RC lights and sounds controller based on arduino nano (include arduino SW sketch)

  Рет қаралды 11,973

MartinD models

MartinD models

Күн бұрын

Пікірлер: 31
@VicOrlando
@VicOrlando 3 жыл бұрын
This is awesome! I might have to do this
@martinDmodels
@martinDmodels 3 жыл бұрын
yeah, you can do it for yourself, exterior body parts are now available on thingiverse: www.thingiverse.com/thing:5139356/files
@Evilslayer73
@Evilslayer73 9 ай бұрын
@@martinDmodels link is broken
@antonga1
@antonga1 8 ай бұрын
Hello, of the entire board, only the right blinker is there, the left one has constant 5v and the sound cannot start. Can you give me some advice?
@YetAnotherRcChannel
@YetAnotherRcChannel 3 жыл бұрын
Love it👍 Subscribed✌️
@GDIdoujinmediaworks
@GDIdoujinmediaworks 3 жыл бұрын
Did you know that DumboRC just came out with the X6DC receiver with integrated LED functions for headlights, signals, brakes, reverse, and strobe? (Yeah, after I customized 3 RC receiver readers already, two using Nano and one using STM32.) Oh well. At least I have some American car bodies to light up, you know how US market cars use their brake lights as turn signals? So there's still a place for the custom method. Also modern cars have DRLs (Daytime Running Lights) that turn into turn signals, you can have some fun with RGB LEDs... usually I wire the Red and Green leads to get the yellow/orange, then activate/deactivate the Blue to go back to white light. I also have a Mustang body which I want to create sequential turn signals for. Now I am very curious and I will try your implementation as a base since I could never get the brakes and the reverse lights to function properly (one has to be sacrificed, usually the reverse). I notice you use PulseIn instead of AttachInterrupt, I think it will work better just like how for the "6 channel rc receiver stm32" the version made using input capture mode is faster and more consistent compared to interrupts. Also there is an implementation of engine sounds without having to use an SD card nor mp3 player module -- the sounds are converted into header file data...there's an ESP32 implementation for the Tamiya trucks but its very complex so I'm trying to just extract the sound processing method while combining it with the simpler lights for cars. In any case, your craftmanship is very commendable and maybe one day you can be the next DarkDragonWing or Macky Works Drift!
@martinDmodels
@martinDmodels 3 жыл бұрын
I did not know about X6DC receiver but I definitely try it! Thanks! Idea with RGB leds sounds nice, but for now, I dont have project for this application.... In my code I am using PulseIn only in setup(), then I using modified PulseIn function because PulseIn is very inaccurate when sounds is playing... I dont using interrupts because it has negative effect to sounds playing... Yeah, I found ESP32 project you tolking about, idea with sounds in header sounds great, I will try to implement it to ver2 of my controller :) ... Thanks for good ideas!
@contoh6523
@contoh6523 3 ай бұрын
Is it possible without an SD card, and only sound, not including lights?
@martinDmodels
@martinDmodels 2 ай бұрын
Hello, no, it is not possible. Without SD card only lights.
@nenebaez4145
@nenebaez4145 8 ай бұрын
Excellent project, can you share the diagram with me?
@AkashJadhavIT
@AkashJadhavIT Жыл бұрын
hello Sir, does DC motor also drives via this or we have another setup for that, i am trying to build a small circuit for my small HO scale train locomotive. so i can use same circuit as you did
@martinDmodels
@martinDmodels Жыл бұрын
Hello, this is lights/sound control modul, it is not intended to drive motors. This module control LEDs and generate engine sound anccordding to signals from common RC modes receiver. I know nothing about train models and how they are controlled, so I am not sure if this module would be useful to you, but I guess it doesnt.
@MuchamadDarmawan
@MuchamadDarmawan 2 жыл бұрын
