Ran when parked! Not likely...

Рет қаралды 42,683

Күн бұрын

Пікірлер: 119

@vikingnorm6935 6 ай бұрын

Nice!!! I absolutely love Wheel horses, I run 1 for everything, I wish I could save them all!!! Can actually maintain/repair them, they were built to last, the new tin junk I just can’t get used to

@LaidOffGarage 6 ай бұрын

A little update on this tractor. I ended up putting a restored 42” deck on it. Sold it to a feller down the road. He repainted it and has been cutting his yard with it all summer!

@SteveHecht-t4j 3 күн бұрын

Nice shop and thanks for all those good tips. Getting ready to start on a 1968 Raider.

@gregorysmallenginelawnequi7471 10 ай бұрын

I love seeing people put the time and a little bit of money to bring bank the equipment instead of throwing them away and buying the crap they sell today. I got at last count 128 mowers, trimmers, generators, pressure washer, and tillers, all of them 10 plus years old. 14 of them are riding mowers. Most of problem with them are old gas related. Keep doing what your doing maybe the youngsters will take the hint.

@Tennesseemountainhomestead 10 ай бұрын

Wow! You sure have an impressive fleet of equipment! Love to see a video sometime on all that stuff!

@Rein_Ciarfella 10 ай бұрын

I’ve lost track with how many pieces I’ve got. 😂 I’ve run out of room in the garage and the yard is full too. A while back I realized I wouldn’t have time to repair and flip all of them in a few years, so now I’m really picky about what I’ll accept for free. Haven’t paid for any in at least two years. I’m considering converting a spare bedroom to storage so I actually have enough room to work in the garage. 😂🔧👍

@josephcizek7030 10 ай бұрын

Do a poor man's restoration. I have a 1984 Wheelhorse 310-8 to get running for my grandchildren to use for the summer. You have answered many of my questions as to what I need to do. Thank you and keep up the good work.

@LaidOffGarage 10 ай бұрын

Glad I could help! Feel free to reach out if you have any questions!

@bobRissman 4 ай бұрын

I had the same issue as you no spark to the plug my Wheel Hores is A B 80 . you did a great job getting it running.

@lonhoschar1943 10 ай бұрын

That was a really nice find!! Great sounding engine too.

@Rein_Ciarfella 10 ай бұрын

Floor jack as auxiliary fuel supply support and parts washer doubling as temporary work table - brilliant, dude! 👍

@M.TTT. 10 ай бұрын

if it has a flat top at or near waist height, its a work table LOL

@VikingShipExplorer 4 ай бұрын

I have quite a few of these old cast iron Kohler's from 10 HP up 16 HP and even have one of the elusive 18 HP engines with the extra fins ( It overheats ). If I had to choose one kind of engine, this would be it. Briggs flat heads are great as well, but I love the Cast iron Kohlers the best. I'm glad you were able to save this one and pass it on.

@lsbraswell 10 ай бұрын

Me and my Son pulled a 77 B-60 out of a shed last year. Its a good little tractor. Mine is pull start only. We've also got the mowing deck for ours in nearly perfect shape. Still has the dealership stickers on it!

@skippymud 10 ай бұрын

Awesome video. Your investigation procedure was absolutely flawless in my opinion. Depending on how much time you have, I would tear it down and give her a quicky prep, prime and paint. But with that you will probably find worn parts in the process which is more dollars (idler pulley, belts, etc). I would do it anyway, and maybe change the trans fluid while yer at it :-)

@xcalibre222 10 ай бұрын

Should have put a litle oil down the spark plug hole before cranking an engine over that's been sitting a long time to reduce chance of scoring. Those old Wheel Horses are built like a tank unlike newer tractors. Nice find.

@LaidOffGarage 10 ай бұрын

It dawned on me when I was editing the footage that I never even pulled the spark plug out and still haven’t lol!

@DanSuneKronvold 10 ай бұрын

Congratulations! You've got a running engine. Now only the rest remains.😉 And thanks for sharing.

