Here is the stage of taking it from cloth to a hardened speaker box. Because of the video run time I decided to make it a 3 part video heck maybe 4 part but most likely not. www.amazon.com...
Пікірлер: 106
@dennisdalgaard6014 жыл бұрын
You are making good videos, but you should consider turning off the music so we are able to hear YOU, cause that’s what we watch your videos for. Keep up the good work thank you 🙏🏻
@RandomAudioGuys4 жыл бұрын
Thanks and dearly noted.
@kevinlivingston95638 жыл бұрын
Long time listener, first time caller. Just wanted to say you are very informative and funny. I also liked that you really stressed safety when working with fiberglass. Great channel keep up the good content!
@SprayWayCustoms8 жыл бұрын
I'm loving it....you got a great channel going
@michaelj37258 жыл бұрын
Thank you soo much for the very informative and clear instructions on these videos! I sure hope to see many more from you soon. Again Cheers! Much appreciated
@RandomAudioGuys8 жыл бұрын
Thanks we will be offering many more, Reviews, Wood builds, More fiberglass and try to keep it as informative as we can. If we miss something just ask us and we will answer for you. Thanks again for subscribing.
@ShanesHobbyShop8 жыл бұрын
looking great, wished I was there helping you. I really want to learn this...
@afar95876 жыл бұрын
try to apply the fiberglass from the inside of the enclosure, makes for a cleaner sanding
@ek49507 жыл бұрын
thanks buddy. That was a quick response. I'm building a center console and i am thinking of fiberglass
@RandomAudioGuys7 жыл бұрын
Awesome we will have a build of one coming up. You may want to check out the other video we posted , we just did one. shows the work that goes into one, It is a wood one but I think it might give you some ideas.
@user-fl6dt6ku3n7 жыл бұрын
Random Audio Guy The fabric used is called I was not listening, not Thailand. I read English
@RandomAudioGuys7 жыл бұрын
Polyester Fleece
@user-fl6dt6ku3n7 жыл бұрын
Thank you for your help.
@hendhend58017 жыл бұрын
cloth (wovin roving) is stronger than chop strand, chop strand is more cosmetic
@damianramey56015 жыл бұрын
Well damn! Never thought to use a flush trim bit and router to recut the speaker holes after the resin sets up.
@neonnerd13646 жыл бұрын
The music in the background ruined the entire video.
@JesseG18704 жыл бұрын
I liked it. But then again I'm not a Debbie Downer.
@southeastjeeps64464 жыл бұрын
what is the name of the material that you used to stretch over the wood
@treynathaniel40755 жыл бұрын
Cloth fiberglass is stronger than chop mat....chop is for molding,you got it backwards
@RandomAudioGuys5 жыл бұрын
Thanks for the clarification.
@abc-ed1nr9 ай бұрын
This is an old video but I have a question - do you wait for the fiberglass resin to harden between coats or do you put them on wet? If the resin does harden, do you have to sand it between coats!?!? Also, when I have mixed a larger cup of resin, it hardens faster and I end up wasting a lot. Is there a trick to mixing a lot of resin for a larger project?
@RandomAudioGuys9 ай бұрын
Yes I let it harden between coats. But now days I use a UV cure reasin which allows me to set it up completly indoors and step out into the sun when its just the way I want it and it all cures at 1 time.
@jackalninezeronine7 жыл бұрын
WOW This stuff is COOL
@Skitad3 жыл бұрын
Crazy technique
@rockytoptech13082 жыл бұрын
Hey man so I wanna make certain, you mixed the hardener with the resin before painting any at all on right??? Once while attempting this my resin was hardening before I got done painting it on, what's the solution to that problem? Use less hardener?
@user-fl6dt6ku3n7 жыл бұрын
The fabric used is called I was not listening, not Thailand. I read English
@mustafamustafamustafa85706 жыл бұрын
๋ธนกร ศรีสมวงษ ์ fleece
@DJ_Blaker4 жыл бұрын
Thank you for the informative video!
@JesseG18704 жыл бұрын
Thanks for the videos.
@Grayback19736 жыл бұрын
Hey Random,Just got the spare tire well done.Only the bottom and half the sides got glassed.I used 1.5oz mat and did 3 layers.As I said the majority of the box is wood and the floor that is glassed is only 13 inches deep with lots of curvature.All of this work and now I'm worried that the subs won't sound good.Do you think I used enough mat?
@RandomAudioGuys6 жыл бұрын
3 layers seems pretty thing if its a hefty subwoofer.
@Grayback19736 жыл бұрын
Random Audio Guy I actually did 2 more layers(5 total).I'm going to check it for flex and probably add a bottom center brace to stiffen the whole thing up.
@KevinAxelsson-ce7vh11 ай бұрын
How did you remove the wood inside?
