Spektrum- Dual Rates and Expo How To

Got a great question from subscriber Zrbjgc about dual rates and expo- Hope this helps...
It was great timing since I just got this Eflite Timber....
To support my channel, check out my Amazon store: www.amazon.com/shop/7demo7?re...

[@peterfranks7619]

Even though I’m watching your video 4yrs after you posted I want to thank you for explaining very clearly what rates and expo means and how to program in transmitter.

[@7demo7review]

Glad to help!

[@w.j.bendellr.c.flying.1037]

You do a very good job on explaining duel rates and Expo on how it works. Very basic that’s what everybody needs to know. You have done it better than any of the videos that I’ve seen on KZbin. I’m going to save your video to share with the guys out at the club. ⭐️⭐️⭐️⭐️⭐️ THANK YOU.

[@turbonetic777]

This is such a great video, I’m back in the hobby and new to digital transmitter and this was so helpful!!!

[@BillKisel]

Just got my first programable TX (Specktrum NX8) and want to set rates and expo for my UMC Turbo Timber. This was just the tutorial I was looking for... gave me the info I needed without treating me like a dummy. Thanks.

[@jpeterman57]

Expo was the one thing I was trying to find out more on, i.e. what it does. Reduces stick sensitivity starting from the center position. Thanks Jeff!

[@7demo7review]

Glad it helped!

[@joec4506]

Best explanation of Dual Rates and Expo I've seen/heard.. Thank you

[@7demo7review]

Glad it was helpful!

[@tundo1101]

Excellent video ! Very helpful for a beginner. I could actually see what you were doing on the screen . Your explanations were great ! Best I have found . Thank you very much. U have a new sub. Can’t wait to see more of your vids. Your a natural teacher . Keep it up !

[@7demo7review]

Thanks for the kind words- I’ll be making some new videos about the FrSky X20s, great radios, and I can control all my spectrum airplanes with it

[@johntricozzi1777]

New to the hobby and loving everything about it. Your video was "excellent". I so needed that. Keep em coming..

[@samhozen4024]

Hi Jeff,great video,like how you explain that.I enjoy that very much.

[@crofty_flyer]

Possibly one of the best and easiest videos I've watched on RC planes! Only just getting into hobby and keep hearing about High and Low rates but just thought it was SAFE, also great how you showed the voice commands for each switch as I've been trying to set one for my flaps and gear so thank you 👍 I'll defo be subscribing

[@7demo7review]

Thanks for the kind words!!! I just posted a video on dynamic balancing of props

[@johngardner545]

Finally. .. an easy to understand tutorial on this topic, can't thank you enough. .. you're THE dude

[@7demo7review]

Glad it helped!

[@tomgutmann1609]

Thanks for the help really helped me out!

[@tlrcamp8009]

This helped me setup my spektrum DX6 thanks

[@bongyabes6058]

Simple and very clear tutorial! Such a great video. You got me subscribed!

[@7demo7review]

Thanks!! I plan to do more of these type videos

[@dreamcast1821]

This is a great Video, i managed to set up my Dual Rates and Expo no problem after watching this, i look forward to more Videos, thank you.

[@7demo7review]

Glad it helped!

[@stevestonrcguy5393]

Now it makes a lot more sense! Thanks, great video!👍👍👍

[@novamodelismo]

Thank you very well explained and very useful, Greetings from Querétaro México

[@scaneagle62]

The best explanation of how to yet. It helped me alot. I'm going flying right now.

[@7demo7review]

Glad it helped!

[@joevangorder6050]

Very good explanation I understand it much better! Thanks

[@markn3586]

Excellent video. Thank you.

[@chrisrobinson860]

Brilliant video as I am still fairly new to the hobby and duel rates and expo are still a bit of a mystery. However they were really well explained and made things much clearer. Thank you.

[@7demo7review]

Thanks for the positive comment!

[@cooperbrown1219]

EXACTLY what I needed help with! Thank you!! I have my maiden flight for my e-flite Extra 300 tomorrow morning. Thanks!!

[@7demo7review]

Glad it helped!

[@anthonyjones3345]

That was a really good video! Thanks

[@johnglenn4938]

Very nice explanation!

[@lambertodgr8]

I have a Futaba transmitter and it is far more complicated than any other transmitter I’ve ever used .

[@zachhall5852]

newer to the hobby, moving on to a trainer to a new plane and new transmitter.. didnt 100% understand expos and duel rates.. now i do!! great vid thanks

[@7demo7review]

Glad it helped

[@buckreynolds1779]

thank u for making the time for this video.

[@7demo7review]

My pleasure!

[@groggykerman007]

Thank you! Really helpful!!!

[@7demo7review]

Glad it helped!

[@xrbjgc]

JEFF, I wanna thank you so much for your video that you've sent me, It's really awesome. That's the first I saw my name in youtube and got me excited. I love your kids man specially your daughter Margo? Thanks also for the special bonus about the sound voice, no wonder why I don't the sound on my radio; I am doing it wrong. God Bless to all, Thanks again.

