This works perfectly guys!! I bought adapters & oem projector headlights for my 2014 ram lonestar.. No problems w/ it thus far & easy assembly.. Great product! Thank you RetroShopLights
@texasking878 жыл бұрын
so everything works good, I have a lonestar and want to go to the projection. but the dealer said it wasn't possible. also have you done anything with the tail lights?
@RetroShopLights8 жыл бұрын
dealer doesn't know about us ;) We've sold a LOT of these - and yes, we have adapters for the tails too, as well as the full tail light kit (OEM tails included) on our website - www.retroshop.us
@xlRex2548 жыл бұрын
texasking87 yes it works bud easy plug & play
@rey211987 жыл бұрын
daniel gonzalez where did you buy the projector headlights? I want to get them for my 2016 ram 1500
@bballajb857 жыл бұрын
Yeah I'm looking for a pair on my 1500 Bighorn
@josher14xx216 жыл бұрын
Thank you finally my question is answered!
@nunyabizness75797 жыл бұрын
Just got my lights yesterday and I’m doing the install just in time for Christmas :) Wish me luck
@Mr.Worf637 жыл бұрын
Nice that you mention the 🇨🇦 DRL's . I don't own a Ram but I do find it interesting to see what you can do to upgrade your truck . I would say go to a junkyard to get the projector headlights . I own a car .
@mcruzcontrol16 жыл бұрын
I have 2014 Ram 1500. I bought LED 9012 bulbs, because I was told that’s what was the upgrade. Bulbs are too long. Plastic back cover does not close. Are these the correct size? Do I need 2 sets for low & high beams? Yes, they are projectors.
@conohdo6 жыл бұрын
i just brought this Adapters! i hope they will make me happy!
@BiGoOcH2 жыл бұрын
Great video . Where can I buy these adapters . I click on the link but it's dead. Please lmk asap . Thanks
@RetroShopLights2 жыл бұрын
TY! We have those here - retroshop.us/collections/wiring-adapter-harnesses/products/4th-gen-projector-adapter-v3-1-pair (new website, this is a very old video) Let me know if you have any questions.
@Dortega1178 жыл бұрын
I was wondering if you can make a video installing these projectors on a truck that came with factory quads I just ordered a pair of the 13+ projector with the PNP connectors
@RetroShopLights8 жыл бұрын
We don't have a video of installing them on the truck. Not much really to it.....remove old lights, plug these in, mount and ground the resistor(s), and done!
@beastrod002 жыл бұрын
I have the leds on turn singles not working some work some don’t how do I fix that
@RetroShopLights2 жыл бұрын
The entire LED board has to be replaced. This can be done with switchbacks (white parking / amber turns), or sometimes with OEM boards (if we have any in stock......which is rare!)
@riescdz8 жыл бұрын
so? this is all i need to install 13projector on my 2012?
@RetroShopLights8 жыл бұрын
Yes.
@arielirianto83486 жыл бұрын
Are you able to run hid or LED bulb in the projector with these harness??
@cp120x3 жыл бұрын
What if I use AlfaOBD and put in BCM all typical factory code ? Would it show amber DRL ? I'm from Canada and would like to match OEM look as much as possible.
@RetroShopLights3 жыл бұрын
this is quite an old video......our newest 3.1 version of the adapters have a wire that runs to the fuse box to enable DRL. AlfaOBD won't be needed in that case.
@cp120x3 жыл бұрын
@@RetroShopLights Thank you for the fast reply. I'll go for your new gen of product then ! Thx :)
@mickwest90234 жыл бұрын
I need this for a Ram 5500 2011 Will the wiring kit work on this truck. And the lights?
@RetroShopLights4 жыл бұрын
Yup! We can have our latest version of the adapters at www.retroshop.us (in the adapter section) - and we have headlights on the website as well.
@colelazear46415 жыл бұрын
Where can I get a harness to convert from factory projectors to the quad style?Im looking at new headlights and they won’t fit trucks with factory projector lights so I need a harness to go basically backwards.
@RetroShopLights5 жыл бұрын
there is no harness to go backwards.
@viper306m3 жыл бұрын
My parking lights flicker only when the truck is on and the turn signals act weird any advice?
@RetroShopLights3 жыл бұрын
depends on the adapter, but in our v3.1 adapter, those issues are no longer present.
