How to reset oil light on 2013-2020 jeep grand cherokee laredo

[@davidfrisch5538]

You can also press the gas pedal 3 times .. in that same setting to restart

[@shawnyarborough5981]

Ok button wasn't doing it. But the gas pedal method worked wonders. Much obliged

[@mariadaniel3554]

This worked thanks!! The one in the video didn’t 😅 👌

[@ndcookie]

Thanks for this the ok did not work for my 2015 jeep

[@cassandrastudivant6168]

You are awesome for this because the ok button didn’t do it for me but the gas pedal one did

[@Ilobley]

@@shawnyarborough5981 thank you I couldn’t get the reset to display!

[@steffinmezger5301]

The whole video I was screaming get to the point

[@RBTheMechanic]

It’s important to explain some and other might not know what and why

[@moneyrubio9776]

Yea he took for ever! Like hurry up!

[@RBTheMechanic]

@@moneyrubio9776 take ur time like me do it correct

[@johnviera3884]

Holy smokes. 1. Without pressing the brake, press the start button twice. 2. Scroll to the vehicle icon. 3. Scroll to Oil Life 4. Hold down the OK button for 3 seconds

[@GregoryViljoen]

Hi. I have 2013 Jeep Grand Cherokee. I can get to the message but there is no Ok button on my Steering wheel. Any suggestion?

[@RBTheMechanic]

The center button

[@lexcan05]

you got way to much air pressure in those tires LOL, check inside your drivers side door for correct pressure.

[@RBTheMechanic]

Customer choice I don’t touch it

[@Holla_4_dolla]

Omg!!! Just tell us how to fucking reset the light already!!

[@kjdcomp1]

The correct way to reset oil light is to with engine off and car in run hit gas pedal 3 times in 10 seconds turn car off then restart oil life should be at 100%.

[@mathowgaming6003]

Thank you! Worked on my 2018 Cherokee

[@RBTheMechanic]

No problem please subscribe also subscribe to my other channel here’s a link kzbin.info/door/vqsPzqAZfVv_gjBYUFqNdg

[@jordanthegoat2024]

Thank you!

[@RBTheMechanic]

Sure!! Glad the video helped!!!

[@manorabrucelee2056]

Thank you ! Thank you ! Thank you ! Thank you! I had it on ACC when I put ut on Run it worked like magic 🎩 ✨️ ✨️ ✨️

[@vishu.korgaonkar]

Why does your MIL indicator stays on while all other LEDs goes out after few beeps. Also there is single beep which can be heard after few second after other LEDs go out.Shouldn't the MIL indicator also go out with other idicators?

[@RBTheMechanic]

No some light stay on till car starts up the engine

[@vishu.korgaonkar]

@@RBTheMechanic Thank you

[@dennisdbtrucks7949]

all so with it in on position push gas 5 times fast to clear

[@RBTheMechanic]

Yupp

[@RBTheMechanic]

3 times

[@stevenbates4882]

Ok I tried that but my next question is when I hold the ok button mines dont blink and if it did it still shows the 100% life how do you make that go away ?

[@RBTheMechanic]

Use the scroll button up and down ur still in the setting u just have to get out of setting

[@stevenbates4882]

@@RBTheMechanic ok thank you am at work now am off at 7pm soon I get home I try it again

[@WUBtile]

Figured it out before you even finished the vid

[@RBTheMechanic]

Lol good job!!!

[@SP-ny9yn]

Thank you! It worked for my 2020 Grand Jeep Cherokee!

[@checkc131]

Wow, took 3:05 to give 10 seconds of information.

[@RBTheMechanic]

Yes have to explain it well not every one know it like u might

[@MrLacri]

he doesnt know what he is doing

[@jusdane22]

My Grand Cherokee is a 2013 ... and my steering wheel buttons look nothing like this.

[@benjo33]

This is utterly false

[@westsideeuro4444]

3 minute video could’ve been 1 min🤦🏻‍♂️🤣

[@RBTheMechanic]

Gotta explain buddie other wise 20 seconds!!!

[@algenerator3000]

u take too long

[@keithscott533]

didn’t work with my 2020 grand cherokee

[@RBTheMechanic]

I just did one last week try again