@billjunking_fool5549 10 ай бұрын

Wow that was a good deal I have one similar to that my gas tank is mounted Under the Seat mine originally was that way I use it all the time good yard tractor

@goose278 10 ай бұрын

Great find! Would be a lot of fun to restore. Great video thanks for sharing

@bertgrau3934 10 ай бұрын

You got lucky. Most times, I have not just carburetor problems, but valve problems, and ignition. Sometimes camshaft problems as well. Glad you aren't having the problems I have had with older equipment. Sounds very good, I wish you lots of luck. Thats a nice machine.

@divinerapidstech6399 10 ай бұрын

My B100 is great. Same issue with front wheel, welded it and good to go. Bought an amazon carb and no problems running. Really plows snow well. Chains and wheel weights and away we go!

@MattLaw-y9d 10 ай бұрын

Keep it be something fun for the yard to play around with and keep you busy!

@Rein_Ciarfella 10 ай бұрын

My first mower at the age of 12 (around 1959) was a brand new Toro my mother lent me $80 to purchase. I had it paid off in no time and it stayed in the family for years. Since I have an attachment to that name and seeing these for the first time, if I ever come across a freebie I’d probably restore it for personal use.

@peckerwood6078 3 ай бұрын

My vote! Go totally crazy with a motor out, head gasket, rewire, new belts bearing's paint & decals. see how nice you can get it without selling the farm.

@t.j.h2810 10 ай бұрын

Keep it !!, if you sell it the money will be gone and you'll wonder where it went. I've got a 82' model Case 220 mower/tractor I bought used in 85', 100% steel & metal, no plastic and I've got it running great even with mega "K" hours on it. I couldn't replace it for 12,000 $ nor would I do an even trade for the highest priced zero turn out there. Don't rush a rebuild / restore just do a little along, it'll serve you well. Can't beat the older Kohler engines either.

@cateward7043 2 ай бұрын

Love your videos!!!!

@michaelfarris2556 10 ай бұрын

I have a c-121, and it's a work horse. Can level out gravel push dirt and cut grass. They can even be used use just to pull stuff around. All around, a small tractor. So, it's endless possibilities for you.

@LaidOffGarage 10 ай бұрын

I've got a 416H with a grader blade and it's a blast to use!

@hiscifi2986 10 ай бұрын

I thought your Ultrasonic Cleaner was not working, as it did not make that 'Ultrasonic Noise', and there was still some residue left on the carb. The track rod needs to be lengthened to make those wheels track true. Some times one track rod end is left hand thread, and the other is right hand, to make it easy to adjust.

@arikaplan8904 2 ай бұрын

I love it and everything about it my one question is what's up with the front wheels are they confused when's going north the others going south

@texascottonfarmer 10 ай бұрын

😊😊👍👍👌👌 Well done! But, I wouldn't be so quick to discard those rusty mower deck parts.

@markturner5996 10 ай бұрын

Levi,I would suggest you limit your crank time to 5 seconds,with at least 1 minute beaks between.. even new starters cann melt down when overcranked. . Since your engine started I feel sure you will get that ironed out! Now, how about repairing that deck? Sounds like another video to me...!!😊 I vote for a fresh coat of paint for that old warrior!!

@doylerabjohn3435 10 ай бұрын

Great video, It would look great if you leave the patina & love to see it fully functioning. I would keep it as a yard tractor.

@LaidOffGarage 10 ай бұрын

Thanks for the input! I also like the idea of leaving patina!

@gjohnston281 10 ай бұрын

There is also the dollar bill trick to clean the points, my old 71 dodge use to need it done fairly often lol

@michaelbenoit248 8 ай бұрын

They make a transducer that can extend the life of points for these tractors.

@rexfreelom4300 10 ай бұрын

KOHLER with the tube into the oil filler hole and let the positive crankcase vent thru two foot tall tube with 2 1/2 ft long dip stick that is to be store in a shelf. The vent is to steam out of its oil smoke or either way spill a small spit of black grease thru the high performance engine.