@viper306m3 жыл бұрын
@@RetroShopLights will your adapters work with the depo projectors?
@RetroShopLights3 жыл бұрын
@@viper306m yes, our v3.1 will. This video is very very old (v1 product) - but v3.1 can be found on our website.
@viper306m3 жыл бұрын
@@RetroShopLights will order thanks
@TwinDaddy7 жыл бұрын
where do you typically mount the resistor that gets hot?
@hmglor7 жыл бұрын
I need that big black plug. where would i find it because the one on my factory harness tab broke...
@RetroShopLights7 жыл бұрын
If its just the tab, shouldn't be an issue. these are a very tight fitting plug......
@ASobhi-uc3ih6 жыл бұрын
Is the Canadian problem with high beam circuit that you mentioned fixed with the new generation of the plug you now sell in 2018?
@RetroShopLights6 жыл бұрын
Nope, that would require quite a bit more wiring, and not be a plug n play option.
@ASobhi-uc3ih6 жыл бұрын
Thanks for your reply - I see - do you have any hints or more details in that regard? i.e. what additional steps are necessary, Where I can find the parts (from yourself or sister shops), what have you....
@RetroShopLights6 жыл бұрын
Its not something we have put together, but essentially you'd need to disable the DRLs on the truck, use a 5pin relay system to provide power to the DRL wire on the adapter, then shut off power whenever the parking lights or turn signals are on. Great......fun - but again, not something we've really dived into at this time.
@ASobhi-uc3ih6 жыл бұрын
thanks for the info - makes sense - can you also confirm if we don't do the above hacks and leave things as per your video, would the turn signals and everything work and the only thing that will be noticeable would be that high beams will be acting as daytime running lights instead of the amber strip (as you mentioned) -- basically want to confirm that signals will still light up the ambers and not leave them orphaned?
@ulicsc.51036 жыл бұрын
For Canada. What if I retrofit d2s bi xenon and eliminate the hi beam on the reflector. Can I have the DRLs working normally now?
@RetroShopLights6 жыл бұрын
no.....doesn't work that way. We are working on something for our Canadian friends - will update as soon as we have info.
@Michael_Wild5 жыл бұрын
@@RetroShopLights Any update for your Canadian friends?
@RetroShopLights5 жыл бұрын
@@Michael_Wild we do have ways of making this work with Canadian trucks. The factory DRL has to be turned off though, and another wiring harness has to be added in.
@snowvs11125 жыл бұрын
Do you have plug that are reverse? A male oem 14pin and female quad plugs? I have a 2017 RAM R/T and it has a projector plug. I’m trying to put alpha owl headlights.
@RetroShopLights5 жыл бұрын
Sorry, we do not make an "inverse" adapter.
@guillermoortiz14927 жыл бұрын
you mention no DRL amber lile stock for candian ram owners when purchasing this route. how about for US , if i buy these for a 2016 with the adapters with the amber DRL come on as if theu were in the stock versions?
@RetroShopLights7 жыл бұрын
If your truck is programmed for "turn signal" DRL, then yes. If its programmed for any other bulb, it will follow to that bulb. The adapter is simply a wiring pass through.
@tysurowski8176 жыл бұрын
RetroShopLights is it possible to reprogram the truck to “turn signal” DRL from “high beam”?
@Rigo.252 жыл бұрын
Where can I get that headlight(the one on the right)
@RetroShopLights2 жыл бұрын
we have them at www.retroshop.us under Ram / 4th Gen
@tamasprincz12908 жыл бұрын
next question I ordered a 13+ kit from you and I am from Canada... question is can I use just the cable w/o resistors and reprogram at the dealership? thanks in advance
@tysurowski8176 жыл бұрын
Tamas Princz were you able to reprogram your drl to the signals?
@sammyj1847 жыл бұрын
2009 fam with dual lights to projectors.. which harness? And how much
what would you need if you wanted to throw some HIDs on to this set up?
@RetroShopLights6 жыл бұрын
We have HID kits for these as well. All depends on the year of your truck, and.....the bulb type it takes (as there are 3 different types depending on the projectors you have). Best bet, email me with what year you have and the lights you have and we'll get you squared away!
@stevenmalvasio56398 жыл бұрын
I know I can't put hids in the standard light can I put hids in the projector light. without a light beam going everywhere.
@RetroShopLights8 жыл бұрын
Yes, the projector lights do quite well with HIDs!