hi, this awesome!! what kind of dumborc remote communication settings?
@martinDmodels
@martinDmodels 2 жыл бұрын
Hello, I did not make any communication settings, remote control is just out of box.
@Evilslayer73
@Evilslayer73 Жыл бұрын
Hi its an awesome project !!can we changed the sound?
@martinDmodels
@martinDmodels 9 ай бұрын
Hi, yes, We can. Sound samples are save on sd card
@PyccoloSantos
@PyccoloSantos Жыл бұрын
Excuseme, How long can be the wav files, Im thinking using 5 minutes. ty cheers?
@martinDmodels
@martinDmodels Жыл бұрын
Hello, to be honest, I don't know. This project is using TMRpcm library and I didn't find info about max length of track in this library. But I know, that some people made music player using this library, so I believe that 5min track should be OK.
@im1forfun
@im1forfun Жыл бұрын
genius!
@martinDmodels
@martinDmodels Жыл бұрын
Thank you for that 😀
@antonga1
@antonga1 9 ай бұрын
Hello,how many ohms are the trims?
@martinDmodels
@martinDmodels 9 ай бұрын
Trims values are not noted in schematic but their value really dont matter because they are like voltage divider so you can use 1k or 3k3 or 10k, what you can find at home. I used 1k on my project.
@ithaajja5724
@ithaajja5724 3 жыл бұрын
how can i change the sound files? i'm using for RC Jeep Offroad
@martinDmodels
@martinDmodels 3 жыл бұрын
You have to replace files on sd card. You need sound samples of your offroad engine in idle rpm , low rpm, middle rpm and high rpm: - Iddle rpm is for file idle.wav, - low rpm is for 2k.wav file, - middle rpm is for 3k.wav file, - high rpm is for 4k wav file. You also need to make transition sound samples (mix two sounds): - transition sound idle to low rpm, file idleTo2k.wav, - transition sound idle to middle rpm, file idleTo3k.wav, - transition sound idle to high rpm, file idleTo4k.wav, - transition sound low to middle rpm, file 2kTo3k.wav, - transition sound middle to high rpm, file 3kTo4k.wav, - transition sound low to high rpm, file 2kTo4k.wav, ... I made transition sound by mixing two sounds in Audacity software. I hope this helped!
@ithaajja5724
@ithaajja5724 3 жыл бұрын
@@martinDmodels Thanks bro.....nice work
@bologanbogdan6634
@bologanbogdan6634 3 жыл бұрын
Very nice.are you made for sale ? Thx
@martinDmodels
@martinDmodels 3 жыл бұрын
No, I am not doing it for sale... But if you like to build one, everything what you need to know you can find for free in links in video description.
@vidawild5669
@vidawild5669 Жыл бұрын
Legal faz um projeto desse para controlar com controle de ps3 para um caminhão ... E se vc vender o projeto eu compro .
@martinDmodels
@martinDmodels Жыл бұрын
I do not planning it. I dont have PS controller and I also not very interested in trucks. But feel free to modify my code, it is available to everybody for free on my patreon site.
@rj26manrajdevrithalla51
@rj26manrajdevrithalla51 3 жыл бұрын
Buy PCB board link send me
@martinDmodels
@martinDmodels 3 жыл бұрын
I am not selling PCBs, This one was custom made, but you can make one for yourself. If you type "PCB prototyping" into google, you can find companies, which make custom PCB for you for really cheap, all what you need is send them PCB design - you can make your own PCB design or you can download my design on my patreon site: www.patreon.com/posts/rc-lights-and-49189947
3D printed Radio Controller - Arduino&NRF24
16:17
Electronoobs
Рет қаралды 137 М.
1/150 DIY Micro RC Truck & Trailer
11:46
diorama111
Рет қаралды 10 МЛН
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
DIY Arduino RC Receiver | Radio Control for RC Models and Arduino Projects
15:26
Using an RC Controller with an Arduino [With code and wiring]
13:31
1/10 scale Audi Rotor rims - 3d printed!
9:59
MartinD models
Рет қаралды 1,9 М.
How To Make A DIY Arduino Joystick Control Car At Home
6:34
DIY Builder
Рет қаралды 856 М.
The Best Engine Sound & Light Controller For RC Crawlers & Trucks!
8:48
DIY Arduino based RC Transmitter
15:21
How To Mechatronics
Рет қаралды 1,1 МЛН