RC sailboat build Beneteau 37 part7

Video number 7 of the series for building a scale radio-controlled sailboat of the Beneteau Oceanis 37, is a DIY project in which I show how to make an RC sailboat from scratch using 3d modeling based on images top and side of the model, then designed a creates molds using 3d printing.
In this episode, I will show the radio control components rudder servo, sail servo winches and motor all tested and working together, also deck work to fix all imperfections and the different hatch to access for front sail servo, radio, internal components inside the hull and how I made the handrails out of brass. Last I show the construction of some rigging hardware for the RC sailboat like turnbuckles, gooseneck, and vang.
Filming Gear:
Canon EOS R amzn.to/3WtLQIQ
Tools:
3D printer amzn.to/3DwgmJk
Digital Electronic Caliper amzn.to/3Wq86TS
Rotary Tool Kit amzn.to/3DTvCRW
Cordless Drill amzn.to/3Nyrf2c
Drill Bit Set amzn.to/3sO1qkS
Tap & Die Tool Set amzn.to/3DvmGkt
4 Inch Bar Clamps amzn.to/3DVjsYM
Materials on Amazon:
Hitec RCD 33785S HS-785HB amzn.to/3T1jVNq
high Torque Coreless Motor servo amzn.to/3NwZMOi
4pcs XT60 Plug Male Connector amzn.to/3tcRzpj
SN-28B Crimping Tool amzn.to/3UpMLIF
Kits Servo Connector amzn.to/3h915Ha
Steel Universal Joint Cardan amzn.to/3h91c5y
Drive Shaft amzn.to/3Wq6ae6
Brass Telescopic Tubing amzn.to/3UjlLKS
Brass Rod amzn.to/3fsJae3
Silver Solder amzn.to/3DB5z0R
Aluminum Welding Wire amzn.to/3fy8Cif
Materials on Hobbyking:
- Sail Winch Servo 25T 61G hobbyking.com/en_us/turnigytm...
- Turnigy AquaStar 3660-1700KV hobbyking.com/en_us/turnigy-a...
- HobbyKing 90A Boat ESC 4A SBEC hobbyking.com/en_us/hobbyking...
- 4mm Gold Connectors 10 pairs hobbyking.com/en_us/4mm-gold-...
- Turnigy 3000mAh 3S 30C Lipo Pack hobbyking.com/en_us/turnigy-b...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. If you buy something it won’t cost you any more but the channel gets a little help to support the channel and allows us to continue to make videos like this. Thank you for the support!
------------------------------
Track: Be Mine - Amine Maxwell [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Be Mine - Amine Maxwel...
Free Download / Stream: alplus.io/be-mine
------------------------------

[@rickyricardo9166]

Doming, beautiful and magnificent craftsmanship and build!! I am enjoying and learning a lot on your Beneteau RC Sailboat videos! Looking forward to see the boat finalized and in the water!!

[@domingomartinezt]

Glad to share all the progress and documenting this project, I'm also learning at the same time from you guys!

[@coordenadasca]

Domingo excelente todo como siempre... Ese velero va quedando calidad

[@domingomartinezt]

Gracias el comentario hago lo que está a mi alcance para que quede de lo mejor!!! Saludos.

[@RandomProjectswithSam]

Great attention to detail! Fantastic troubleshooting!

[@domingomartinezt]

Thanks man!

[@efranyeguez8179]

Saludos primo!

[@domingomartinezt]

Saludos por España!!

[@kampai26]

Great built! For the hatch mold you can try using more thickened epoxy or rovings in the corners. For the mast I recommend a carbon tube or two tubes (one bigger and one with smaller diameter glued together) and then make the shape with glassed foam. The mast must be light for sailing performance. For the keel you may consider a stronger filling than plywood like carbon or solid glass so that it doesn‘t bend. Great work!

[@domingomartinezt]

I already finished the cabbing hatch using silica to tick the resin. I'm thinking first iteration for the mast on wood, and since is detachable and can change it to more spence high performance one on the future, thanks for your comments!!!

[@jeanlouis5430]

congratulation because its VERY VERY DIFFICULT to have plans from BENETEAU !!

[@domingomartinezt]

Hi Thanks, Although I don't have the plans, I 3D designed the hull base on two 2D images top and side.

[@piunelsilenciador3798]

Donde vive a mi mecanta los bote de vela...yo vivo en Florida Tampa Bay

[@domingomartinezt]

Yo vivo en Austin Texas

[@jeanlouis5430]

good morning i am also owner of a reduce rc model of a BENETEAU but it is FIGARO II 1/10 eme scale you can see it on YOU TUBE figaro de jean louis issued from a project in my club

[@domingomartinezt]

Yes I saw the video very beautiful model, how long was the building time, materials and design?

[@jeanlouis5430]

@@domingomartinezt good mornig the hull is issued from a club project severl years ago made of fiberglass ( we have the moule ) project stopped by the owner and i have bought this hull second hand new paint and sails also i install also electric motor ( graupner speed 400 ) radio controled the revision of " ty nouff " ( its the name of the boat ) take 3 months