл бұрын
Why not install a Fass?
@jbaker49005 жыл бұрын
Price is the simple answer. This kit and a belt driven, mechanical lift is still cheaper than Fass or Airdog.
@jasonscales34764 жыл бұрын
@@jbaker4900 where can i get the mechanical lift pump 2 of my friends have air dog and both are on the 2 an 3rd motors in 4 years
@jbaker49004 жыл бұрын
@@jasonscales3476 Google " GDP " mechanical lift pump
@The-real-CrackerZack7 жыл бұрын
How much?
@bullrambler8 жыл бұрын
How often do you change the filters...?
@rrcoster6 жыл бұрын
every 15k miles says
@williamrenfroe5465 жыл бұрын
nope cant read the card
@michaelhudgens9917 жыл бұрын
Don't get it. Destroyed my truck. Something is wrong with thread pitch on the cat filter to adapter.
@westerndiesel29487 жыл бұрын
The aluminum on aluminum thread causes galling. This kit uses anti-sieze (an abrasive) on the clean side of a fuel system. Stainless steel version (no galling): a.co/0UUgGAe
@naten12766 жыл бұрын
What do you mean "destroyed"? Has a solution been found or should I buy a different one ?
@letsgo2435 жыл бұрын
Western Diesel what is the clean side of the system?