Manitowoc ice machine not making ice

[@realestateservicessaleshea99]

I love when ice sheets fall,it's therapeutic. 😌 Thanks again for the videos. 🍺🍺🍺🥃🥃🎯🏌🏻‍♀️ Stay safe. Retired (werk'n)keyboard super tech. Wear your safety glasses!

[@twistedcandlecompany]

Another easy call for super tech Dave 👌 been subscribed to your channel for years. One of the best choices I've ever made😂

[@NorCal-refrigeration]

Thank you!

[@Eddy63]

The Iceman cometh ... Good one Super Dave ... Thx for posting ...

[@FlyEaglesFly19111]

Suuuuuupppppppppeeeeerrr tech. Glad you had an easy one. Pluggoooo buggooooo. Stay safe and be well Brother Dave.. Gooooooooooooo 9ers!

[@jimdefilippis9630]

cool video. Nice easy call~never worked on one like that with plate in the bin area. Maybe older one or for under the counter

[@atvtracks]

i have a adexa hzb-120f , and it goes to freeze and then defrost but the water pump does not move water to the top. i have installed a new pump, same problem.

[@IFIXCASTLES]

Nothing like a clean machine!

[@michaelratcliff1735]

Any kind of special brush used to scrub the grid witch and what kind of detergent do you use?

[@stephenb5757]

Can’t wait for my favorite super techs Hack and Moe tomorrow baby!

[@sherwinalvarez7365]

We charge 600 for an IM cleaning in NYC. Its out of line how far they let them go. Its basically reactive maintenance. Now you have to pay. Just spent 5hrs on a KM.

[@Nvision250]

hi there Dave, i really aprecciate your videos and hope you keep doing them because they are great, it would be nice if you could turn down a little bit the intro volume to your videos, it would be really nice when listening with headpones haha

[@vicenterivera69]

Nice work! And video! 💪👍💪👍 Cool vibe 🙂

[@bjsolo98]

Got that same ice machine and when its running it causes RFI on the 75 meter band, every 10khz... going to need a bigger toroid.

[@jeremiascastillo3983]

kool thanks a lot bro

[@murraychadwick9362]

Just got one for free. Now it's time to learn about them. When plugged in there is no sound at all from the compressor.

[@merardoreyes3020]

Bad compressor or start components

[@deucealmightee]

So the issue was the filter? My machine isnt making ice either. I bought it used, it worked before they unhooked it. I brought it to my shop on the trailer and its getting water properly, no ice thought

[@yourbrokerjamie9293]

Awesome video brother

[@sotirisgrig1406]

Hi bro from Aigio Hellas!Nice video!

[@shadman4325]

I have the same machine and it's making thicc sheets of ice. Thanks for this. I'm totally ice machine ignorant. Do you make your own cleaner? Can I use citric acid?

[@scottk0623]

Nice Dave, easy one for you. Weather looks great there. 18-24” of snow falling here 45 mph wind 17 degrees

[@NorCal-refrigeration]

Bundle up and wax the ski ⛷

[@scottk0623]

@@NorCal-refrigeration ME ski🤣🤣 that would be a great comedy video

[@boardbusterz9675]

board busterz repairs the manitowoc control boards. Takes us 1 day and it's a much cheaper option. Keep us in mind!

[@jamierushing8811]

Hi bro from west Alabama peace and love

[@MaxdOut305]

I moved the same machine location, one day after, now water doesn’t run and maintenance lights goes on when powering on. What could be the issue?

[@Genervidious]

I have this same machine in my shop and it's having problems and I can not get anyone to come fix it!! It's running water across the evaporator but it doesn't get cold enough to make ice. Any ideas where I should start?

[@NorCal-refrigeration]

Is the compressor and condenser fan coming on.

[@KelliHamlin-oc7ku]

Mine the water comes down then the grid gets hot? What is the problem?

[@residentialservicesplus.1049]

I like the video for sure.

[@Edgar-l8y2t]

What can be the cause when no water flows out the top new pump water tray full?

[@gene-khvacr]

Do you still use the powered toothbrush For the ice machine way quicker rite !

[@NorCal-refrigeration]

I puked on me. So I got brush heads that fit in drill. And small nylon brushes

[@brandonp185]

what kind of brush do you use to clean the evap plate

[@garywasthere]

I’m curious about that too.

[@ingisaacraulmaldonado1405]

Soy tu fan amigo espero algun dia conocerte en persona soy tecnico en refrigeracion ya mero ingeniero

[@goldhammer561]

Great content

[@MarcHord-mk5ff]

Damn, must be nice . I get slime and lime here in Indiana

[@dannynguyen8583]

dO YOU FIX AT PHILADELPHIA?

[@crandonwallace8355]

I worked on the same ice machine today. Mine had a bad harvest float. 0140 model

[@garywasthere]

What is was the bad harvest float causing? I’m new to ice machine repair.

[@MarcHord-mk5ff]

Do you have a brush to get in the grid with? A tooth brush doesn’t get in well.

