RATES 🆚 EXPO? Difference Between Rates and Expo Explained

Confused about rates and expo? So was I! In this video I'll answer questions like; What are rates and expo? What's the difference? Why do they matter? and give you a visual demonstration of the difference between the two functions and show you how they work. (expo is short for exponential) This concept applies to both airplanes and quadcopters.
Tons more FLYSKY info here • FLYSKY Tutorials, Tips...
#FlySky #RCbeginner
Support RCwithAdam by purchasing through these links!
Amazon amzn.to/2FHjkwI
Banggood www.banggood.com/custlink/Kvm...
I have a website rcwithadam.com/
-------
RC with Adam GEAR
RADIO: amzn.to/2osIur0 www.banggood.com/custlink/3Kv...
QUAD RECEIVER: amzn.to/2CsvX0C www.banggood.com/custlink/v3v...
AIRPLANE RECEIVER: amzn.to/2OBIqnj www.banggood.com/custlink/GG3...
QUAD PROPS (my fav) amzn.to/2DywVXA www.banggood.com/custlink/GGK...
RC with Adam FILMING GEAR
Main camera amzn.to/2pGZA4L
Action Camera amzn.to/3dVW6DE
Mic amzn.to/2OKoCOB
Camera stand amzn.to/2C4I3uX
--------
Mandatory Disclaimer:
I participate in the Amazon Affiliates program, which means that if you click on one of the above Amazon links and purchase a product on Amazon, I will receive a teeny tiny commission (at no additional cost to you). Also, various other links listed here may be affiliate links, to which this disclaimer also applies.
*REMEMBER, always use caution and your best judgement when building and flying RC aircraft, be a good neighbor, and HAVE FUN!*
-----------
About RC with Adam: Adam makes FUN and HELPFUL videos about Radio Controlled aircraft, tech, and DIY projects! #RCwithAdam

[@johnk8825]

Simple ideas that are often hard for a beginner to grasp, until someone gives them a simple graphical view of what's happening. The setup may be slightly different on some radios but it doesn't matter which radio they use, the principle is the same. Well done Adam.

[@harryfahnestock8673]

Finally someone makes rate and expo understandable without the minutiae and complication!!! Thank you,

[@RCwithAdam1]

So glad I could help! Thanks for the feedback!

[@jumpstartfpv]

Rates = Agility (linear effect) Expo = sensitivity at stick location (exponential effect)

[@andreasglandorf5562]

As a beginner, this is a very good video to explain Rates/Expo. Thanks

[@RCwithAdam1]

Excellent! Glad to hear it!

[@Cosme422]

G-SUS! KRAIST! One of the best videos on the internet! No background music while explaining something! Thank God! and well explained! Thank you!

[@RCwithAdam1]

Glad it was helpful!

[@albaniansuperiorshqipetari8055]

Great Video , iv leared alot from your videos , GodMan

[@paulrawson327]

Great explanation! Thank you!

[@atulkumar6398]

These basic videos are sooo helpful

[@MrFester63]

Thanks! This is one of THE best instructional videos, PERIOD! 👍👍

[@GadgetLuv259]

Thank you! The visual was very helpful

[@RCwithSohel]

All doubts solved now Thank you for that demo

[@BrianW2979]

Great video with clear explanation

[@ronaldwitt2533]

Thank you....great learning experience

[@michalis5817]

Great explanation thanks!!

[@gwinyayimusuka914]

Best explanation ever thumbs up

[@LineAnimation]

One of the best explanation of rates & expo

[@RCwithAdam1]

Thank you!

[@cracker08121987]

This was brilliant!

[@ilhamismail2908]

Thank you very much, your video is very easy to understand

[@MindRiderFPV]

Very clear. Thanks!

[@sandeepkulkarni6046]

Best Demo !

[@teamblacksheep-]

Thanks for best explanation

[@javierc.salazar512]

Thank you so much for the info. Great job

[@RCwithAdam1]

Glad I could help!👍

[@curiouslife6014]

the best video for biginer

[@beefybeef1326]

Brilliantly explained

[@lemongorengpeng]

Agreed

[@federicosagun4615]

Im visual learner. Thanks hips brother.

