DIFFICULT TRUCK FRAME REPAIR

✅ After the accident, a truck was brought in for repairs. As a result of the accident, the truck's frame was badly damaged. This car was brought from Novosibirsk. This suggests that a good master, wherever he is, is always in demand, and people are ready to spend time and money in order to get exactly to the master they trust.
In this video, I will show you, as a specialist, with extensive experience, repairs and straightens a damaged frame on a cargo berth.
Below I will leave contacts for communication with specialists in various types of freight transport repair.
Thank you all for watching. Special thanks to the channel subscribers.
Time codes:
00:00 channel splash screen
00:37 Preparation
02:20 Repair of the left side member
06:08 Repair of the right side member
24:08 End result
I share with you useful contacts:
✅ Repair of trucks and semi-trailers: +7 (916) -842-99-55
SITE: inforkom-trucks.ru/
✅ Shop of tools and equipment for service stations:
+ 7- (985) -700-09-09, inforkom-tools.ru/
✅ Sale of used and new spare parts, truck dismantling:
+7 (925) -000-21-11 (there is whatsapp)
inforkom-abcp.ru/ - online spare parts store.
✅ Cargo tow truck 24/7
+ 7- (985) -729-97-29 tel., Whatsapp, viber
✅ Diagnostics and repair of truck fuel systems
BOSCH or DELPHI + 7- (906) -642-74-76
/ bosch_inforkom
✅ Fuel cards Inforkom for individual entrepreneurs and legal entities.
7 tariffs, 5000 gas stations and the ability to refuel at a discount of up to 6% without service charges.
Detailed information: inforkom.ru/
✅ SITE of the Channel: razborgruz.ru/
✅ / razborgruz.ru - We are in INSTAGRAM
✅ / motors_truck Repair and Diagnostics of engines - in instagram
KZbin channel - MOTORS TRUCK
#truckrepair #truckrepair #framerepair
TRUCKS REPAIR
pakistani truck
engine repair
heavy trucks
truck crashes
cargo berth
frame straightening

[@trucks_channel_razborgruz]

✅ Ремонт грузовиков: [phone] ✅ Благодарность каналу / Thanks to the channel: www.donationalerts.com/r/razborgruz ✅ Реклама на канале: [e-mail] / [phone] Делюсь с вами полезными контактами: Подписчикам нашего канала большие скидки от наших друзей! ✅ Магазин инструментов и оборудования для СТО: [phone] , inforkom-tools.ru/ ✅ Продажа запчастей БУ и новых, разборка грузовиков: [phone] (есть whatsapp) Отправляют по всей России. Любые формы оплаты. 💳Топливный агрегатор - оптовые цены на АЗС. Оптовые цены на всех АЗС от -1 до - 4 р/л Без сервисных сборов, 6000 АЗС по РФ, 400 брендов партнёров и более 30 лет опыта. Подробнее: promo.inforkom.ru/?kzbin.infogaming/emoji/7ff574f2/emoji_u2705.pngkzbin.infogaming/emoji/7ff574f2/emoji_u2705.pngkzbin.infogaming/emoji/7ff574f2/emoji_u2705.png

[@zbigniewzylka7425]

pozdrawiam

[@user-mc9ul2qr7q]

Куда нибудь все равно потом утянет пытались но увы

[@user-sh2uc6hl7z]

@@zbigniewzylka7425 рошл ьтои9 □□6●《

[@silvanoalbuquerque2917]

Kkkkkkkkkkkkkkkkkkkkkkkk')kkkkkkk)>>>kkkkkkkkkkkkkkkkkk)>)kkkkkk)>>>kk>>>)kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk)kkkkkkkkkkkk)>)>>kkkkkkkkkkkkkkkkkkkkk))>))kkkkkkkkkkkkkkkkkk-_4

[@user-sx3kn9iz5j]

Дауш, до мастеров из Пакистана вам ещё ой как далеко

[@user-kk3vm7ti7g]

Сказать что я подофигел от увиденного это не чего не сказать. Это просто бомба.

[@user-pr8vk3fc7l]

Жестянщик красава. Большой и тяжелый труд.

[@trucks_channel_razborgruz]

Спасибо. Согласен с вами

[@user-cp2hq8uz7y]

Офигеть ребята, вы реальные спецы! Дай Бог вам всем здоровья и удачи

[@vvm1957]

Сложная очень тяжёлая работа. Мастер большой профессионал. Удачи в работе.

