How to Survey using Emlid Flow + Giveaway Results

[@scottkarlins]

Congrats Darryl McCall Sr.!!

[@shookerng2]

hi Rami, really good video, I have learned a lot watching your videos. I put together 2 gnss with the emlid m2, and I have based myself on your teachings, really thank you very much. greetings from Michoacan Mexico

[@paulsheba3241]

Why is there a shift been your survey and the base map? Do you still need to do a Transformation or perhaps you didn't perform a site Calibration?

[@abdelrhmanahmed8408]

Hi Rami, Could you please make some videos about ground penetrating Radar?

[@many_worlds]

tilt compensation will be a great addition to this device

[@NipkowDisk]

Emlid is terrific! Have a pair of RS2s for post-retirement hobby surveying.

[@shialeto]

really love emlid, nice video!

[@garrettpage7774]

Congratulations Darryl!!

[@franklynrosariotubandido3788]

Hello Rami. I use RS2 but I can not connect to Ntrip (RTK2go or Emlid Caster) So my question is ¿If I subscribed to Emlid flow I will connect on Emlid Caster?

[@citizenphaid1880]

Absolutely love your videos and I don’t even do survey work 😂 looks interesting though. So could you use the little RX to set a number of gcps and incorporate it into drone survey work where you have a basic drone without rtk?

[@CrossfitSergio]

This type of videos are great! I'm a student from Spain and this is helpful for me, than you!

[@sylvaingiroux9741]

Hey great video. How do you transfer your points from grid to ground? And how do you find the scale factor?

[@philcaruana9540]

Amazing

[@luistoledo1402]

SALUDOS Y MIS MEJORES DESEOS A AMBOS. DESDE CIUDAD REYNOSA, TAMAULIPAS, MEXICO

[@BERNARDIN_1986]

Hi Rami, great video. How would you explain the shift among the data you collected vs the base map of the back ? what is the reference system that ground map uses?

[@mitchmackenzie3293]

The satellite imagery basemap is most likely WGS84, which is a different system to the local coordinate system Rami chose in job setup

[@maxkuripko232]

Now I'm love emlid reach rx) beautiful

[@daouadiabdesselam1650]

How about precision

[@Pedroalcantara30]

Aprecio muito o seu trabalho. Seus vídeos me ajudam muito e agregam em meus estudos diários. Abraços do Brasil. (I really appreciate your work. Your videos help me a lot and add to my daily studies. Hugs from Brazil.)

[@hey_Wanjiru]

What if I need contours

[@williamhollingworth4747]

Wow awesome! How well would you say this device stays RTK fixed even by obstructions? It didn’t seem to struggle at all with the trees

[@ctpusa1]

Wanted to make sure I heard you correctly. You can import .dxf linework into Flow and stake to 2d and 3d lines?

[@erd21]

Hello. Could you say what surveying telescopic pole do you use?

[@a2k-media]

Hi Rami, thanks for all the interesting videos. I purchased the Emlid Reach but I can not find out how to import the csv Data into DJI Terra. Do you have any experience with that?

[@xdeepak12]

can you do a video on road alignment survey using coordinate system

[@titotitotito]

What did you use for a base?

[@vp62ift]

Nice congrats to the winner

[@parexc07]

How do you like that Emlid expandable rod pole?

[@nafnist]

Im only on yt. And Id be the only one with Emlid (never seen anyone with on)

[@legadoboliviano]

Muchas gracias por compartir!!!!!

[@ArjayMartin]

Congrats

[@ernestohernandezbanuelos6919]

El servicio de correcciones NTRIP es gratuito o tiene algún costo? Y si tiene costo cuál es?

[@chico3liz]

Depende donde estés. Yo vivo en Texas y aquí si tiene costo. Unos estados es gratis

[@ernestohernandezbanuelos6919]

Yo estoy en México,

[@ernestohernandezbanuelos6919]

Sabes cuál es el costo aproximado por mes?

[@franklynrosariotubandido3788]

saludos. en la pagina de Emlid dice que es gratuito, pero no logro conectarme. si obtienes alguna infirmacion por favor comentame si te es posible.

[@ernestohernandezbanuelos6919]

@@franklynrosariotubandido3788 Si tienes la base y el Robert las correcciones NTRIP es gratuito, pero si solo tienes el Robert tiene un costo mensual, aquí en México de $ 100 Dls. Aproximadamente, saludos

[@zinedine9939]

Hi Rami Please who is a winner of RX receiver?

[@zinedine9939]

I am your follower on KZbin and Instagram !

[@abdirizakhussien1197]

Hi Eng it's Abdirizak

[@sprasadksp]

Hello Rami , I am a freelancer I work on ortho, mapping, lidar and uav data too . I will be providing outputs like orthophoto,DEM ,DSM, colour point cloud, CONTOURS and MAPPING.and data matching with gcp also.please contact if u need any DATA SET to be processed.

[@littlenel17]

I’m watching the video in real time as I’m typing this and I gotta say…this does not look accurate one bit. The asphalt 1 line is showing your shots well into the grass and the asphalt 2 line is showing the shots in the middle of the walking path.

[@RamiTamimi]

That’s because the aerial projection is not accurate. The aerial projection is designed to guide you in the general location of your site, however, it is not accurately georeferenced to be in the right spot like your points and lines are.

[@littlenel17]

@@RamiTamimi do you think the unit itself is pretty accurate to use? Like is this something you would use to lay out a road with curb and sidewalk, drainage, etc?

[@baddogastro]

@@RamiTamimi So, if I am understanding this correctly, the image is not in the correct location but your points and line from the Emild RX have absolute accuracy or would you need to add a Base station for absolute accuracy, instead of using a CORs network/NTRIP?

[@baddogastro]

@@marknielsen9315 Yes, I finally figured that out. For absolute accuracy you need a base station over a known point,. But, how do you locate known point around my area in NYS and abroad? Thanks in advance, you are a valuable resource.

[@quentins8165]

@@RamiTamimi This is actually one of the reasons i'm looking into this type of work. I'm a drone operator out in Canada and this looks great for aerial mapping. Ease of use wise. Would you recommend using an Rs2 as a base station for better accuracy?