Today is Install Day! -Duane Links are below: This is the throttle & controller I bought www.ebay.com/i... This is the battery I bought www.ebay.com/i... Music is Operatic 3 by Vibe Mountain from KZbin's Free Audio Library.
Пікірлер: 143
@jayracz7014 жыл бұрын
I modded my e300 and I am happy to say it’s waaaaay better! It climbs hills like a champ now! I stuck a e bike 1500w controller in the old battery bin under the deck. There was not any room in there for anything else once you add all those wires too. So I bought one of those 3litre carbon fibre looking scooter bags that go on the handle bars to hold my batteries. I have a bunch of 5s lipos 10,000Mah and 5000mah that I run as 10s and two greenwork 40v packs. Any of these packs run the scooter and fit in the bag. Lipos are the best punch though. I decided to cut that brace off the back of the frame. I always hated the way the deck went over the rear tire. It also allowed a cleaner install of the zoom cable activated Hydraulic disk brake and 120mm disk. I made a wooden deck to replace the stock one. I also made a custom motor bracket out of angled metal to hold my 6384 e skate bl motor. This motor is much smaller than the stock one but way more powerful . It’s rated for 4000w but is only capable of 45kph before it smokes according to the specs. It needs a proper hall sensor connection to run properly with the controller. I tried all 36 possible combinations and found the best one. I put some Xiaomi fenders on and it’s looking pretty good I I am getting 40kph right now. It wheelies on start ups. So I could gear up the pinion and gain more speed. The controller has a handle bar mounted display that allows programming features which is a nice touch. It shows all kinds of info. It also allows you to turn on lights change speed settings on the fly and use a motor assist push feature. The current draw feature was helpful in finding the best hall sensor combination. The frame mods I made give the scooter a great look. And I painted it with some 350z metallic grey paint I had made to touch up my car. I said I wasn’t going to bother modding it. But I am glad it did. It cost lots of time and around 400 bucks to do. The scooter was bought for a $75 bottle of tequila. Would of been more if I already did not have batteries. Thanks for saving me the trouble of trying your mods first. That looked disappointing.
@XDM504 жыл бұрын
Hi Jay, Thanks for watching and commenting. Your scooter sounds awesome! These are fun scooters to modify. I've changed the configuration a few times but didn't keep up with making videos about it. Now it has a 36v controller and is powered by three 36v 4.4ah hoverboard batteries. Everything fits in the deck. It will do 20 mph and I goes about 10 miles distance. I think I'm done modding it. I bought an EMove Cruiser with 52v 30ah battery that will do 25 mph and will go 50 MILES on a charge. It's a big, heavy scooter but it's the most fun toy I have ever bought! :) Have fun and ride safe my friend! -Duane
@jld32296 жыл бұрын
I liked your mods, three extra minutes of run time is an improvement. Your install of the parts was great too!
@connorevs13156 жыл бұрын
i was actually looking into getting one to ride to work this ir really cool thanks for the vid
@XDM506 жыл бұрын
Hey Connor, You should get one. It's a lot of fun. Can you take it inside and plug it in at work?
@ArmsLovers5 жыл бұрын
Thank you very much for the detailed instructions, your video was extremely useful to me. I have purchased and upgraded e300s scooter for my child, and he loves it! Thank again, and happy holidays!
@XDM505 жыл бұрын
Thanks for your kind words. I'm glad you found my videos useful. Merry Christmas! -Duane
@mayensigarofalo21334 жыл бұрын
How many miles can it go
@BobNchannel6 жыл бұрын
Great work Duane, keep us posted on the performance , will ya please
@amrasurvival55806 жыл бұрын
Awesome short distance ride
@XDM506 жыл бұрын
Hi Mark, Yes it is. Lots of fun but not for 20 mile rides, for sure!
@Captain-Electro6 жыл бұрын
MO POWER!!! Pimp my ride Duane!!!
@XDM506 жыл бұрын
HAHAHAHAHAHA!! :D
@CSJiGSaW082 жыл бұрын
Get Lifep04 batteries with Ctek Lithium charger. Let me know if you interested in the brand for the Lifep04 batteries they are like 2 lbs super light and have 3000 recharge cycles
@stewartgrant19635 жыл бұрын
just wondering whether you should put something under that reinforcing strap. It was resting on the batteries so, as they've now gone, I'd be tempted to put a block of wood under it to provide support. V helpful video, thanks.
