Thanks for this video. My Molten Special Edition just finally started giving me double click issues about a week ago after using it for TWELVE years with no issues. Such a great mouse, glad it's not too hard to fix.
@Killjoy3574 ай бұрын
Wow I'm impressed to see someone else that is willing to go through all this work to restore an old gaming mouse they like. Thought I was the only one who loved their mouse this much. Mine was the second one you showed(gen 2) and I refuse to let it die. Thank you.
@frothyground70753 ай бұрын
Me too. Ordering some switches now any recommendations? First time doing a mouse repair the old nagas are to good compared to the chroma and layer series. They feel and are cheap comparatively.
@Trigenetic4 күн бұрын
i dont remember when i bought my Naga but its been with me for a long time! Just changed the switches and it feels like new! I've had an issue that when i bring it on vacation and its not plugged in it wont work for a while so i guess the traces are not 100% anymore but i hope it will last for many years to come. love it!
@PunkNDisorderlyGamer3 күн бұрын
Do you have a wireless mouse or wired? You might need a new battery or to replace the cable, depending on which type you have.
@Evelisk10 ай бұрын
Great video. Wish razer would make nagas with this shape again. Been using my naga molten since 2011 and it could use some work. Can't find replacement scroll wheels anymore.
@AdobePro19938 ай бұрын
If you dont feel like taking the whole mouse apart you can get away with taking the shell apart with just the 4 screws and then once you have access to the switches just blast them with contact cleaner while pressing the switches with a small tool. I dont have the switches on hand but this took me less than 5 minutes and the double click problem went away completely. If it happens again i will probably replace the switch but i wouldnt be surprised if this fix lasts me a while, they just need to be cleaned most of the time. Btw i used bw100 contact cleaner but im sure most contact cleaner will work the same.
@ItachiRyu Жыл бұрын
happy to see you uploading again even if only a bit. looking forward to the next one. NJ Gang lol
@mitchellchangs11 ай бұрын
Small tip for anyone who’s soldering their new switches on, make sure the both right mouse and left mouse switches sit flush against the logic board, if either of the two are raised slightly it will cause issues once the mouse is back together
@Steveburto2 жыл бұрын
I bought a Naga back when it came out thinking the side buttons would be of use for weapon change. I ended up not really using them. Once the left click started messing up I gave it to a friend who had like HP junk and told him to just blow in it. Today I run a g900 by logitech, the wirelessness is top notch imo. Also in B4 "bro change your smoke alarm battery" comments pile up.
@PunkNDisorderlyGamer2 жыл бұрын
I played a lot of WOW back when I bought it, it was a must. The alarm, I have to change it.
@eldrewski16925 ай бұрын
This worked perfectly for me. Great video!
@MegaPuggz Жыл бұрын
Hey great video, but it would be helpful if u put links to purchase the switches and mouse feet
@MikaelJSK9 ай бұрын
ty for the video! just replaced left click switch to my trinity.. i took switch from my older naga and it seems to work nicely now! so it works even with different component.
@stridervanmeter84092 жыл бұрын
hey not bad! i just did this mod on my m720 that started double clicking. Its crazy that they can't just design circuits that don;t wear out these switches as fast
@PunkNDisorderlyGamer2 жыл бұрын
They’re rated for millions of clicks, but I’m sure they don’t last that long. After all, it’s a small mechanism (moving part) that fails.
@atheos5748 Жыл бұрын
The second generation naga epic is my favourite mouse of all time. Sadly I dont have the skills to fix the double click issue on my own.
@arthurd15915 күн бұрын
@PunkNDisorderlyGamer Thx a lot for this video. I can't find the proper switch for the left and right button. Could you tell me where did you buy it, or what type is it ? Thx :)
@PunkNDisorderlyGamer5 күн бұрын
@@arthurd1591 I genuinely don’t remember. Try typing in your mouse’s model number and micro switch it should yield some results. I think razor used Omron brand switches but I could be wrong.
@Norrecito2 жыл бұрын
Such a nice mouse! I have a Razer Basilisk X Hyperspeed with the same double click issue. Maybe one day I will replace the switch in that one. So disappointed that the issue started after 2 years of usage. I haven't came across one of these in flee markets, however I have bought a Razer BlackWidow Chroma v2 keyboard for ~12 dollars which had its cable cut. It came with the everything in the box (even the cut cable), like it was never used. Still wondering why it had a cut cable. Ordered a new cable, replaced it and using it for work since. Looks gorgeous :)
@PunkNDisorderlyGamer2 жыл бұрын
Cut cables are easy fixes too. I’m glad it worked out.
@carson544446 ай бұрын
Could you please link the mouse foot? I would like to attempt this on my old naga molten
@TyMcLeod9 ай бұрын
The screws are not wanting to come out. Any suggestions? I might have stripped one.
@colbybabb772 ай бұрын
I am about to replace the switches for a Razer Naga 2012 and a Razer Naga Molten. I would like to go ahead and replace the wheel encoder and button while I'm in both of these. Where to you find the proper part numbers to buy for these? Thanks!
@PunkNDisorderlyGamer2 ай бұрын
I ordered these parts like 10 years ago, to be honest I think I googled the make and model of the mice and got a parts list somewhere. I’m sorry I don’t remember.
@colbybabb772 ай бұрын
@@PunkNDisorderlyGamer No worries! Thanks!
@poppysilver2 жыл бұрын
I have had a bunch of replacement Razer Deathadders over the years, all the switches seem to be hit or miss.