@Rein_Ciarfella 10 ай бұрын

I suspect the issue with that fuel tank was a clogged pencil filter which lives inside the tank and is accessed when the fuel line is removed. Either that or the fuel line was collapsed internally.

@russellpetrie119 6 ай бұрын

alot of them about maybe break down restore parts sell out or hold tight see if the market changes and fix her up but need a deck for it that could be the deal breaker

@LaidOffGarage 6 ай бұрын

I installed a rebuilt 42” deck on it and sold it to a feller down the road from me. He mows his yard with it every week!

@peckerwood6078 3 ай бұрын

Ok! So great video! Now to nit pick a bit on an otherwise great video. By practising some techniques that you should encourage in others can possibly head off some problems by not fixing it if it ain't broke! Specifically your ascetic technique. Once you had pulled the carb off it would be job one to "Dust it off". with a medium bristle brush just to knock the dust bunnies down a little before removing the bowl. Even better then spray it down with some carb cleaner before taking the bowl off and then wipe it down with a clean or even oiled rag to take off the residual crud before opening up the bowl or removing the jet's or air screw. Best to remove as much crud as possible before opening it up and then after you open it up and want to clean it up totally with the sonic bath, you're not filling the bath water with a huge amount of filth and expecting a clean part to come out of all that dirty solution. Just sayin'. Again with the power tools to disassemble a carb??? Really? If you don't use your hand strength you'll likely be using that gosh durn thang ta over torque and strip it when putting it back together. Maybe you're a genius with the power tools but others who are not will be creating untold grief for themselves by following your example. Nice job on the fresh fuel line all round. New filter and off to the races!! I just bought the identical tractor 2 weeks ago and it's a lot of fun getting it freshened up and running. Will be watching! Best Lee PS everybody forgets to turn on the gas at least once in a while.

@TheCanadian-f6s 3 ай бұрын

That old wheel horse looks like it lived a hard life

@LaidOffGarage 3 ай бұрын

And it's still going hard at it!

@Rein_Ciarfella 10 ай бұрын

Any time I start to work on machines I spray starter fluid first before I even think about the fuel system. That way if it fires I already know I’ve eliminated air, compression, timing and spark, so the only thing left is fuel. FACTS! 👍 Since Fuel is the culprit 90% of the time I always have that one in mind as the most likely culprit.

@EricClark-io7rf 10 ай бұрын

Love to see a full restoration

@M.TTT. 10 ай бұрын

I'd never bother restoring past fixing/preventing rot/rust. Fix to use or mess around with, around me I doubt I'd be able to sell it for $100 running.

@LaidOffGarage 10 ай бұрын

I've learned that there is very little profit margin in the market of old tractors! I like the idea of preserving as well!

@M.TTT. 10 ай бұрын

@@LaidOffGarageexactly, well said.

@gregorypierce6703 10 ай бұрын

Got a picture of the data plate on the "parts cleaner" from Harbor Freight?

@LaidOffGarage 10 ай бұрын

I do not, but I just searched the website and got the SKU for you. 63256, that is the model I have.

@97superwow 10 ай бұрын

To me it sounds like it’s not getting power to the coil until you switch the key back to the run position. Like it’s not getting power with the switch in start position. The coil wire might be on the wrong pin on the switch

@jerryboyle92 10 ай бұрын

I heard that too.

@77gmcnut 10 ай бұрын

If it were mine I'd do a Mechanical, electrical only restoration. clean it up. Knock down the rust and perhaps hit it with clear coat. I wouldn't refinish it and try to make it look new. Just make it work and appreciate it's battle scars.

@LaidOffGarage 10 ай бұрын

I like the sound of that as well!

@michaelbenoit248 8 ай бұрын

If I get these things for cheap I always try to keep them. Its worth it just for the engine cuz it’s rebuildable. Those Kohlers are pretty stout engines. The cheapest I’ve paid for a tractor was $100 and it was abt rusted out but had good usable parts I wanted. 15-40 is actually a good oil for these because the oil in the 80s had more zinc in it that the Dsl oil has. Any old engine run 15-40 unless it’s a 2-Stroke Detroit. 10-30 is kinda too thin for these engines. Thing is 40+ yrs old, tolerances are not what 10-30 should be so 15-40 is a good choice.