@XDM505 жыл бұрын
Hey Stewart, That's a good idea. Thanks for watching and commenting. -Duane
@grahambate33844 жыл бұрын
Nice pic of the roos
@XDM504 жыл бұрын
Cheers mate!
@mayensigarofalo21334 жыл бұрын
Nice video
@t-akethatsotherchannel57925 жыл бұрын
Scooter E300S stolen in Berlin-Spandau ! Date: 19.06.2019 with some extras like seat, handyholder, Drinkbottleholder , Light, ext.
@TakiFishMan3 жыл бұрын
Will that new speed controller fit without replacing the original battery’s?
@XDM503 жыл бұрын
Yes, it's for 24 volts. Will work fine with stock SLA batteries.
@TakiFishMan3 жыл бұрын
@@XDM50 But will it fit inside of the battery holder still because controller is bigger than the stock one
@TakiFishMan3 жыл бұрын
@@XDM50 ?
@XDM503 жыл бұрын
@@TakiFishMan Yes, it fits inside.
@TakiFishMan3 жыл бұрын
@@XDM50 oh ok thanks you
@MiamiElectrix5 жыл бұрын
I hv all the parts im currently upgrading the batterys to the lion. And changing the sproket and the chain. This will mk the top speed about 22-25. Mph. Idk how long it lasts in miles prob 12-20. Bsipp
@XDM505 жыл бұрын
Hey Barry, Thanks for watching and commenting. Have fun and be careful out there. Duane
@crashjump18495 жыл бұрын
Thanks for sharing, looking forward to the next video for the results.
@michaelanderson97923 жыл бұрын
I have a e300 on order from Amazon just got a flat on my bike so saving that inter tube for e300 upgrade
@ignacybanasiak97894 жыл бұрын
Nice video!
@XDM504 жыл бұрын
Thank you! :)
@wc67402 жыл бұрын
I have this scooter is it difficult to replace battery. How many extra miles can you get using lithium battery?thanks
@XDM502 жыл бұрын
The key to distance is AH or Amp Hours. The E300 comes with 7 or 8 AH lead acid batteries. If you replace them with 7 or 8 AH Lithium your distance will stay the same. If you are not too heavy you should get about 1 mile per AH. If you want more distance you need more AH. The most popular way to do this is to convert the scooter to 36v (with new controller and throttle), then add hoverboard batteries. Hoverboard batteries are 4.4 AH each and you can fit 3 of them under the deck, giving you 13.2 AH, which should get you close to 12 miles. Here is a Facebook group of people modding these Razor scooters. Check out the "Files" section for basic how-to. Feel free to ask questions. facebook.com/groups/1767120973337718 Peace, Duane
@wc67402 жыл бұрын
@@XDM50 thanks duane
@Dashjiro932 жыл бұрын
I liked mod amazing I used wild scooter parts speed controller
@XDM502 жыл бұрын
Thanks for watching. I'm glad you're having fun with your scooter. Cheers, Duane
@mountainman.44786 жыл бұрын
Great video. Im impressed ! your really good at that mod . Lets see you ride it next video....please :) FYI its like fall around Seattle. Thanks Duane :)
@EleonoraAr5 жыл бұрын
Hello. The scooters comes with two 12v batteries. I don't understand why you change it for a 24v Battery. I am sorry if this is a stupid question but I am a beginner. Thanks in advance
@XDM505 жыл бұрын
Hi, thanks for watching and commenting. I switched to a 24v lithium battery because it's lighter and will last for about 5 years with regular use. The 12 volt lead acid batteries are heavier and will only last about a year (maybe 2 years if you're lucky). It would actually be smarter to wait till the old batteries need replaced before you switch to lithium.
@EleonoraAr5 жыл бұрын
Thanks @@XDM50 for your fast answer. So, if I change only the throttle & controller, will I get more speed? Thanks again!
@XDM505 жыл бұрын
It will be a little bit faster, like 2-3 miles per hour faster. What you will notice most is faster take-offs and it won't struggle quite so much on small hills. To get the maximum amount of ride time, I walk mine up any significant hills. Good luck my friend! -Duane
@t-akethatsotherchannel57925 жыл бұрын
Oh sb had a problem: I needed the data sheet of paper of data for the ensurance. i lost it. (allowness for using it) . for the E300S. I dont use it on the street but they wanted it. Old problem.
@XDM505 жыл бұрын
Sorry to hear that. Insurance is not required on these scooters where I live.