@PunkNDisorderlyGamer2 жыл бұрын
Get yourself some microswitches and replace them good as new. The early Razer stuff is top notch nowadays probably not so much. Death-Adder is the standard mouse designed one. I remember my mom picked up one at CompUSA when they were liquidating for bankruptcy for like $10.
@guillaumetartempion144 Жыл бұрын
What are you referring as double click issues ? My mouse has some ghost click issues, (click even if I don't press the button), is it the same ? Where did you find the reference of the switch and where did you buy it (my deathadder elite may require a different switch) ?
@PunkNDisorderlyGamer Жыл бұрын
Double click is when you press the button once and it registers 2 clicks. Often times very irritating for drag and drop or other actions. I don’t remember where I got the reference for the switch, I did this repair too long ago. What I would suggest is looking up your mouse model and see if there is a switch listed. I bought these switches off Amazon or eBay I don’t really remember.
@Dropla Жыл бұрын
Great video! I fixed my double click, however, I messed something up putting it back, it now won't track at all? any ideas? I noticed there is no longer a light at the bottom, I think there was before? I'm not sure what I did wrong, I opened it up again and it looks like everything is in the right place, I cleaned everything? I'm not sure what to do, it's acting like i'm not moving the mouse at all, everything else works fine. I've been using this mouse since I bought it when it came out, the lava edition & I can't use anything else, they are all to big, no idea why they changed the design lol. Anyway, any suggestions would be great. I looked online, but, people keep suggesting calibration & that didn't work.
@PunkNDisorderlyGamer Жыл бұрын
Check to see if the white plug is seated properly, perhaps you pulled the plug out and damaged the cable, the one with the USB plug. I had a mouse a long time ago that was intermittent (it would occasionally disconnect), it had a broken plug and would only work if you crimped a certain place in the wire. You may also need to replace the usb wire. Does the mouse connect to the computer at all?
@Dropla Жыл бұрын
@@PunkNDisorderlyGamer I took it apart again & reconnected everything & it's all working great! I also had noticed there was a little spot on the opposite side of the laser eye that had a smudge of residue of some flux that must have touched it after I had wiped it, so I wiped that away too. I'm just so happy it's all working again! Thanks so much!!
@PunkNDisorderlyGamer Жыл бұрын
@@Dropla Congrats, I’m glad you figured it out. It’s quite satisfying solving a problem.
@Dropla Жыл бұрын
@@PunkNDisorderlyGamer Well, with your help I did lol~ many thanks!!
@lucienguimaraes9557 Жыл бұрын
I currently have the double click issue on my original Naga and I would like to keep it instead of buying the newest version. But I couldn't find the replacement parts needed. Where did you find them? Thanks for your video!
@PunkNDisorderlyGamer Жыл бұрын
The switch can be found on eBay or Amazon in packs of 5 or more relatively cheap. The part number is “D2FC-F-7N”.
@lucienguimaraes9557 Жыл бұрын
@@PunkNDisorderlyGamer Thanks for your quick reply!
@PunkNDisorderlyGamer Жыл бұрын
@@lucienguimaraes9557 you got it 👍
@lucienguimaraes9557 Жыл бұрын
@@PunkNDisorderlyGamer Hey man, I just finished fixing my Razer Naga. So happy to be able to use it again for the next years thanks to you!
@mahid959410 ай бұрын
Once I do this, do I have to replace this a bunch of times as well or just the one time?
@madmax2069 Жыл бұрын
I have a Logitech g203 that's double clicking. I'm going to be doing this sometime soon.
@PunkNDisorderlyGamer Жыл бұрын
Yeah it should be straight forward.
@madmax2069 Жыл бұрын
@@PunkNDisorderlyGamer 5:06 oof, goo gone definitely doesn't like labels, I'd rather use IPA or Windex. And sometimes those are a bit too harsh.
@ThomasCripe-jg7lu Жыл бұрын
i have the left handed razer naga i would love to have someone restore it
@Majorite Жыл бұрын
My middle click broke :(
@Majorite Жыл бұрын
I think the sensor for it broke or somethin.
@OuDayas2 ай бұрын
Useless, razer is the worst, trust me, I dont remember how many mail i sent trying to get my razer naga trinity fixed, but they didn't care, idk the problem, i even wanted to pay an extra for repair my mouse (mine is out of warranty) but still nothing, idk what to say, if i had to waste my money i would rather burn money instead of giving to a chimp company from calabria
@Krankelgrink2 ай бұрын
Well I've used my Razer naga(like the one in the video) since 2013 and only now i have to replace/clean the click modules, so I dont know about trusting you on that one. I understand that you're having a frustrating situation, try see if anyone you know might be able to fix it for a reward or try call some repairshops(shops that repaires phones might be interested).
@Serpicoitalia2 жыл бұрын
hi Daisuke, I prefer videos when you repair consoles, do you have a facebook or instagram page?
@PunkNDisorderlyGamer2 жыл бұрын
Next video may be a console repair, it’s one that has been giving me trouble. No I don’t have FB or Instagram, I have Reddit it’s in the description.
@PunkNDisorderlyGamer2 жыл бұрын
Also, in the last second of the video, in the background you can just barely make out the box to my Lupin the 3rd board game.
@Serpicoitalia2 жыл бұрын
@@PunkNDisorderlyGamer I hadn't seen him, now yes 😁
@Serpicoitalia2 жыл бұрын
@@PunkNDisorderlyGamer i have no idea what a reddit is, you should make a facebook or instagram page