@jerryboyle92 10 ай бұрын

I am assuming you had your points at the top of the cam lobe when you gapped them. Looks like a nice old tractor.

@LaidOffGarage 10 ай бұрын

It's funny you say that because after I set the gap I realized that I hadn't checked timing before doing so! spun the engine over by hands a couple times off camera to make sure I did it right !

@jeffslawnandgardenmaintena4831 3 ай бұрын

I would love to see it restored

@Rein_Ciarfella 10 ай бұрын

With the air cleaner missing for who knows how long, I’d be wondering about the condition of the piston, rings and cylinder. Also the fact that the oil was so low. Did you do a compression check?

@LaidOffGarage 10 ай бұрын

It's been a very good investment!

@tomdennee3974 10 ай бұрын

Thanks for the video. It's good to see the old Tractors running again. If you bought it new at today's prices it would cost $10,000 for a he quality of the Wheel Horse. If you can bring it back to like new.

@atariforever2002 10 ай бұрын

Budget restore would be some great content

@Rein_Ciarfella 10 ай бұрын

Is the word for which you were hunting “ultrasonic”? Hey, at 76 I have to wait a few minutes sometimes for the right word to come to the surface! 😂👍

@richardclifton4120 10 ай бұрын

I would think about restoring that deck if the parts such as the spindles are still available. Have you seen the price of stamped decks nowadays? I have a Cub Cadet that is about 12 years old and I replaced the deck, but I am going to repair the old one with a little welding. The one I replaced it with was $200.00 bare, now that same stamped blank deck is over $900.00. You seem to have a viable garden tractor of sorts, so why replace it with today's junk that costs $3000.00 or more? I've seen some of JD's lawn tractors costing over $10,000.00.

@Rein_Ciarfella 10 ай бұрын

Could you direct us to your source for manuals you’re using for these?

@M.TTT. 10 ай бұрын

google "make/model service manual", sometimes find em on old forums. Cheers

@LaidOffGarage 10 ай бұрын

wheelhorseforum.com has a huge selection of literature. I've been able to find every service manual I've needed on that site.

@bbmoroski9396 10 ай бұрын

Cheap resto bro and sell it. I enjoyed the video. Thanks.

@andersivarsson849 6 ай бұрын

I have a Belgian-built WheelHorse and it was really confusing trying to get all the clues togheter and realize that, it has "wrong" engine, trans and so-on.....

@gjohnston281 10 ай бұрын

If you need or want to move that tractor easier around the garage you can buy Dollie’s from Harbour freight. They are usually made from 1x3 and have four casters on them , buy 4 and put one under each wheel and you can move this tractor anywhere in your garage you would like . Works for Atvs , snowmobiles etc. I think the size is around 14 inches more or less

@LaidOffGarage 10 ай бұрын

Tha'ts a good idea!

@goofe.washington953 6 ай бұрын

It really IS purring after installing that cleaned carb.

@jaybirdbird2862 4 ай бұрын

i like the old ones have several different brands most run just cant keep batteries up

@LaidOffGarage 4 ай бұрын

I feel like all I do is support battery and tire dealers!

@dalepoppenhagen8549 4 ай бұрын

But is it a 12 volt or 6 volt

@toddosterhout9866 9 ай бұрын

1977 would definitely have been 47 years ago. I was born in 76. 😂 Definitely in decent condition for its age

@LaidOffGarage 9 ай бұрын

Maths can be hard sometimes lol! Thanks for watching !

@Rein_Ciarfella 10 ай бұрын

As to what we’d like to see you do with this one moving forward, I’m inclined to go along with whatever you have in mind. I’d rather see you do something you enjoy, whatever that happens to be. Have you checked forums to see what kind of following they have? I’m guessing there are collectors who would purchase these in any condition for restoration or parts. You sort if discounted the original deck, but I’ve seen people repair ones in that condition, which would keep a major component original.

