Рет қаралды 4,511
Video number 10 of the series for building a scale radio-controlled sailboat of the Beneteau Oceanis 37, is a DIY project in which I show how to make an RC sailboat from scratch using 3d modeling based on images top and side of the model, then designed a creates molds using 3d printing.
In this episode, I will design some covers using aluminum, paint the hull and the flotation line using a laser as a guide, and cover the cabin floor with wood. Hope enjoin the content!!!
Filming Gear:
Canon EOS R amzn.to/3WtLQIQ
Deity V-Mic D3 amzn.to/3DYmlsa
Tools:
3D printer amzn.to/3DwgmJk
Laser Level amzn.to/3FI2yOY
Digital Electronic Caliper amzn.to/3Wq86TS
Rotary Tool Kit amzn.to/3DTvCRW
Cordless Drill amzn.to/3Nyrf2c
Drill Bit Set amzn.to/3sO1qkS
Materials:
Primer amzn.to/3E60PSp
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. If you buy something it won’t cost you any more but the channel gets a little help to support the channel and allows us to continue to make videos like this. Thank you for the support!
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Music by INOSSI
Listen: spoti.fi/2EzvEA6
Watch: • INOSSI - Moments (Offi...
Song: INOSSI - Wanna Go
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: • INOSSI - Wanna Go (Vlo...
Music by Madirfan
Spotify: spoti.fi/3l0mtu9
KZbin: / madirfanmusic
Track: Stable - KV [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Stable - KV | Free Bac...
Free Download / Stream: alplus.io/stable