@davidbradford387 жыл бұрын
color of resin reminds me of grade school this stuff they called swish n spit lol
@octoberb1833 жыл бұрын
Thank you brother
@ek49507 жыл бұрын
i have two questions. 1.what kind off resin is that. I heard you say you don't need to add hardener. 2.Can it be use on any type of fiberglass material
@RandomAudioGuys7 жыл бұрын
paa kwesi and 2 answers. it is called a uv cure resin. and yes it is usable in any product that you can get uv light to. we have uv lamps for working inside vehicles so we're able to use it anywhere. if it's a spot that you cannot get to then you can use a harder in it and it will react as a normal resin.
@mrlovethatbass217 жыл бұрын
Random Audio Guy what kind of uv lamps ?
@RandomAudioGuys7 жыл бұрын
Most any light will put out UV, But there are a ton of options, And it will all depend on where you are working, We keep small and large lights to do these projects.I would hit Google and start looking for UV lights for curing resin, you will see a lot of choices.
@mrlovethatbass217 жыл бұрын
Random Audio Guy I'm working in my truck and fleece my wall
@RandomAudioGuys7 жыл бұрын
Well you can use a catalyst in it ( Hardener ) to make sure it sets up. Its just a Resin where the UV Rays from the sun or any UV Source can work as a natural really fast hardener. Other than that its the same as any other resin.
@Tommy-B.3 жыл бұрын
Damn the volume between part 1 and 2 blew me away.
@RandomAudioGuys3 жыл бұрын
Sorry, it's an old video and my first so I was learning how to edit.
@xzombieswatteamx8 жыл бұрын
do u have and clips on just all the stuff you should buy to make a boxs. pretty much a list of tools and products you should buy to make a boxs. cause im thinking about making a boxs for my 1978 cj5 jeep. to insall 4 6.5 doorspeakers on my roll bar
@RandomAudioGuys8 жыл бұрын
I can give you a list but Ill make sure to get that in a future fiberglass video. Youll want Resin, Fiberglass Cloth and or Fiberglass Mat. Some MDF Rings, MDF sheet 1/2 inch. A stretchable fabric or fiberglass fleece. Paint brushes ( Cheap nothing to costly as they are disposed) Acetone for cleanup and keeping brushes soft until your ready to disgard them. That would be the main list on the table if I were to do that project. I would recommend baby powder spread on your arms to stop the fiberglass from entering your pores and itching. Also a resporatior and gloves.
@xzombieswatteamx8 жыл бұрын
+Random Audio Guy ok txs yea if u ever have time to make a list of everything i should need to do it email at xzombieswatteamx@gmail.com when ever you have the time.
@kellymchenry19443 жыл бұрын
The background music made me turn the volume off
@byronmccastle5 жыл бұрын
The name of the resin would be great to know instead of just holding wobbly in front of camera.
@RandomAudioGuys5 жыл бұрын
I'd tell you the name but at this point I'd just assume you kiss my arse. You took the time to make a stupid post instead of just saying hey care to pin the resin brand. So I'm taking the time to write one back that has no informative information regarding what brand was used.
@TheMichaeljordan23964 жыл бұрын
What resing is good and with what is mixed?
@RandomAudioGuys4 жыл бұрын
I use Sun Cure resin, The reason I like it is because you do not have to mix it, You just use it and when your ready to setup you put it outside in the sun for a few minutes and its done.
@burromi62297 жыл бұрын
How much resin you need for a project like this?
@RandomAudioGuys7 жыл бұрын
About half gallon should do a project like this. Or less.
@taufikpin85407 жыл бұрын
you use what kind of fabric in blue ..? is there a particular fabric that is in use ...?
@RandomAudioGuys7 жыл бұрын
I use a few different types, There is fiberglass fleecing, nylons , and other fabrics, go to your close out section of a big box retailer that sales fabric, find something that stretches at least 20% in 1 direction.
@taufikpin85407 жыл бұрын
ok thanks, I really appreciate your information
@nexus7tablet6106 жыл бұрын
Would flow coat or gel coat not be better for smoothing/ sealing before filler?
@josevidal89262 жыл бұрын
How are u what type of fabric
@richardayala8708 жыл бұрын
Hey what is your video set up mic and camera? and how do you have it all set up?
@RandomAudioGuys8 жыл бұрын
I use a Canon HF R600 and the mic I used in these videos I no longer use because I needed wireless so I went with the Sony ECMAW4 its a wireless mic but it works with Bluetooth connection instead of standard RF Transmission. Because its digital its either on or off no static in between. No special setup just a camcorder and a mic.
@nikog40714 жыл бұрын
so that rsin your using already has the hardner mixed into it?
@RandomAudioGuys4 жыл бұрын
In a way you could say that. Its activated by UV light instead of mix9ng a hardener catalyst like typical resins.
@nikog40714 жыл бұрын
@@RandomAudioGuys where can I order this at I'm doing like 6 doors a center console that leads into a sub box and some kick panels and what not I appreciate all the infor on it and thanks for your time..Niko
@nikog40718 жыл бұрын
where can I order the same resin your using in this video I'd appreciate the infor where to order it at thank you
@RandomAudioGuys8 жыл бұрын
Fiberglass Supply with a dot com :)
@eliezernegron3333 жыл бұрын
Dude u forgot to show what u doing from the beginning ? Sad to see a video ware people can't see a backboard or the back of nothing but atleast the sound is perfect . U just have to show more of what u doing ....
