Ram 45 micromotor repair part 2

[@suztino]

Thank you for your helpful video Ed! I have a RAM nail file hand piece that I'd gotten a bit stuck in a while back. Your hand piece is a little bit different than mine, but following your instructions helped me to get mine apart and more importantly, back together again with all parts in the right order! I appreciate your detailed instructions, it was like having my dad here with me showing me how to do it! 😊 Many thanks!!

[@EdPitts1933]

Thanks Suzie. Most of the time its not too difficult if you know the little tricks.

[@charliearnold6049]

Great help! Used a homemade 1/16" bent skew to remove the small c-clip.

[@benjamindruart9107]

Merci beaucoup beaucoup grâce à vous j'ai réparer ma ponceuse encore un énorme merci

[@Talisgold]

Thank you so much very much for such a wonderful demonstration.

[@vetta4344]

Thank you! I was able to fix my carver without sending it back for repairs.

[@SJ-kf5ts]

finally I found that I need !!! thank you very much!

[@glynnwatts]

Thanks Ed for posting this. These handpieces are going down all the time. I am going to order the parts and look up the layout on Google. Thanks again. Glynn

[@grishabodrov8243]

Amazing video! You saved me twice !!! Great job 👌

[@igneousmoon]

I found your video because when I put mine back together it didn't lock. Now I know what part I have lost. Curse this adhd brain 🧠

[@lenhowl]

Well done sir, thanks for posting.

[@Chefmasterkaga]

Thank you so much for this video,sir.

[@stevoincv]

Can you let me know where you ordered the schematic for the ram handpiece and where to order the parts and can you change the bearing without special tools. Thanks in advance for your response.

[@EdPitts1933]

Glenn, the link for the diagram. is in the description,

[@DeepakKumar-sx1lu]

really good

[@May-i2j]

Thank you so much.. I got repair it 😶‍🌫️

[@somnathssight9556]

What is the name of this micromotor & what is it's price

[@kimberstephenson5903]

My hand piece is so stuck it won't come apart. Any suggestions?

[@MrJofamoya]

I can not enter the burs in the piece does not open

[@stevedonaldson3027]

did'nt help me... I wanted to see how to remove the bearings at the collett end of the handpiece

[@kimthang3180]

My handpiece a little bit different but I did put everything together like you do when I turn on , have no noise, not working at all,please tell me why

[@EdPitts1933]

kim thang there's so many possible things, I can't tell what's wrong. it is a power problem but all I can do is suggest. are the brushes installed correctly? plugged into control box? switch on? speed control turned up? basically, you have power traveling in two wires from control box. this must go through the brushes to the armature and that causes it to turn. all I can say fo sure is the brushes are not applying power to the armature. sorry I cant be more help

[@Stufipawi]

very good :) thanks

[@JamesEPitts]

Steve part 1 shows how to take it apart

[@diencongnghiep8638]

whereDo you buy bearings not

[@AFishTale]

The owners manual has a parts list with a diagram of the handpiece: drive.google.com/viewerng/viewer?url=www.ramprodinc.com/skins/skin_4/manuals/RAMPOWER%2520INSTRUCTION%2520MANUAL%25201.pdf

[@EdPitts1933]

Do a Google for rotary handpiece I don't remember where I found it. No special tools needed just a tiny Phillips screw driver. Magnetic is best. Ram Products 1-877-726-7763 for parts they may be able to supply a diagram. Be sure to lay the parts out in the order of dis-assembly so you can put it back together.

[@mike5556]

Thanks! Your video helped save me $145

[@JamesEPitts]

that's great. that was why I made it. I bought all new bearings but while making the video I found that a drop of gun oil saved my bearings. the new ones are still in the bag. Ram said not to oil them?

[@mike5556]

***** My 830ZZ was in pieces! I had to change it and your video was a big help. Thanks again.