@stevenmalvasio56398 жыл бұрын
RetroShopLights great I'll order a pair tomorrow doing research on tyc or factor headlights should be done by tonight
@RetroShopLights8 жыл бұрын
Sounds great!
@burbs96077 жыл бұрын
I have a 16 big horn 1500. I just aquired a brand new set of the all black sport light housings built in 2015 with the black shroud which I believe are discontinued. I think on the back it says h1 and 9005 for the headlights in the sport housings. Is this kit compatible with my set up? Also do I need anything besides these adapters like those resistors?
@RetroShopLights7 жыл бұрын
H1? Maybe.....9012 or 9005/9005.......If they are the OEM or TYC lights, I know these adapters will work.
@91ryangentile8 жыл бұрын
how do i run the switch backs in the 2011 all i can get is the switch backs to power on and flash white not amber
@RetroShopLights8 жыл бұрын
Ryan, please email us for troubleshooting with products we've sold you. TY! (email address is in the info above)
@yellowcat18647 жыл бұрын
do you have a kit to convert the rear tail lights to LED's
@RetroShopLights7 жыл бұрын
yes, we have these on our website - www.retroshop.us - thanks!
@kevinpeoples77056 жыл бұрын
Hi I have a 2016 ram express quad cab will these work for my truck??
@RetroShopLights6 жыл бұрын
Yup. Any 4th Gen Ram.
@xGR1MxREAPERx7 жыл бұрын
Ive noticed on your site that you have a V2 kit and it looks like you dont need any resister boxes anymore? is it an inline resister style now? that wopuld be awesome to not have to have 2 blue resistor boxes to mount on each side.
@RetroShopLights7 жыл бұрын
Yes! Quick note though, 13-14 is currently still using a resistor, but we are working on an update to those years as well - if that is what you have.
@xGR1MxREAPERx7 жыл бұрын
RetroShopLights awesome.. mine is a 2018 ram 2500 bighorn. Love the look of the the new projectors in black, mine are black but crappy ones haha.. if you upgrade to true fx-4 projector does that make you have a hid white light and brighter output? So I wouldn’t need hide with those?
@RetroShopLights7 жыл бұрын
The FXR projectors must be used in conjunction with HIDs. And they will give you awesome output!
@xGR1MxREAPERx7 жыл бұрын
RetroShopLights oh ok, that sucks.. I’m Not spending 1500+ on headlights. Thanks
@Dezmond_Roman7 жыл бұрын
The real question is what does my 2016 RAM have 2012 lights
@ryannelson23924 жыл бұрын
by 2012 lights you mean the quad style right? all trucks from 13 and up have the quad headlights unless they are the higher up trims. if i remember correctly, the R/Ts / sports, laramie longhorn and limited come from the factory with the projectors. the projectors come with the higher trim trucks, while the lower trims get the quad headlights
@loganrexroat30633 жыл бұрын
I have a 16' bighorn with the quad style!?!
@JeffryK137 жыл бұрын
Looking to install the projector headlights on my 2017 2500 that came with quad halogen reflector lights. I know I need these adapters and resistors. If I go this route, can I change the low beam bulb to LED? If so what would I need to do so? If not, but want a better bulb than halogen, what would you suggest?
@RetroShopLights7 жыл бұрын
Correct, though our new adapters don't have resistors (not needed). As for the low beams, HIDs would be best. We have those on the site as well, found here - shop.retroshop.us/ProductDetails.asp?ProductCode=4G%2E15%2EHIDs
@JeffryK137 жыл бұрын
So, I would need the 9005 bulbs for low and high if I did HID conversion for high as well? Thanks!
@RetroShopLights7 жыл бұрын
Correct. On the 16+ they are 9005 on both, 2 kits are needed if you want both low and highs.
@phillyrepo89277 жыл бұрын
So I just bought these adapters from you guys, except mine looks different. The resistors are in line and no ground. The conversion worked, the headlights function ok, but the adaptor that connects to the headlight plug on the truck side will not click and lock into place. Is this a common issue? Any suggestions? Thanks
@RetroShopLights7 жыл бұрын
Philly, we had an update on these - just haven't had a chance to update the video. Resistors are different now. Ends are not.....so shouldn't be posing an issue there. Shoot me an email and we can review. jeremy@retroshop.us. TY!