@swhod2190 10 ай бұрын

Do a poor man's restoration and use it! Great video!

@ralfie8801 10 ай бұрын

Restore it, make it cut grass again. Those are such good mowers because they were made to last. The first rider I ever used was a Wheel Horse like that one, but about 8 or 10;years older.

@stoptheirlies 10 ай бұрын

You need air going into the bottle for fuel to keep coming out!

@LaidOffGarage 10 ай бұрын

The bottle was sucked flat by the end of this video lol!

@fishaussie9112 4 ай бұрын

🇦🇺great video

@corydriver7634 10 ай бұрын

47 years old 😂 I never do math in public. 😂

@LaidOffGarage 10 ай бұрын

It was a struggle! lol!!

@rockcrusher4636 9 ай бұрын

Fix it, they are worth quite a bit, Wheel Horse quality. Cheers.

@rickbroerman9267 4 ай бұрын

Keep it and paint it

@Evilslayer73 10 ай бұрын

It deserve a restoration this engine is like new :) need some love !

@jorgennorrman4023 9 ай бұрын

54 years old, not 44 !!👍

@LaidOffGarage 8 ай бұрын

I've learned to never do math on camera lol!

@jorgennorrman4023 8 ай бұрын

@@LaidOffGarage yeah, I'm sorry ! My bad, of course it's 44. I'll blame my ears or my 🧠 at the moment of the incident !!😉🙂👍 You know !? i woke up the same night i wrote the comment.... 😯😳 Doogh !! Of course it's 44 !!! 😵‍💫😂👍

@JerryMcDowell-ex6rx 2 ай бұрын

Keep it restore it

@rexfreelom4300 10 ай бұрын

You have All is roller and pull start with rope for it is very big flywheel and lawn cutting blade. The hopper chipper gas power is pull rope 16 HP Craftsman best kind. The magneto inside wheel horse 10 HP is bring out the 8 volts then you need 6 volts battery or 6 volt start it. If the magneto that you must spin and rotate fast by hands and see if it is 14 volts output. Mighty Max Lithium Iron phosphate YTX7L-BS 12 volts.The LiFePO4 dimension is 5 1/8 inch tall x 2.6 in. Width x 4 1/2 in. Long. U1 is the oldest battery for it's EVERSTART Lead acid and water distilled electrolyte.

@hunter47able 3 ай бұрын

I would restore it, especially if you have a deck

@jimmiecatrett7371 10 ай бұрын

Build it, I don't think you can lose with this one

@tommygray1763 10 ай бұрын

Get some plows use to plow your garden

@LaidOffGarage 10 ай бұрын

I've made it a mission to have a tractor for every implement so I never have to swap attachments lol!

@ronniehall1520 6 ай бұрын

Make it look good

@andycallow5052 10 ай бұрын

if that lived outside it probably has water in the transmission.

@LaidOffGarage 10 ай бұрын

Will for sure be getting changed in the near future!

@ScottButler-im1cm 6 ай бұрын

I love wheel horse tractors I’ll give you 300.00. Wounder how much to ship it

@LaidOffGarage 6 ай бұрын

Sadly it’s not mine to sell anymore! Feller down the road got it and has been mowing his yard with it !

@glennjukes5581 10 ай бұрын

That is not the right original kind of gas tank on that B100.

@Rein_Ciarfella 10 ай бұрын

Levi, could you please increase the audio overall? Yours is pretty good, but there are times when you’re not as close to or addressing the mic and it’s difficult to hear what you’re saying. As I tell creators all the time, on our end we can always adjust our volume down but once we get to the maximum there’s nothing else we can do. Thanks, buddy!

@LaidOffGarage 10 ай бұрын

Thanks for the feedback! My video editing skills are slowing getting better and I've been trying to address the audio quality issues. The purchase of a mic is in the near future!