@RandomAudioGuys3 жыл бұрын
That was my first video, a lot of mistakes but I do love the feedback. Thank you.
@eliezernegron3333 жыл бұрын
@@RandomAudioGuys I don't meant to sound bad but what I mean is only that beginning part not the hole video plus I don't put thumps down cause it not about the video is so u can take it look at it. But I keep looking at the video to the end and it good ?
@rockytoptech13082 жыл бұрын
Also where do you get your resin and fiberglass???
@RandomAudioGuys2 жыл бұрын
I use UV Resin, Should have a link in the description.
@rockytoptech13082 жыл бұрын
@@RandomAudioGuys thank you so much!!!
@mrericjr37 жыл бұрын
How did you remove the 2 screws with the cloth covering them?
@RandomAudioGuys7 жыл бұрын
The screws holding the 2x4 that was holding the rings up ?
@mrericjr37 жыл бұрын
Yes those screws
@RandomAudioGuys7 жыл бұрын
Well if you notice I did not resin the entire area the sub sit in. I left soft spots and I cut it out then ran a router around it, Once I cut that little area out I removed the screws and I apoligize for not having that in the video. You will see alot more advance and higher quality builds. That was our first build for the channel and It seems the fiberglass is what people want to see so we will be bringing it to the channel and also will be doing extended cuts for those that want more information. Sadly I have had as much as 20 hours of footage on 1 video that I had to compress down to 20 minutes so we are taking this feed back and learning from our editing mistakes and will try to make sure all the details are there, very much like the new console video we did. Its missing alot but it is still 18 minutes long and we learned. We will have a better channel just keep tuned. And ask any questions if we missed something, we will happily answer them.
@papergatorztv70875 жыл бұрын
How did u get the speaker rings to stay in after u pulled the other wood out😂😂 seriously
@RandomAudioGuys5 жыл бұрын
The resin sets up hard as a brick. When you put resin the fabric it soaks through to the wood binding the 2 together. Typically on larger enclosures you would go around the backside of the rings with reinforcement fiberglass.
@papergatorztv70875 жыл бұрын
Random Audio Guy what about the screw I saw you put in it?
@JackCarver108 жыл бұрын
Now just change the shitty music to something bearable and this would be really good
@RandomAudioGuys8 жыл бұрын
I'm on it. let me call Snoop Dog and get him to drop me a track real quick for the new videos.
@JackCarver108 жыл бұрын
Nah, I mean it's obviously time scretched or pitched up / down with horribly encoding technique, it's pretty painful to listen to for an OCD guy like me who is also a sound technician
@RandomAudioGuys8 жыл бұрын
+JackCarver10 yeah I feel ya. Was worried about the usage rights when I started now that I'm learning a bit more I try to use a more neutral music. And keep it turned down a bit more. I'll get the video editing down better. Got some more Fiberglass coming soon for the channel.
@JackCarver108 жыл бұрын
awww yeah, it's highly appreciated, because you're doing really well. Note that the dislike did not come from me. :D
@773fishin7 жыл бұрын
you didnt show hiw to layer
@RandomAudioGuys7 жыл бұрын
Yeah, This was our introductory to youtube. We have more videos on the way that will be showing the different stages. I have learned alot from what people want to see and we will be showing it int he videos. Also alot has to do with time frame, like people watch an average of 4 minutes of a 20 minute video. But in the future builds you will see we have listened to the feed back. Appreciate the comment and hope you stick around to the channel. Been awhile but we have 3 videos about to pop up soon on the channel.
@773fishin7 жыл бұрын
nice appreciate you
@DavidRodriguez-db8hp8 жыл бұрын
where do I find fiberglass sheets??
@RandomAudioGuys8 жыл бұрын
Fiberglasssupply with a dot com. Also your local automotive spots like AutoZone and Advandce autopart store.
@rixanneh186 жыл бұрын
Why the hell would you make a How-to fiberglass video without showing you putting the fiberglass on?!?! Dude. Wow ok. bye.
@RandomAudioGuys6 жыл бұрын
Comment noted, When I film the new videos Ill make sure to edit that stage in for you. If you don't come back Ill go ahead and say it. BYE FELICIA!
@bryantwalley6 жыл бұрын
I totally agree. You would think the title "How to fiberglass speaker boxes" would actually show "how to fiberglass speaker boxes".
@neonnerd13646 жыл бұрын
If you don't know how to lay fiberglass then why are you watching this video?
@ooi_gilesy_loo47375 жыл бұрын
troy barnhouse the title says it all ..HOW TO FIBERGLASS A SPEAKER BOX .....they are clearly here to learn how to do just that
@suicidetv20975 жыл бұрын
That's the main reason why I disliked it the main steps where not shown basically just showed how to frame it that's all
@ntoxic8edx4 жыл бұрын
Created alot more finish work by not adding more fiberglass from the inside 😂😂
@johnbrevard59663 жыл бұрын
too much yappin and not enough action
@jameshoward81333 жыл бұрын
Good video minus that shit music in the background.