The COMPLETE removal of Dodge Charger Exhaust Manifolds.

In depth tutorial on how to remove stock exhaust manifolds on a 2019 Dodge Charger Scat Pack 6.4L with Chester County Transmissions. Steve & Pete provide tips during the removal. The Corsa Performance Long Tube Header installation video is coming next!
Related Dodge Charger Videos:
1. Stock Exhaust Manifold Removal: • The COMPLETE removal o...
2. Corsa Long-Tube Header Install: • DETAILED Installation ...
3. Corsa Extreme Cat Back System Install: • INSTALL & COMPREHENSIV...
Get your subscriber Corsa Performance discount information here: allbeastprojec...
Products, parts discussed or installed:
1. Corsa Long Tube Headers/Collector Pipes: tinyurl.com/y7...
2. Corsa Long Tube Headers (Only): tinyurl.com/yb...
Special thanks to Andy & Pete of Chester County Transmissions. Visit CCT online, www.chestercou... or call 610-384- 2879.
HELP SUPPORT THE CHANNEL (READ BELOW):
Visit my website, allbeastproject... for our official merch, partners, special subscriber discounts & more!
Purchase AMSOIL products from BEAST Synthetics. Visit my AMSOIL Dealer website: beastsynthetics... (My AMSOIL Dealer #5746939)
*SAVE $$$ Become an AMSOIL Preferred Customer: www.amsoil.com...
*MAKE $$$ Become an AMSOIL Dealer: www.amsoil.com...
Need anything on Amazon? Please use my affiliate link: amzn.to/2zt5hcf
Send us stuff (if you like) & we’ll feature it in a future video.
BEAST Projects (Steve or Heddy)
PO Box 41
Wagontown, PA 19376
STAY CONNECTED! Follow us on:
Instagram: / beastprojects
Facebook: / allbeastprojects
Twitter: / beastprojects
THANK YOU FOR YOUR SUPPORT!
My favorite tools, shop accessories & vlogging gear (Affiliate Links):
1. GRYPMAT Flexible Non-Slip Tool Mats: bit.ly/34jQHlm
2. GoPro Hero 8 amzn.to/30EvXVs
3. DJI Mavic Pro Fly More Package amzn.to/2BUSBtt
4. Canon M50 Camera amzn.to/2BZqv4Q
5. Rode VideoMic: amzn.to/2pdBLo8
6. Rode VideoMicro: amzn.to/2M2jB1K
⚠ DISCLAIMER: BEAST Projects tutorial, instruction & how-to videos are intended solely for entertainment and/or informational purposes & for use by persons having appropriate technical skill, at their own discretion. BEAST Projects is not responsible or liable for any loss or damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information in this video. This video description contains affiliate links.

[@7souls458]

Helped out a whole bunch thanks a lot for this video.

[@BEASTProjects]

Glad it helped! Thanks for watching.

[@Mitchyymitchmobile]

I step by stepped this, and now I completed a header swap with JBAs thanks a bunch

[@BEASTProjects]

Glad to help!

[@Mitchyymitchmobile]

That angle drill where did you guys get that from it was battery powered the one the old feller used to take off the manifold bolts

[@BEASTProjects]

I believe it was Snapon

[@mikemontgomery4378]

Great informational video compared to others out there....very nicely done.

[@BEASTProjects]

Thanks Mike! Have a great weekend.

[@wolf-bv6lg]

The more I watch this, the more I like my stock headers. 😁. Great job. Can you tell us how long the install took?

[@BEASTProjects]

About 5 hours w/ both of us working on it.

[@AntonioClaudioMichael]

Corsa makes beautiful exhaust parts headers and pipes

[@BEASTProjects]

Right!

[@2rztaco]

What was a rough estimate on how long this took?

[@nobull8544]

Good job! Just finished long tube Kooks on my Redeye. The top 2 middle bolts on the pass side had me wondering why I ever started this, and I did it on a lift. Sucked more than the Charger, actually like to the 10th power. Ran out of curse words. But like you, I got it done. Oh I did exactly the same as you...disconnected that coolant hose while car was warm, fountain of AF...car dripped AF on me for 2 days

[@BEASTProjects]

🤣

[@JacobTheProdigy]

Bro I just literally went through that disaster 😭

[@Boriqua915]

I just did mine on my charger 2021 and literally the same 2 middle bolts on the passenger side made me want to give up. Ran out of curse words like you lol. I got it done though. Had to finger it in and squeeze my finger tips in there.

[@hector._.7965]

@@Boriqua915I’m actually stuck at that part of the 2 pass side bolts, 🤦🏽‍♂️ any tips ?