[@user-ds3ow9tu5z]

Сказать что молодец и мастер -как по мне так ничего не сказать. Вы большего заслуживаете ! Сам в правке не один десяток лет и что это за труд. и не только физический. очень хорошо понимаю Здоровья Вам.ясного ума и безграничного полета мысли . Нас мало - но мы в тельняшках ! Успехов и благодарных клиентов !

[@asdfg7651]

попал на это видео после просмотра ремонта рам пакистанскими мастерами посреди песка и ишачьего навоза. Боже. Как будто перенесся на 10 000 лет вперед ... в эру космических технологий. Люди в рабочей одежде, стапель, чистый гараж, современные инструменты, вместо элетрода рулетка и штангенциркуль. Перчатки, сварочная маска и рабочая одежда просто изюминка. Горжусь за наших работяг. Молодцы.

[@jM-qn9gw]

O Paquistão é o presente... Este vídeo veio do futuro!

[@user-yu5by7nb8r]

Чем гордиться? Херня это : Металл потерял прочность !!! А ставить усилитель - лишний вес ,возможно другие проблемы ... Лучше сразу собрать новую рамму !!!

[@yurdan100]

Работа просто загляденье, цех, инструменты, оснастки, а самое главное человек знает что делает. Респект!!!!

[@user-bs1hf3sk7u]

Modifying this chassis for trucks is my father's job and I inherited this job from him and he mastered it well. I have worked with it for 16 years. I assure you that this profession will only be acquired by experience and facing many different curves 😎😉 This artist really deserves appreciation for his mastery 🖒👏👏👏👏

[@teppotulppu1603]

This guy got skills, knows what he's doing and got right tools to do what needed. Great job and pleasure to watch!

[@edgardoamoros3042]

Yes sir, he understands bend points and angles, something not everyone possess, I enjoyed watching every minute. Outstanding work sir.

[@philwhite2806]

Got to love watching skilled craftsmen good job!

[@benedictomabute8849]

Indeed

[@Ilvir56]

Респект мужику такую работу проделать уважение

[@trucks_channel_razborgruz]

Спасибо

[@donaldoehl7690]

I've worked with metal for decades in various capacities and I think straightening a bent object is about the most satisfying task there is. Impressive work shown here, I enjoyed it.

[@roundedges2]

The most impressive was getting stretched metal--those kinks back down--with very litle heat

[@lyndenhovell7997]

The second most impressive thing about this repair, after the guys obvious skill is.......It looks like nearly every tool he used is "home made", repurposed, or otherwise modified to do what he needs it to do. Total respect here.

[@jessyjohnson6220]

He definitely knows his stuff

[@michaelcrowell5308]

Welding, blacksmithing, advanced pulling bodywork. All those different skills and how many man hours? How is this even worth it? Are there many places that would even attempt this?

[@juancastro9903]

@@michaelcrowell5308 hey good morning 😁 from Texas USA that Cain of repair you can find for 8k USA Bill's of one temple Texas USA

[@douglassteiskal9097]

@@michaelcrowell5308 k

[@atlasflame2510]

@@michaelcrowell5308 yes try to search and watch Pakistan truck

[@balu_gur9028]

Какая ж это трудоемкая работа... Тут и геометрия и физика в голове должна вертеться... Респект мужику

[@Kizimov]

да, только в голове своя физика, та что должна спасти кому-то жизнь, уже не сработает

[@user-bu1oz5ql8u]

kzbin.info/www/bejne/g3i8pqabbrx1fa8

[@tonydownunder5703]

Old school repairs 👍 The man is a master 👍 As a 63 year old and been a Panel Beater all my life started at 14 I really really appreciate the skills he has.

[@meysamsadeghi3332]

Where is the shop located??

[@harshabiliangady3211]

Extremely skillfully done. Lots of respect and good wishes from Bengaluru. God Bless You.

[@user-um8mi7vr2l]

Уважение за такую работу!

[@user-jl7ce2et8u]

большое уважение такому мастеру золотые руки

[@dmitrya7028]

Техничный спец, виртуозно даёт вторую жизнь детали. Шедевр.