[@NorCal-refrigeration]

I do there’s some nylon brushes on Amazon

[@MarcHord-mk5ff]

Come Dave, how about a link? Supertech

[@Okk030]

Going to hvac r school soon cool videos mon

[@NorCal-refrigeration]

Your entering a great carrier that will provide self worth as well as a good pay check.

[@mollyisc0017]

Manitowoc makes there Evaps in house not overseas, just came from there factory, just so you know.

[@kingofthecrease30]

most customers have no idea there is a filter down.there...every unit i work on has a plugged filter. another common problem with the neo under counter units is the hot gas valves are going bad...either stuck open or stuck closed....i replaced at least 8 of them over the last 3 months

[@NorCal-refrigeration]

Good heads up. Thanks

[@BlackHawkPSU]

kingofthecrease30 what issue(s) would the hot gas value problem cause? Thanks!

[@kingofthecrease30]

@@BlackHawkPSU if the valve gets stuck closed it will energize during harvest but wont open to allow the hot gas into the evaporator plate to harvest the ice off of it. If it gets stuck open the machine wont make ice in the freeze cycle and you may see steam coming from inside the bin because it will be circulating water over a hot evaporator plate.and the freon pressures will be almost equalized.

[@BlackHawkPSU]

@@kingofthecrease30 Thank you very much for the reply! I have issues with a Neo UY0140A-161B, 8 years old. The water trough fills with water normally, water then cascades down the evap to form a sheet of ice, and it starts to melt the ice and then the next thing you know... water starts running again over the evap and the sheet of ice is never ejected from the evap and a HUGE chunk of ice is then stuck on the evap. Happens on occasion. Fan cycle switch went bad and was bypassed. Parts replaced... new pump, new harvest and thickness floats, and control pad. Unit is immaculately clean inside as is the filter and condenser. Unit is level, control board is fine. Techs can't figure it out so I took it out of service and bought a new one. I still wish I could get this problem one working. It frustrates me as I took very good care of it.

[@garywasthere]

@@kingofthecrease30will it cause it to make ice intermittently? And cause the ice to become really warm at times?

[@curtisgrimes3020]

Where in NorCal you cover. I’m in Merced you cover down here?

[@NorCal-refrigeration]

I’m in Santa Cruz

[@curtisgrimes3020]

@@NorCal-refrigeration do you make it out to the valley? I’m in Merced. Got a manitowoc ice maker that froze over

[@NorCal-refrigeration]

@@curtisgrimes3020 it would be less expensive to find local repair.

[@curtisgrimes3020]

@@NorCal-refrigeration you have anyone down here you recommend?

[@gman115]

Love ur videos man hey is that panther beach at the end of video

[@NorCal-refrigeration]

Natural bridges

[@hvacperson8896]

what year would you classify an old and/or outdated ice maker?

[@NorCal-refrigeration]

Manufacturers say 10 years.

[@frankspliff7037]

Do you have Nor Cal gear store?

[@NorCal-refrigeration]

I don’t

[@NORCALFOR20]

Do you service in Atwater ca?

[@NorCal-refrigeration]

@@NORCALFOR20 no I’m in Santa Cruz

[@jonathantamayo1304]

I have the same machine and I have issues with it, water no freezing

[@FireandFrostHVAC]

I maintain a liquor store that has the identical machine, and yes they are sensitive to hard water deposits. The one I look after gets cleaned every three months + a new filter every year and it runs like a top. They are a great machine to work on, two screws at the top of the case, two screws behind the lower cover that you took off, remove the control cable from the motherboard and the drain line and the entire bin slides off the base. All of the mechanical is open and accessible.

[@NorCal-refrigeration]

That is a nice feature makes changing the fan cycle switch so easy. Great to see you in here🤘✨🤘

[@jasonshepherd6864]

Ever think about how much time is spent watching ice form and watching it melt?

[@NorCal-refrigeration]

As much as sitting at red lights

[@JamesBrown-db9pk]

lets all say a shout out st lav looks like he might get 2-3 fet of snow

[@NorCal-refrigeration]

Hell get to try out his snow ❄️ mover

[@danwittels5542]

Was that Tippy I saw on the job? ;-)

[@NorCal-refrigeration]

I love tippy

[@dannynguyen8583]

hOW CAN i MAKE A CALL?

[@duxburyrealestate]

Mine is brand new and water isnt running to the try .

[@harrydickson4575]

👍👍👍

[@NorCal-refrigeration]

🤘⚡️🤘✨✨🏈

[@stephwaylonwells3218]

👍

[@mikestevenson1819]

Dr Dave

[@JamesBrown-db9pk]

hey super t u having supr bowl party ill com over davyy

[@josecarlos8441]

My machine does not release water

[@abelmontoya2927]

Mice maker just runs water but don't make ice

[@steveblake8766]

344 thumbs up

[@shine-cg9uf]

💪🐕🥁☕🇺🇸👍🏈

[@shine-cg9uf]

Snow tomorrow morning n Saturday. Enjoy the beach ⛱

[@NorCal-refrigeration]

@@shine-cg9uf endless summer here probably mega drought this summer.

[@makeitcold6649]

Undercounter units suck

[@NorCal-refrigeration]

New ones are easy