Razer viper mini / Razer mouse sensor fix

[@kawelfragatach8319]

DUUUDE, you saved my basilisk X hyperspeed, I scraped the connection with a sharp screw I had lying around and it worked!!

[@bacon_man21]

I thought my viper mini was done for after 2 years, Thank random guy on youtube.

[@dumboz6693]

What connection are you talking about?

[@HRZ_12]

got a problem with my viper mini too sometimes when i flick my mouse it instantly disconnecting for a brief moment. cleaned the sensor and also i tried to play fps with it for 30 mins no disconnecting anymore. hopefully it stays like this

[@glashxx-xxglashxx_xx5126]

did you fix it?

[@HRZ_12]

@@glashxx-xxglashxx_xx5126 nope it happens again after a week

[@sangtranquan8791]

@@HRZ_12 have you fix it ? may i ask how ?

[@yesnonoyessir]

I have a black tape like thing on my sensor and chip should I remove it It has a lot of dust

[@HRZ_12]

@@sangtranquan8791 nahh i just bought a new one. im planning to change the cable tho with an aftermarket one to see if thats the problem

[@emiyakiritsugu6329]

couldn't you specify or mark the area that needs to be cleaned? I didn't get where to clean when you pointed with your fingers

[@AidanSidebottom]

But late but it's the metal contacts leading to the led

[@alejandroulloacazorla9023]

could u do a vid showing how you cleaned the contacts, i tried doing it but it still doesnt work, all works fine but the sensor

[@pixondu6833]

For me too

[@ravimaurya2237]

Use petrol and then brush it ​@@pixondu6833

[@slaw1448]

having the same issue but cleaning didnt work. It's particularly strange because for the past few days it was randomly working and would always cease to work after PC shut down. Pretty sure I need a new mice then.

[@AidanSidebottom]

Try bending the box enclosing the light upwards, the solder may not be contacting

[@A1ex.sw.09]

Try deleting razer viper mini drivers

[@Gaolpost]

my friend it works to me but it giting again what should i do ? @@AidanSidebottom

[@Gaolpost]

like if i bend the box upward it start working but after while it get the some problem @@AidanSidebottom

[@vinceelpedez362]

@@A1ex.sw.09 does this works?

[@filipequeiroz6013]

in my case, when i move to the left or up, my cursor goes to the extremity left or top side (respectively) instantly. no problem moving exclusively to the right or down, just left and up. do you have any idea on why this is happening? also, i wonder if dissembling could mess up with the warranty policies (not sure if i still can try to get a new one from Razer but yk)

[@AidanSidebottom]

In terms of your issue I'm not sure how to fix that. you can disassemble the mouse and put it back together without changing anything about it so i don't see you having any problems with a warranty

[@jordananderson5980]

i have the same exact issue but after a while the mouse sensor stops working completely. buttons still work fine like in the vid

[@filipequeiroz6013]

@@jordananderson5980 bro, in my case it suddenly came back to normal, but i feel like the sensor could fail again any time soon. i hope you can fix your problem tho. reach redragon's support

[@Mani-tx9zp]

same problem but at a extreme level even if i flinch a little gets teleports to top left corner or top . and than sometimes it starts working like nothing happened only for it to go back to this state the next day... and now as of typing this the sensor completely stopped working than i dissembled it like this video said so... just by doing that it started working again i cleaned it, still working than after a while it started teleporting like crazy again. as of now the sensor has completely stopped working... idk wht to do with thing

[@filipequeiroz6013]

@@Mani-tx9zp exactly same thing here, mate. exactly how you described. it's probably the sensor, then. i don't think our mouse's issue has any solution haha. if you like the shape of that mouse, you should go for the wireless DELUX M800, i've only heard good things about it. good luck!

[@jhonyobregon9502]

Friend, could you specify which connection should be deleted?

[@AidanSidebottom]

No connection needs to be removed, just ensure that there is no contact between the two larger connections to the light diode

[@Vexcenot]

bro gotta brush that mousepad too

[@rodrigov7422]

Do you know the model or specification of the infrared light?

[@baohoang5197]

my viper mini still clicks wouldn't move as well although the sensor is still on. but it seems to flicker though. I have tried reinstalling drivers and cleaning sensors but doesn't seem to work.

[@nnot_highground3960]

mine, it's work for 2 minutes and back to jumping to corner

[@IsrarZarif]

​@@nnot_highground3960any fix?

[@blackthief111]

@@nnot_highground3960u have the input delay from regedit to too low trust me keep it to 20-35

[@bakednotfriedisdead]

@@blackthief111 whats the reg key and the path

[@blackthief111]

@@bakednotfriedisdead i forgot just google how to reduce mouse clicking delay on youtube

[@agneeshwar_]

Is it okay to permanently remove the black film sticker covering the sensor and IR led, and use the mouse without it? Is there any crucial function of the film?

[@Monsieurrubio]

U can remove it. It just blocks the ir sensor's light to escape

[@seifislam1263]

I have the same problem i cannot see an light ; i have already disassembled it and cleaned it but still no porgress . all buttons works but the sensor does not

[@AidanSidebottom]

If you can't get the light to light up you likely have a dead mouse

[@johnmark2228]

i have the same problem, all buttons work but the sensor doesnt, i will try this method and come back if it works..

[@jhonyobregon9502]

funciona?

[@johnmark2228]

@@jhonyobregon9502 sometimes it does sometimes it dont/ also i have fully cleaned the mouse still doesnt work properly

[@jhonyobregon9502]

@@johnmark2228 friend, which connection did you remove for the sensor to work?