@t-akethatsotherchannel57925 жыл бұрын
@@XDM50 this is germany . perhaps also not. Shitbull!
@zuseable6 жыл бұрын
nice video thanks for the tip on handle grip alcohol trick
@XDM506 жыл бұрын
Thanks bro!
@docink61756 жыл бұрын
that battery is wild
@XDM506 жыл бұрын
Yeah it is! HAHAHAHAHA!
@docink61756 жыл бұрын
Im looking to add a house battery to my truck to run my inverter and for camping but a regular deep cycle battery takes up a lot of space, that battery would look cool mounted on the front of the roof rack but its 24v so I would need to wire in a step down converter... and the rusty gears keep grinding along....
@steventipton51305 жыл бұрын
I well be buying one of these .. is it possible to have both batterys the stock batterys and the one you bought both hooked up at the same time and use a toggle switch to get more mileage out of it .. i have no idea but i had that thought when i watched your video .. very nice video and review
@XDM505 жыл бұрын
Hi Felix, Good choice. These are solid scooters that are easy to work on. To answer your question, yes, you could do that. The only drawback I see is that it's going to be heavy. But it would almost double your ride time so it's a good idea.
@ArmsLovers5 жыл бұрын
Felix, I came with somewhat different concept. I have upgraded the scooter for my child by removing and trashing original batteries, in other words, I have very much followed the instructions from this video. My scooter has a sit (model e300s). I have purchased a spare battery, and attached to the back of the sit. The batteries are swappable, when primary runs out of power, I just swap it with the spare one. This way I have doubled the milage, ... but at the cost, since batteries are not cheap.
@steventipton51305 жыл бұрын
Are the new batterys rechargeable ? What is the name of the new batterys you chose ? Can you post a picture of how you have the new batterys on the scooter so i can see it thank you
@ArmsLovers5 жыл бұрын
Felix Mcturk, yes, batteries are rechargeable, charging time about 3 hours. You can find exact models and links to eBay store in description of this video. In relation to me posting pictures - I can make a video on my KZbin channel, but I do not think I can expose anything new. I just followed instructions from this video. I want to mention, if you are planning to use a sit, then you need to buy a scooter with the sit (model e300s), since regular one (model e300) does not have a sit. So, if you have a sit, then you can hook the spare battery to it, otherwise you have no spots on the scooter to attach spare battery (other than carting spare battery in your backpack). Finally, if you are upgrading scooter for the child, then you are fine, you only need to replace controller, throttle and battery. However for the adult you may consider also replacing the motor. You can buy the updated motor from the same maker who makes controllers (check links in the description), and you should get the throttle with digital screen that displays remaining voltage. Good luck!
@steventipton51305 жыл бұрын
@@ArmsLovers thank you
@MissBELLE0036 жыл бұрын
👩👩👧👧 Dude I’m not sure about this video but well said ! Have a happy Sunday!
@XDM506 жыл бұрын
Thanks Dude! Err, Dudette! :D
@MissBELLE0036 жыл бұрын
XDM50 lol do some girl things do a make over lol just kidding ! 💄👄🤡
@XDM506 жыл бұрын
BAHAHAHAHA!!! :D
@aaddaarraakk6 жыл бұрын
I LOVE INSTALL DAY!
@XDM506 жыл бұрын
Hi J, LOL Me too! :D
@johnandreas37274 жыл бұрын
How fast should your scooter go now?
@XDM504 жыл бұрын
Hi John, With these mods it will still only do 15 mph. If you want more speed, you need to increase voltage (36v batteries). Duane
@Domduro5 жыл бұрын
Good job!!! But the engine is the same as original? Not burn It?
@XDM505 жыл бұрын
Pennino Cavallotti, Yes, same original motor. No problems yet. -Duane
@TakiFishMan3 жыл бұрын
How much does the battery cost?
@XDM503 жыл бұрын
I think I paid $160 for this battery. I eventually replaced this new battery and the stock batteries with 3 hoverboard batteries. That's what I'm using now.
@TakiFishMan3 жыл бұрын
@@XDM50 oh ok thank you so much
@GanjaClaus6 жыл бұрын
Kick asz video editing and engineer skills, Bro! Bet you also could turn a household vacuum cleaner into a jet engine :D
@XDM506 жыл бұрын
Hahahaha! Thanks bro! I appreciate you!
@deejay15695 жыл бұрын
The bottle battery is a great idea! Can you do a video of how you connected the new battery to the controller and to the motor ( including what connectors being used)
@XDM505 жыл бұрын
Unfortunately the bottle battery was cheap quality and it quit working. It's in the recycle bin at Home Depot.