[@blaireauchinois]

Extraordinaire !!!!! Cet homme a de l'or dans les mains 🙏🙏 Merci pour cette vidéo qui nous montre ce travail, y'en a pas beaucoup ! Continuez c'est très éducatif 👍👍

[@jering2338]

U are so pro! Respect from Malaysia🇲🇾👍👍👍👍

[@user-oh6oh7oe6t]

Вот это специалист,золотые руки, я вам скажу. Молодец. 5+

[@yevgeniypara2012]

Самый терпеливый муж! Спасибо, за видео! Профессиональная работа.!

[@garybrown6967]

A true craftsman and a pleasure to watch thanks for the opportunity to see your craft in motion you’re a magician mate,

[@user-dx1gl8mj2u]

Это не работа а просто произвидение искуства👍👍👍

[@trucks_channel_razborgruz]

✋🏽👍🏽

[@igorkozlovsky1977]

За работой мастера можно наблюдать не отрываясь.Сам всю жизнь в металлообработке.

[@rebelyank6361]

Amazing. I'm an American but the new American attitude that things can't be repaired disgusts me. The people of your shop are incredibly talented. I've been a mechanic for close to 40 years but never really got into the bodywork side though a close friend owns a body shop here. This work absolutely fascinates me.

[@charlescastillo8870]

I retired or should I say it retired me, being a body and frame man. And yes it's shameful the amount of waste we have in this industry due to the high cost of parts and materials, it's easier and cheaper to total an automobile than to pay a skilled craftsman.

[@arkadious9320]

its not an "new attitude" its just a fact based on science. typically you cant certify these trucks to be rated the same as they were prior to the repair.. trucking companies require insurance. . and these trucks cant be insured. No one is going to cover the chance that the frame snaps under a load that it was originally certified to handle and causes a accident / damage to property / loss of life.

[@Vladimir-yf7gh]

Не бит, не крашен! 👍👍👍

[@vito9135]

Самый лучший фильм за последние лет 5. Смотрел с открытым ртом на работу профессионалов. Браво парни!!! 👍👍👍🤝🤝🤝

[@DeTrOiTXX12]

A deep understanding of what metal likes to do in all kinds of stress situations, I bet it takes years and years to gain that skill set!

[@donalfinn4205]

Hats off to this man for his great skill!👍☘️

[@baritosbaritovich5658]

Превосходная работа,мужик спец с большой буквы.

[@adme_cad]

Дауш смотреть легко.👍👍👍👍👏👏👏👏🔥🔥🔥🔥

[@sidney7152]

It's not just about the equipment, it's about knowing how to use it, a very skilled opperator.

[@user-jt6jz9nu9d]

Мужик молодец 👍 знает свою работу. Здесь смело можно сказать - специалист своего дела. За такую работу нужно платить!

[@user-tp2ov1gd2t]

Это не работа, а зарабатывание денег. Выжать и продать. Данный кусок лонжерона рамы, с такой деформацией, для дальнейшей эксплуатации, должен быть заменён!!!

[@Lehyi]

@@user-tp2ov1gd2t а с чего вы это взяди, что заменён? Кто вы по образованию? Чем вы по жизни занимаетесь? Чем опасно, то что сделали? Где ошибки, для прочности и эластичности конструкции? На каком тайменге ошибка?

[@SVETOK1]

@@user-tp2ov1gd2t Ну да! Гнутое погнули еще раз и рады!

[@nonconformist3039]

Когда купишь такую машину как не бит не крашен. Тогда и будешь нахваливать.

[@azaeboomba]

@@user-tp2ov1gd2t абсолютно верно... металл потерял свою структуру и свойства. Это только для того чтобы обмануть и продать.

[@davidbauer7599]

Я очень впечатлен! Здесь работают абсолютные профессионалы! Привет из Германии!

[@user-lk5ng4km7j]

Ролики с эвакуацией понравились?

[@user-gq5ck7iv6s]

я скажу так...это просто залипательное видео....

[@GuyRWood]

I think straightening that frame is one of the most impressive things I've ever seen 😯.

[@Matty.Hill_87]

I'd have taken one look and called that scrap, this guy made fixing it look easy 🤣🤣

[@nathanpaterson8506]

Yep he’s an artist

[@allangibson2408]

Extracting the driver from that truck was probably harder…

[@schsch2390]

For a more primitive approach check out Pakistani Truck....