[@johnmark2228]

@@jhonyobregon9502 i didnt remove any connection, i just remove the screws and then clean the mouse. in the sensor area clean it with a soft small brush

[@BatiesMR]

My razer Naga has this issue where when i restart my computer the Sensor light doesn't turn on, but after a long time it turns on and it works fine. If i never shut down my computer it works perfectly fine. (i bought my mouse 10days ago) Im not sure if this would fix it? I've just had this issue again this morning and kept searching about it, even deleted drivers etc. Was that your issue, the sensor light wouldn't be on when you look bellow the mouse?

[@Monsieurrubio]

Same issue with me before and now in present. My mice died 😂😂

[@BatiesMR]

I replaced my mice like 2 weeks after i bought it, got another one and its working well.@@Monsieurrubio

[@rosht1699]

Works thanks

[@emilgeorgiev2684]

I have the same Issue with the same mouse. It seems razor is a crappy brand.

[@donbelisario8811]

I´ve found that you can also solve it by clening the reflector at the bottom with a little bit of alcohol and an Hyssop, but it was after watching this vid, so thanks man I was about to throug the f mouse to the trash can

[@blackz9220]

im getting lagging in sensor, when i move, my pointer dont move precisely

[@calvin87779]

yess me too

[@pixondu6833]

How did you brushed it?

[@AidanSidebottom]

Use a Qtip or a cloth and make sure the two pins don't have anything in-between them

[@pixondu6833]

@@AidanSidebottom ill try it. Ty

[@dailycontentmsc]

Can u help me how and whit i sould brushed it?

[@ahmedbetchimyounes4932]

recently I encountered a problem, my Razer Viper Mini mouse the buttons and Scroll work well but the mouse movement no longer works. please someone help me

[@synapse12]

did you fix??????????

[@ahmedbetchimyounes4932]

@@synapse12 No

[@emiyakiritsugu6329]

​@@ahmedbetchimyounes4932 how about now? it has been three months so you must have taken it to some tech store to fix?

[@kawkla_Soul]

i try to clean glass sensor with water and that works thanks but some time it happening again

[@rashaida7402]

what screw do i do i need to open the back

[@AidanSidebottom]

You need a small Phillips head screwdriver

[@rashaida7402]

hey so um i dont know what your talking about when brushing off the contact can you make another video and make it more clear which one i should brush off@@AidanSidebottom

[@ppouga1318]

I ve got another problem ... The sensor just randomly turns off like for a span of 1 sec wich is enough to make you lose a gun fight and recently its been getting worse and worse any tip besides getting a new mouse ..?

[@AidanSidebottom]

if the led seems to turn off occasionally while looking at the bottom of the mouse then you should take the mouse apart remove the plastic enclosure around the light bending the light up and cleaning anything that might be making contact between the two sides of the wire, I found the plastic part that holds the light in place on the PCB is not necessary

[@ppouga1318]

@@AidanSidebottom ik its the sensor cuz when it flashes and sometimes turns off cant move the cursor even if it moves it moves just 1 cm away from its original position

[@AidanSidebottom]

@@ppouga1318 I should have titled the video how to fix the light that shines on the sensor, if you see any flickering of the red light it is a problem with the light. Just remove the little plastic box around the light and clean the silver colored wire with electrical contact cleaner if you have any, wipe it with a brush or qtips and then bend the light back down, continue doing this until the sensor tracks

[@ppouga1318]

@@AidanSidebottom ok ill try ty for the advice

[@yazeed-vlr]

i have exactly your problem, have you fixed it yet?

[@nnot_highground3960]

My cursor jumping to left corner

[@nnot_highground3960]

When I move up or left it will instant jump to top left corner

[@johnnylondonozambrano8493]

I have the same problem right now, but sometimes it starts to work again

[@nnot_highground3960]

@@johnnylondonozambrano8493 happend to me again on this day

[@Omars6]

Same here. did u fix it?

[@Omars6]

@@nnot_highground3960 yeah razer products r just bad. Like why did my viper mini stopped working when it was working perfectly 5 mins ago it just doesn't make sense. This is going to be my first and last razer product

[@FreedSeed]

Got an issue with my Razer Viper 8k When I move my mouse to either the left or right, the cursor will start to climb even though my wrist has not moved up I'm thinking of replacing my mouse entirely due to this, this doesn't appear to be an orientation issue as corrective software such as Raw Accel yields the same results There's another person with this issue of a different Razer product kzbin.info/www/bejne/bGnXhoOnms6ebcU I'm wondering if you experience this issue as well? or have possibly fixed it in the past?

[@AidanSidebottom]

I haven't had this issue but I suspect that it's related to the actual mouse sensor which probably can't be fixed

[@ggena19]

Entonces como solucionaría mi problema? Esque no le entiendo mucho al Inglés jsj

[@MrChickenD]

1:25 dice que en su caso limpió esa conexión y le solucionó el problema

[@Tobtob911]

You do good video’s 👌👍

[@bad_to_the_bone4431]

You buy a Razer mouse thinking that you bought something good, but you actually bought shit. This doesn't happen even on 10 dollar mice.

[@Theflush_]

Yes! Also my blackwidow v2 keyboard is broken, it only used it for few months

[@raiji359]

Bruh hha after literally dissembling my mouse and it didn’t fix anything i just gave up and restarted my pc and mouse just magically starts working 😂

[@Monsieurrubio]

Liar

[@nnot_highground3960]

​@aqplaysgames bro it's truth,I got the same problem and it will happen again until my mouse cursor can't move(razer viper mini)

[@mxdesper4522]

It work lol😂