@CSJiGSaW082 жыл бұрын
I bought a basket bin and put it In the front lower part of the stem facing foward. I have 4 LifeP04 batteries with Ctek charger and for a 1+2 battery on off switcher like marine style. I can selective switch which bank or both are on. The bottle batteries would be great but I prefer LifeP04 batteries
@grandtheftauto12334 жыл бұрын
Cool scooter and nicely implemented battery mounting solution! Did you ever upgrade the motor itself? Thanks!
@XDM504 жыл бұрын
Thanks for watching and commenting! The battery in this video turned out to be defective so I upgraded (again) to 36 volt hoverboard batteries. The motor handles it just fine. I won't upgrade the motor till I have to. Duane
@grandtheftauto12334 жыл бұрын
XDM50 that’s a bummer to hear that battery had gone bad. Did your hoverboard batteries sit within the stock location? Did you find those online? Thanks for the reply!
@XDM504 жыл бұрын
@@grandtheftauto1233 3 hoverboard batteries will fit under the deck without modification. That gives me almost 10 miles of distance and a top speed of 27 mph. The batteries were about $35 each. I also had to upgrade to 36 volt controller & throttle, about $60. Now I'm very happy with this scooter. :)
@angstfree20084 жыл бұрын
@@XDM50 Can you link to the batteries, controller and throttle you upgraded to? Also, would love to see the install.
@XDM504 жыл бұрын
@@angstfree2008 This is the controller and throttle www.ebay.com/itm/Razor-E300-upgraded-throttle-controller-electrical-kit-36-Over-Volt-Kit/141459088618?hash=item20ef9e64ea:g:x0AAAOSwLa9UV6NK
@mykko32623 жыл бұрын
Does it work with the razor e325
@XDM503 жыл бұрын
Yes, but I learned there are better ways to upgrade these scooters. If you change the controller out with a 36v controller and replace the batteries under the deck with 3x 36v hoverboard batteries, you will get about 20mph and about 10-12 miles of distance. Search KZbin and also Facebook groups like facebook.com/groups/1767120973337718
@MrAnadad5 жыл бұрын
is it possible to upgrade from 200w to 3500w controller please let me know. thanks
@XDM505 жыл бұрын
I don't know, sorry.
@johnrwygle5 жыл бұрын
Yes, but your motor could not handle it. So it needs replacing with a 3kv motor. Huge they are. And 3500w will be 48v controller pushing a bunch of batteries. That would be a 14s battery pack. Quite large.
@shanda26004 жыл бұрын
Can this modification be used on the E 200 scooter? Thanks!
@XDM504 жыл бұрын
Yes, should work the same on E200.
@shanda26004 жыл бұрын
XDM50 thank you !!
@mayensigarofalo21334 жыл бұрын
Nice
@michaelanderson97923 жыл бұрын
I got a China controller box it’s in Chinese and none of the connections match real pain
@XDM503 жыл бұрын
Search KZbin for how to match the wires. I saw a video a long time ago that did a great job of identifying each wire on the China controllers. I would share a link but now I can't find it. Something like... How to hook up ebike controller... Or something like that. Good luck bro!
@1hrplugzzz5 жыл бұрын
Do you have to use the bottle battery
@XDM505 жыл бұрын
Hi CJ Reece, I eventually put the SLA batteries back inside the deck so I had double the battery power, double the amps, and almost double the distance. But that made the scooter very heavy. -Duane
@1hrplugzzz5 жыл бұрын
Can you email me a video showing how to put the SLA batteries back in and plug them into the controller and how to plug the charger port in the controller to charge the SLA batteries Email:cjreece76@gmail.com
@1hrplugzzz5 жыл бұрын
I will be very happy if you do so
@XDM505 жыл бұрын
I would, but now I have it back to stock and I'm trying to sell it.
@1hrplugzzz5 жыл бұрын
Can you explain to me how you did it
@hugh28825 жыл бұрын
Have the batteries blown up since? Actual question
@XDM505 жыл бұрын
They haven't blown up but the run time has gone way down.
@dontdomeboo816 жыл бұрын
Your cool man😊
@XDM506 жыл бұрын
Thanks Gurl Bye! So are you! :)
@larrystamp95903 жыл бұрын
why not just keep the old batteries in there place make a disconnect and use them as backup
@XDM503 жыл бұрын
That is one option.