[@davidbutler5825]

Great video great mechanic that job ain't no joke definitely will go to shop for that thanks for heads up cause am do it myselfer but not that job 😀

[@erick1348]

Weak

[@ianmastrangelo2427]

Excellent Vid!! Very thorough and helpful. I have Challenger with the 5.7 Hemi and there is a bit of a ticking noise, it's usually either the exhaust manifold bolts or the lifters going bad from what I've learned. Just curious, did you guys remove the catalytic converters because you are going to be putting that exhaust system on or because you had to in order to get the stock manifolds off? It's really a shame that the chargers and challengers have the wheel well sealed like it is. On a ram you just take off the wheel well splash guard and then you have access from the sides as well.

[@BEASTProjects]

Thank you, we were actually installing long-tube headers. Here’s that video: kzbin.info/www/bejne/mqGlgqeumL5gkK8

[@lilfredlo24]

What's the estimated price for this job

[@robsorgdrager8477]

Any extra steps for an AWD V8 2016?

[@germandale4945]

HEY LOVE VIDEO FIRST IVE SEARCHED ALL OVER. I HAVE A 2006 DODGE CHARGER SXT 3.5 AND I AM INSTALLING A NEW FUEL TANK CAN YOU TELL ME WHAT IS THE PROCESS OF REMOVAL OR IS IT THE SAME AS THE VIDEO?/ THANKS

[@AntonioClaudioMichael]

Great video very thorough

[@BEASTProjects]

Thank you!

[@austinike9182]

I watched the video on your Cat-back install and the link had a 2.75" exhaust but these headers are 3" did it come with a reducer so it fits in? I have a borla on mine and was thinking about getting long tubes with highflow cats maybe. I'd appreciate any help/advice

[@solitude2871]

Is the process any different for the hellcat

[@MJ-ck1uc]

So you have to remove the oxygen sensors?

[@1470boyz]

Yes

[@MJ-ck1uc]

@@1470boyz no you don’t

[@Chriselectricfingers]

Hey were is the exaust pressure sensor located ?

[@onefastlife5017]

Let me know how that goes with codes boss, I did magnaflow mids w/high flow cats on my 07 Jeep 6.1 with borla cat back and I’ve had nothing but issues with codes & not on the read sensors only on the upstreams

[@BEASTProjects]

I have Hemifever tuning & no issues..

[@justinvaughan3579]

phenominal video!! Confused about the knock sensors. What did those need to be removed for?

[@BEASTProjects]

Thank you, we just removed them for clearance & reinstalled them.

[@ryanmckenna2521]

Guessing my Challenger is going to be very similar

[@brianschargerrt9416]

How long did it take to install headers? I have 15 Charger RT that I'm trying to find someone to install just some shorty headers but nobody wants to get involved. There saying Mopar says its a massive job and a lot is involved with it. Rough estimate on what it would cost on average to install?

[@BEASTProjects]

It's a big install & time consuming... Labor will vary & it took about 8 hrs with two of us.

[@hemi5.7villain]

I'm get Srt header's on my 5.7 hemi 07 Chrysler Aspen

[@aidin7771]

where can i order it?

[@jrichey9278]

what was the shipping time for your corsa exhaust?

[@BEASTProjects]

Shipping from OH to PA was only 3 days.

[@Cubanogar]

Did you keep the stock manifolds?

[@BEASTProjects]

I did...

[@AntonioClaudioMichael]

Large job

[@jeffh6971]

TEASER!

[@venixyt2578]

I hope the next video .. works method or configure pops392😎😎😎😎

[@carlosordonez7653]

best video thanks

[@kinzzkulture9229]

dude whats that in the trunk?!?

[@BEASTProjects]

kzbin.info/www/bejne/goC5YqCiaMygg5Y

[@kinzzkulture9229]

Ohhhh Yo this is dope! I’m hoping to buy one of these cars one day and I want mine to me just like yours😁

[@kelinjohnson7421]

so easy to do this on a car 1 years old the rust haven't really set yet. now my car lol whole other story

[@BEASTProjects]

I bet! Haha

[@lmjames33]

@BEASTProjects why do you remove the intake manifold? I've been seeing all these vids of exhaust sound and people saying you need to remove intake manifold.

[@juaninelmascabron2141]

If you had to pick one.... 6.4 hemi or 6.7 cummins? GO →

[@BEASTProjects]

Cummins

[@anthonysourdiff1835]

Looks like a lot of work

[@BEASTProjects]

A LOT

[@okc_garage]

Look at all that room you have to work with lol. Reason 675,871 you need another cummins bro!!!

[@BEASTProjects]

One day, trust me, it will happen.

[@okc_garage]

BEAST Projects i know i just love giving you a hard time.

[@JMSynthetics]

well there not the worst looking factory manifolds i have ever seen

[@BEASTProjects]

Agreed, we were pleasantly surprised.

[@mikestrucks]

First like 👍🏻