[@stevefox7961]

thank you 😊

[@lmaoroflcopter]

Amazing explanation. I'm not flying any aeroplane but entering my first battlebot match soon and finding it so hard to actually point my bot in a specific direction, I keep wiggling side to side as it's almost impossible to drive in a straight line. Going to try messing with this and see if it helps! Think it should.

[@jerryk.155]

Hi Adam, great tutorial. Can you give me a favor and answer one question related to the FS-i6S? Is it possible to somehow set up a switch or other button to move the servo arm in one direction and when the button is released, the servo will return automatically to the center position?

[@mayankgautam1505]

Thanks 😍

[@WanderinWizard]

8:44 it’s also muscle memory too and feel.

[@skykalaicreations]

Hi bro. How are you?. This video will help me to understand the functions of TX basics. I already asked about the video of stick adjust in i6S. Then I want to know which editing software do you used bro?.

[@vietdragon5610]

Nice it work for Jet finally i can fly my

[@tecgeetech1304]

yes this helped thank you

[@hermannbose7347]

I´m using neg. Expo on one of my model sailboats with a tacking jib (The front sail wanders over from side to side, opposite of the wind) to get good feel on the ends, and be able to control the sail in and out smoothly and finely. The stick in center means the jib is held on the middle of the foredeck, wich I want to pass over quickly

[@MrKyle700]

this is cool lol

[@SteveKeeler]

are you familiar with the RL simulator. if so there is a setting in the physics area that allows you to set different percentages for flying. there is a physics speed setting that can be changed anything from 100% down to 20%. i have been playing with different settings and would like to know what an 80% setting would equate to in my transmitter. it slows the reaction of the plain down but what would be the rate or expo setting in my NX8

[@eiskorn12345]

What about Rates over 100%? Is that possible, considering the Servo has enough range of motion?

[@dhavesy5730]

Hi Adam,it's me again sorry. I'm updating my firmware a while ago but It wasn't able. It's getting stock on when I press the continue on firmware update?

[@leopoldomolina1763]

For quads, do i have to leave the rates 100% and Expo at 0% in the controller or it is override by the flight controller settings?

[@RCwithAdam1]

you don't HAVE to, but if you have multiple quads that's probably the easiest thing to do, so that you don't have to redo it for every model profile.

[@retardedguy9847]

Do you need to configure Rate and Expo both on Controller and beta flight?

[@RCwithAdam1]

No, just either one. For planes (without a flight controller board) you'll use the transmitter, and for drones you'll use betaflight.

[@nickrich710]

I have the radio Master TX 16S radio controller I brought the capaci Sinaloa 25 trying to get it to slow down not too good with betaflight configurator They said you can go with in beta flight configurator to slow your FPV down very confusing for me

[@mayankgautam1505]

Will I do this in fs-ct6b transmitter ?

[@RCwithAdam1]

Hi! No, I don't think this will work with the CT6B.

[@dhavesy5730]

Hi Adam,if I updated the firmware of my fs-i6s to 2020,would it still bind to older receivers like x6b or ia6b? Please help

[@RCwithAdam1]

Hi! Yes, for sure it will!

[@dhavesy5730]

Thanks for reply Adam,I'll try to update it on afternoon. My new x6b is coming tomorrow.

[@raresoupninja]

minus expo is for when ya over expo in beta flight ya can take it away easily in the field

[@MAX-vt9jv]

I thought Flysky negative expo loosened the sticks. Flysky i6x??

[@dunfielder]

It's definitely negative on i6x for softer stick

[@RCwithAdam1]

Hi guys! My i6X (firmware version: 1.0 01-Jul-2016) expo works in exactly the same way as the i6S. Positive expo for less sensitivity near the center stick.

[@bobahnjr]

Mine is also negative for softer stick

[@PC-by9xg]

I’m that person

[@hippo780]

negative expo is for guys who come on too strong when they meet a girl, they end up in the friend zone and crash

[@ricardotaveira7197]

bom vídeo obrigado.

[@WanderinWizard]

Great explanation vid thanks