@MiamiElectrix5 жыл бұрын
If u still hv your 12volt batterys and they still work i wld buy them from u im doing a 48volt build. And need some cheap batterys i hv one now and need 3. Thabks Barry s
@XDM505 жыл бұрын
Hi Barry, I'm not sure which way I'm going to go with this scooter. Right now it has the original 12 volt batteries in it. They actually gave me longer run time than the 24 volt lithium bottle battery. I may switch to 36 volt or I may sell the whole thing and buy something different. Just haven't made up my mind.
@CaseVault6 жыл бұрын
Could you please give me a link to it Btw Great video very nice!
@XDM506 жыл бұрын
Thanks bro! I just added links in the video description. Have fun! -Duane
@CaseVault6 жыл бұрын
XDM50 thanks!
@Poepad5 жыл бұрын
if you did not want to affect the paint why use STICKY tape, just use an old innerturbe. Replacing with lith is far easier. TIP: Use voice over instead of music, double your view time.
@XDM505 жыл бұрын
Hey Kevin, Thanks for the tips. Duane
@genya31625 жыл бұрын
Whats the top speed?
@XDM505 жыл бұрын
15 mph @ 24 volts. You can get more speed if you run it at 36 volts, but the motor will eventually die.
@genya31625 жыл бұрын
@@XDM50 I mean with the one you installed
@XDM505 жыл бұрын
@@genya3162 Still 15 mph because it's still 24 volts.
@genya31625 жыл бұрын
XDM50 so that’s the battery in the description?
@genya31625 жыл бұрын
XDM50 I mean the speed controller
@rockcatgamer94105 жыл бұрын
can you do this on mine!
@XDM505 жыл бұрын
No.
@PREPFORIT6 жыл бұрын
I Was up North Fishing. catchin up On You tube vids - OMFG Duane that Does NOT say " High Performance " it says " HYPERDRIVE " !!!! : Do NOT end up on the Moon !
@XDM506 жыл бұрын
Hahahahahaha!!! HYPERDRIVE!!! That would be awesome! :D
@steventipton51305 жыл бұрын
Nicse bat leth on the wall
@XDM505 жыл бұрын
Thanks Felix!
@vamphigherextreme42483 жыл бұрын
Fast scooters is a scam
@XDM503 жыл бұрын
Not a scam. Of course you can get throttles and controllers cheaper if you shop around and if you want to try and figure out what connects to where. But with the kits from Fast Scooters, it's all plug and play. There is no guess work. I'm happy to pay extra for that. They have sold hundreds of kits so they are doing something right.
@vamphigherextreme42483 жыл бұрын
@@XDM50 I've just found that you can get better preprocess and better deals elsewhere if you know what you are looking for. Problem is, very few out there will honestly consult with you too determine what that is.
@vamphigherextreme42483 жыл бұрын
@@XDM50 that's the problem. It would be very simple to just tell someone what connects to what and why but most companies either won't tell you that out don't know themselves so they try to just sell you two or three things instead
@vamphigherextreme42483 жыл бұрын
After getting nowhere with any of the dealers and being told my scooter was a list cause, what I wound up doing is spending about six weeks learning everything I could about the things, until I was confident enough to fix it myself. The whole thing started over the throttle, 3 wires,5 wires, 7 wires etc. I was told everything from"they don't make those anymore" to "you have to but the throttle and controller together as a set" but what I found out was they're all full of shit it don't know what they're talking about because I could wire up just about anything as a throttle. In fact, I do have a peddle on the deck as a secondary throttle now. I've used three or four different controllers and changed components half a dozen times and nothing I was told was ever true. It's not rocket science but many dealers sure would have you believe it is. My 17 mph scooter that was supposedly a lost cause just ripped 40mph the other day during testing of the boost module I'm working on. Your overvolt idea is the right one but what I would do, is I were you, is get a good controller, something that has at least 12 mosfets in it that can handle varying voltages above and beyond the 36v, at least up to 48v and 30 amps. Them get yourself a second battery to match the one you have in voltage poor wait till it's time to buy another battery and get two instead. As soon as you connect two batteries in parallel and overvolt by at least 12-20 volts over what the motor rates at, you will be blown away. I run 56v through a Currie 1000watt 36v rated motor and it loves it. The extra amps that flow because of the second battery give it so much not torque is unreal. And the 20 extra volts, with a few mods, room it from 17-19mph, to 37-40mph, with five times the range.