[@7demo7review]

Glad this helped- I figured you’re not the only one with this question. The rates will help tune on the fly, give you aerobatics with more throw or help with landings with lower throw... voice prompts are great because I forget which direction low and high rates are

[@xrbjgc]

@@7demo7review Jeff, I got my Conscendo today and I'm so excited, when I put it all together the wings and everything, but the throttle is not working at all. I've checked all my stick just don't have power at all. My batteries all charged up. I really don't have an idea. Could please help me one more time. Thanks Jeff.

[@deanedeane4318]

Awsum explanation and keep up your awesome content!!! Many thanks from all of us 😉😎

[@7demo7review]

Thanks so much for the positive comments- I need to make more videos like this. I just moved to a FrSky X20s Tandem radio and am loving it. Check them out

[@deanedeane4318]

@@7demo7review hi Jeff there's to many options......I have a collection of stuff but haven't made a decision as to what is going to be my main go to system..... still trying to understand the various protocols, open Tx mainly.... didn't grow up with PC etc so trying to understand.... My thoughts currently are to head towards radiolink ..... My brain hurts so sitting on the fence...... Hope you and family are well 😉😎

[@K1QS_Radio]

now I understand. thank you.

[@MrHughes500]

Really helpful video.

[@7demo7review]

Glad it was helpful!

[@MrZeek101]

i have both Conscendo gliders one of my favorites great demo

[@7demo7review]

I sold My Consendo,,,, I'd like to own another- just a solid motor glider~!

[@moonpaws1]

Thank you, thank you, thank you.....couldn't figure out a damn thing from the manual.

[@bartonfink5051]

So THATS what those settings are for... Thank You!!!!

[@7demo7review]

Yes.... It can fix a twitchy plane on the fly....

[@bradfordtownsend9698]

Your tutorial is very very helpful. Muchas Gracias

[@7demo7review]

you're welcome!

[@Joe_Zajac]

Excellent!!! Thanks

[@7demo7review]

You are welcome!

[@schwaboo]

Thanks this really helped

[@anthony3D]

Merci excellente vidéo 😊👍

[@drabberfrog]

Thank you! I thought the curve 0, 1 and 3 was talking about the different types of curves it could make outside the dual rate and exponential numbers, not that those were the names of the different curves themselves that have already been made. I was wondering why it kept changing both switch positions to the exact same curve lol

[@mickistevens4886]

Thanks! very helpfull

[@7demo7review]

Glad it helped!

[@user-vh7tn8bv8g]

Thank You🙏🏻

[@7demo7review]

You’re welcome 😊

[@deanwasielewski7768]

thanks jeff!!!!!

[@Reptielenfreak]

I know its been a long time sins the post but thanks anyway! Can you mix both setups ail and elev. on the same position switch?

[@garyvale8347]

if I choose to put all my control surfaces rates on a single switch, can I set up my high , med, and low rates and expo on the F- mode setting instead of using the duel rate setting ? ..thanks

[@colinmacneil3497]

Ok, so quick question...i just bought the spektrum dx6e, onve i bind it to my planes, do i have to set it up manually for thebeginner, intermediate and then expert switch ? Or does it automatically do it for me? This transmitter is a bit intimidating at first...lol

[@Mountian-Zen]

👍👍

[@jtepsr]

doesn't safe select accomplish the same as low rates? do you switch to high rates when on safe select?

[@7demo7review]

No, completely different

[@w.j.bendellr.c.flying.1037]

⭐️⭐️⭐️⭐️⭐️

[@jtepsr]

why didn't you set up the rudder. is it possible to do all surfaces on 1 switch. some of us only hav 6 ch radio

[@7demo7review]

Yes you can do rudder. I like to separate the 3 control surfaces but you could add all 3 to one switch. For landings I like elevator in high rates and ailerons on low rates

[@pcparlor]

Is there any particular reason you don't put aileron and elevator on the same switch?

[@7demo7review]

Yes, sometimes you’ll have a sensitive elevator but not ailerons- you can adjust each individually. For instance on almost all landings I’ll put my ailerons in low rates and my elevator in high rates

[@patrickhoyle8357]

Please can you explain the 'curve' option on the menu?

[@7demo7review]

I don’t think I’ve ever used that…

[@patrickhoyle8357]

@@7demo7review it appears to change as you change other stuff but you can change it yourself, thanks for your video it was good

[@mrbushpilot]

Why do dr and expo have two columns? As in both numbers shown twice next to each other

[@patrickhoyle8357]

Puzzles me too

[@FlightLogProductions]

Why not put Aileron and Elevator Dual rates on 1 switch?

[@7demo7review]

Because for landings I like less ailerons and more elevator

[@greglewis20]

Thanks for the info. It’s easier to start up a Boeing 777

[@7demo7review]

Ahh this is as simple as it gets!!

[@williamwallace9427]

Shouldnt it be called dual throw instead of dual rate since rate should refer to the rate of throw not the length of throw 😆

[@zestafpv427]

Flysky forever