@miguelguerrero94267 жыл бұрын
Will I still need a adapter if I'm doing the same thing but from a 2015 to 2015 head lights?
@RetroShopLights7 жыл бұрын
If you are going from quads to projectors......yes.
@Jones5728 жыл бұрын
Where can we get those new look headlights?
@RetroShopLights7 жыл бұрын
hi, please check our website - www.retroshop.us for current pricing. TY!
@bigt3z23 жыл бұрын
Does it work for a 2011 Dodge Ram?
@RetroShopLights3 жыл бұрын
yup! your 11 is a 4th Gen, they'll work!
@AndreychukAndrey8 жыл бұрын
To aim the headlights is the screw same like on the old light?
@RetroShopLights8 жыл бұрын
Yes!
@AndreychukAndrey8 жыл бұрын
RetroShopLights Oh wow thank you for the fast reply. I have the headlight on the left and if I put the projector headlight and I'll be able to aim them through the hole in the fender?
@RetroShopLights8 жыл бұрын
yes, depending on the year though. Some pre 13s don't have the hole in the fender, it may need to be drilled.
@changchung7 жыл бұрын
Need some help please... I need a projector lamps set for my ram 2017... Where can I bought it??? Cheap will be great... 😁😁😁
@RetroShopLights7 жыл бұрын
we have replica and OEM on our website - www.retroshop.us
@armchairgangstac9076 жыл бұрын
Go on amazon search TYC projectors
@MrPaveles7 жыл бұрын
Just received the harness for 2017 but they came with one resistor per side, is it gonna work or I received the wrong part?
@RetroShopLights7 жыл бұрын
this video is old.......the product has been updated to have the resistors integrated to a circuit board - and will work on all 4th Gens.
@un_average_gang8 жыл бұрын
Jeremy can you tell me if these can work in the reverse order? Meaning going from a projector style to a standard quad headlight? Or is this specific to just get projector style in the quad style headlight truck. If that makes sense thanks?!
@RetroShopLights8 жыл бұрын
No....there are no "inverse" adapters for the truck.
@un_average_gang8 жыл бұрын
ok thank you for the reply!
@minecraftlover22226 жыл бұрын
1ofakind Why would you want to switch to Quads? Or duals? Over projectors? Any reason?
@Supasabe8 жыл бұрын
Going from quads to projectors do I need new headlight bulbs?
@RetroShopLights8 жыл бұрын
Typically the new lights come with bulbs.....but - if you are wondering about swapping over your HIDs or something? Yes..... quads are H11, the projector lights are 9012 (13-15) or 9005 (16+ version)
@Supasabe8 жыл бұрын
RetroShopLights okay so the ones from my quads won't carry over? I just had stock but i don't know if the new ones I ordered will come with bulbs.
@Supasabe8 жыл бұрын
RetroShopLights so 9012 is the kind of bulb I need to order?
@RetroShopLights8 жыл бұрын
H11 will not fit the projectors......but most lights should come with bulbs. If not - halogen bulbs can be purchased at your local parts store, HIDs we have on our site as well.
@Supasabe8 жыл бұрын
RetroShopLights okay thank you! On the new lights are the high/low the same bulb? Thank you for your time and I'm excited to get my kit in!
@baloo2177 жыл бұрын
hi, i need the adapters and resistors, how much are they?
@RetroShopLights7 жыл бұрын
hi, please check our website - www.retroshop.us for current pricing. TY!
@mdom94606 жыл бұрын
Can u use a HID kit with this?
@RetroShopLights6 жыл бұрын
of course! we have HIDs for these lights at www.retroshop.us as well
@lycanr15866 жыл бұрын
So this will work for my 2010 dodge ram
@RetroShopLights6 жыл бұрын
yes, any 4th Gen Ram.
@carlos542368 жыл бұрын
i have a 2016 lonestar. will it work?
@RetroShopLights8 жыл бұрын
Yes
@DonaldskyQC6 жыл бұрын
doo you deliver to canada
@RetroShopLights6 жыл бұрын
Yes, we ship everywhere
@samsameer48488 жыл бұрын
What is ur website name plz
@RetroShopLights8 жыл бұрын
Website - 💻 www.retroshop.us
@tamasprincz12908 жыл бұрын
very hot means can give you problems?
@RetroShopLights8 жыл бұрын
no...resistors are designed to mimic the stock bulb - and when properly mounted to metal - no issues.