[@Matty.Hill_87]

@@schsch2390 what those guys do is crazy

[@jerryglen986]

Nobody in the U.S. would repair a frame so badly damaged. They would buy new frame components and reassemble. It's because our laws wouldn't allow this repair. Awesome work👍

[@belomolnar2128]

You are true. The residual stress could break the structure.

[@connyeriksson1912]

Same in sweden nobody would allow that frame back on the road again But nice Job anyway nice skillz

[@thomaswayneward]

What laws?

[@dietersattler7462]

@@myvideos56 My thought exactly. All the tensile strength is lost with the bending and heating. Unless they have a way of heat treating the assembly, I too would not trust it. Amazing craftmanship though.

[@kaba_me]

​@@connyeriksson1912 This repair would be fine both in the US and Sweden. Uneconomical and dangerous are different things. If it passes the crack inspection it's good to use.

[@AlekseyVladimirovich88]

Количество одного инструмента просто обалдеть!!!Решил же человек это сделать и этим заниматься!!!

[@user-kr8uu9so1p]

Это очень прибыльное дело. У нас в городе только одна фирма занимается правкой рам и кузовов и очередь на месяцы расписана. Едут со всей области.

[@user-ng4yq3uz8t]

@@user-kr8uu9so1p а от куда Вы?

[@paulhardy9755]

what joy to watch a craftsman at work, and working alone

[@user-ot4nz4lf9k]

Мастеру респект!!!

[@spicamaster]

Второе видео смотрю с этим мастером - удивляюсь как он это делает 👍🏽👍🏽👍🏽

[@user-yv2uq4si2p]

Если есть чего делать и оборудования

[@Alexdrummer09]

Руками

[@VIEVIS61]

Посмотри /pakistan triuck

[@user-ii4xk1ip7y]

Руками пришитыми к мозгам.

[@Vyacheslav24reg]

Глаза боятся, а руки делают!👍

[@richardford4570]

Pay the man more money he is a genius. Great job and video.cheers from Australia

[@user-mb4fx5ei6v]

Нет слов, работа большая, это не кувалдой стучать, где надо поднагрел выправил, нагретые места охладил, не дал металлу остыть естественным способом, тогда бы он уже был бы мягкий как пластилин, отпущенный, человек с опытом, а сколько всяких инструментов,пневмо гидро оборудования, приспособлений, цепей, трещеток, стапель это сколько денег, времени, значит востребованных, да это вам не пакестан трак, кувалдой махать, да струбцинами сжимать, хорошая работа, хороший специалист, удачи вам и здоровья.

[@user-land-cruuser]

Крутость мастера просто зашкаливает! Вот они золотые руки и профессионализм в своём деле! Однозначно лайк

[@trucks_channel_razborgruz]

Благодарим вас

[@user-hf1kn6dm9t]

Вопрос только, что на выходе? И кто-то купит гемор. На нем теперь вату возить.

[@user-hf1kn6dm9t]

Но мастеру уважуха.

[@charlescoulson]

Hats off to these guys who perform an operation that most in the Western World would not even bother with. Great job..

[@trucks_channel_razborgruz]

Thank you friend

[@enverbozkurt4647]

Gerçekten çok zor bir meslek.Isinizi severek yaptığınız belli oluyor.Kolay gelsin iyi çalışmalar. 👏👏👏👍🇹🇷🇹🇷🇹🇷

[@frankschroth1919]

Wow, you Russians are some tough workers!!! That's back braking /heavy work!!! Great job guys!!

[@caleblyftogt1029]

Good to see someone who has the skills to rebuild something like that. Unfortunately with the throw away society that is becoming more prevalent, people with your skills are harder to find these days. Keep it up, thanks for sharing with us.

[@cluckhead1913]

Labor rates are cheap enough in Russia where it makes economic sense to to perform such repairs. In the states, labor is 4X the rate so the truck is scrapped. You could save money hand over fist by shipping your truck here from the U.S. to be worked on even after paying the necessary customs official's bribes.

[@berndheiden7630]

@@cluckhead1913 You are right. It is a balance of cost for replacement parts against the cost of tools (which are a lifetime investment) and labour. In some countries one is more economical, in others the other. And don‘t forget legal codes are immensly different. In other countries this work of art would not pass inspection no matter what. As for saving the parts (as I have seen above in comments) metal has the phantastic property that it is not thrown away, it is simply melted and will come back another day in another form. But that costs money too, so the decision lies with the bookkeeper!

[@leopoldoayala4166]

Como decimos en México: Ese señor que enderezó ese bastidor, *es todo un señorón, un gran maestro en el arte de enderezar los bastidores de camiones y dejarlos como si nada les hubiera pasado !!!*

[@markwoods3071]

The man is a genius, absolutely incredible skills. What a worksop, what a jig. Incredible

[@user-ii8um3gh5t]

Первый раз смотрю но удивляюсь вот это да красавцы есть на земле русской умельцы

[@crabapple1951]

This man is an amazing artist. This was a very complicated job. Lots of patience was needed by your worker. He really knew his work.

[@user-kn6nx9et9y]

熟練の技術で感動しました。これからも「頑張って」ください。日本より応援しています。

[@VIKTOR57201]

Снимаю шляпу. Перед такими мастерами.

[@richgo6639]

Good job I never thought this truck chassis get straighten out in 25 minutes 😍

[@skathvn3913]

Мужик молодчик, раму выправил! Страшно представить, какое ДТП было раз так раму скрутило!!

[@user-mq9eg9pc4i]

У нас пенсионер на новом КАМАЗе зерновозе кузов не расштопорил и поднимал пока раму не вывернул. Видимо нет защита от дурака.

[@skathvn3913]

@@user-mq9eg9pc4i может быть не спорю!!

[@Safaricom_]

Mechanic of the year, you deserve a world recognition

[@everythingman2154]

очень хорошая работа уважение со стороны Мексики🇲🇽 I work with small frames and enjoyed watching that man getting the job done. Привет из Мехико🇲🇽🇲🇽🇲🇽

[@skipolabc9946]

Saya dari Malaysia,saya suka video truck repair,penuh dengan kesabaran dan ketelitian.. tahniah saya ucapkan

[@trucks_channel_razborgruz]

terima kasih rakan

[@sergek2172]

мастер -- красавчик!

[@trucks_channel_razborgruz]

Спасибо

[@mortimerschnerd3846]

The only way to appreciate the wonderful skill this chap has is to have tried to do a similar job yourself!!!! Absolutely marvelous!!!

[@Lets.stop.oil.protesters]

It's like watching an artist paint. That man does one hell of a job

[@frankgriffin1121]

All I can say is. What a craftsman !!

[@user-gw3dx8fx5r]

Я представляю, что с его руками в конце смены... Вот так работают настоящие мужики! Как тебе такое, Илон Маск?!😄

[@MrBlaser51]

What a MASTER is so right !! Incredible.

[@even1007]

Отличная технология. Я люблю эту рабочую среду, это мой рай.

[@Golichenkov-up7cz]

Интересная работа одного человека, мастера своего дела!

[@gb4408]

Mate I'm so impressed with your acquired knowledge and skill set. I'm a trades person and I was mesmerised from start to finnish. Every adjustment you applied to that chassis i couldn't wait to see what the next would have. I thought that chassis was unsalvagable. Your a great technician man.

[@Frankiedoodle1941]

OMG This Guy is worth his weight in Gold, I have never in all my Life seen a Guy with so much dedidcation to His work and being an Ex Trucker myself I would feel as safe as houses driving a Vehicle repaired by Him, his knowlage is beyond reproach

[@trucks_channel_razborgruz]

Thank you very much. Greetings from Russia. Best wishes to you

[@michaelcrowell5308]

Had to be at least 40 very skilled man hours here. Worth his weight in gold is right. I’m surprised he didn’t have kids doing the heavy lifting for him.

[@MuhammadQasim-nl8jj]

The taste of Hammmer and Cold Chisel is better. You are too hard worker , Respect from Pakistan

[@saeidkharrat4397]

THIS GUY IS REALLY A MASTER

[@jaimecaceres1621]

Браво! Умный и мудрый человек.

[@user-iq9kw8bx8w]

Видео огонь🔥👍👌 спасибо за съёмку 🤝👍👌✊🤗

[@trucks_channel_razborgruz]

Рад стараться)

[@juantorrestorres5479]

Excelente trabajo. Un especialista de los pocos. Felicidades👍

[@trplpwr1038]

A young apprentice should be working with this guy, very impressive set of skills.

[@trucks_channel_razborgruz]

I agree - he must fart his experience before retirement)

[@jenniferwhitewolf3784]

The floor is amazing! Every big equipment shop needs a floor like that for hard point mounting.. Clever.

[@allanharris4492]

Again a master piece, that is a gifted man. Well done sir.

[@trucks_channel_razborgruz]

Thank you

[@timmayer8723]

This man does not get paid enough, whatever the amount. This is a HELL of a lot of hard work. He also has a lot of money tied up in equipment and experience. I am impressed.

[@MrPletnyov]

на коленке получить такой результат дорогого стоит!

[@maickcarpento7492]

Excelente trabajo me imagino que no hay muchos enderezadores como usted maestro 👍 es un arduo trabajo de muchos días con mucha dedicación sobre todo esa pasión por su trabajo con honestidad me hubiese gustado ver dos ayudantes trabajando junto a usted era mucho daño y con su equipo y herramientas seria para usted más descansado no se si en su país se carece de ayudantes o no se si es como américa latina que en todos los talleres de aquí hay de dos o tres ayudantes pero de todas formas es usted un profesional un buen maestro 🤝🤝💪💪👌👌👌👌👌

[@franciscowashington2155]

Beleza muito bom 👍👍👍

[@trucks_channel_razborgruz]

Obrigado amigo!

[@titivmax1]

bravo super travail de ce ouvrier hyper qualifié cela fait plaisir de voir ce cirurgien redonner vie au squelette broyé de ce camion .bonne continuation a vous et que l année 2022 vous soit prospere

[@user-go1nh3cl9h]

A professional in his field. Respect.

[@vovagurinenko2704]

Специалист своего дела, респект.

[@garymucher9590]

Absolutely amazing that such a totaled heavy truck frame can be reshaped and used again. A skill that not everyone could do. Thumbs Up!

[@340oleg]

Офигенный мастер. Я бы пошёл к нему в ученики

[@trucks_channel_razborgruz]

Вероятно, это возможно. Нужно общаться

[@saeidkharrat4397]

HE DID EFFIN AMAZING JOB

[@calinsandor9518]

I'm impressed. That guy is a true craftsman. Congratulations !

[@trucks_channel_razborgruz]

Thank you for your nice comment. We are very pleased. Further on the channel there will be many more interesting videos. Greetings from Russia. I wish you good luck and health

[@Lauritende]

Parabéns! Isso não é trabalho, e sim ARTE.

[@ozairapolinario8222]

Verdade amigo

[@elizeteelizete5816]

Boa noite. Tambem sou alinhador de chassis de caminhão em São Paulo e realmente é um servico muito pesado mas tambem é pura técnica, infelizmente somos poucos na profissão.

[@killerkane1957]

What a Badass this Man is!!

[@purwoerdiantoro1245]

This guy is professional and for only professional job...👍👍👍

[@killerkane1957]

Outstanding repair! This man knows his work and goes the extra mile. Very impressive. TEXAS

[@muradqadir550]

Thank you very much for the best ever repair of the truck frame I hope you do more video please. Thank you very much again

[@trucks_channel_razborgruz]

Thank you for watching our channel. We are very pleased. Further on the channel there will be many more interesting videos. Stay with us. Greetings from Russia. I wish you good luck and health

[@wesleyeeckhoudt4344]

Next Gen , with old school tools . He is a real MetalMaster !!!!

[@user-px1lz8df4r]

Мастерство старой школы. Ну и достаточно неплохо оснащенный напольный стенд. Лайе однозначно

[@davidjenkins1958]

I hope,this man is well compensated for his work, here in the Us that truck would have been totaled, or both frame rails replaced. Fantastic work sir. Dave from U.S

[@717Fang]

@@MEXAHIK. Собралисъ в Штаты?

[@717Fang]

@@MEXAHIK. в Америке механики не занимаются ремонтом шасси это другая профессия / collision and body repair/

[@717Fang]

@@MEXAHIK. да

[@717Fang]

@@MEXAHIK. моя детская мечта была житъ в США и теперъ I live in the country # 1

[@717Fang]

@@MEXAHIK. Русский с Казахстана

[@chrisdidomizio4958]

He certainly has the nice tools. Love that mini mag drill and induction machine. First industrial size one I've seen.

[@alexdolcanin7172]

Мужик просто красава знает что делает