How To Make A DIY Arduino Joystick Control Car At Home

[@manityagi633]

One suggestion while moving left or right both sides motor should move in opposite direction for smother turns.

[@danielsunday8417]

The project is very good. Can you please correct the sketch so that it can be fully functional, including variable speed operation? You must make the following changes to the sketch: #define in1 3 // D3 arduino to IN1 of L298N #define in2 4 // D4 arduino to IN2 of L298N #define enA 5 // D5 arduino to ENA of L298N #define enB 6 // D6 arduino to ENB of L298N #define in3 7 // D7 arduino to IN3 of L298N #define in4 8 // D8 arduino to IN4 of L298N RF24 radio (9, 10); // CE, CSN Also, the respective changes will be made in the JOYSTICK RECEIVER SCHEMATIC. Only one correction will be made in the transmission sketch: RF24 radio (9, 10); // CE, CSN There is another small error in the sketch, when conditioning the speed in the range 0 to 255 that can be corrected. Thanks.

[@MSalim21]

hi after doing this change in the sketch do i need to change my physical circuit or not?

[@whynot1284]

@@MSalim21 probably not because since he said correct the sketch the thing itself should work

[@shaunthomas1166]

@@whynot1284 did it work for u with the corrected sketch?

[@Ryuuu-qk7uk]

Does this work

[@worldofcircuits7157]

Awesome project!!! but when I tried it out the signal of radio module doesn't last long what should I do

[@mohitjagdale3513]

same problem

[@priyanshuberi7602]

See your battry is discharged

[@smitapatil55]

See bro, You are the best Arduino Builder But the problem is That the connections you make is not shown properly I suggest as a viewer, If you start showing complete step by step then you will be the most viewed Arduino project maker on youtube

[@DIYBuilder]

Thanks bro and soon i will start voice-over videos where i'll explain every details

[@RaviKumar-rp1sj]

@@DIYBuilder plz sir uploaded the correct code we wanna to make it successful our project..toughly I arrange all the components...

[@explorer1360]

kzbin.info/www/bejne/pYDSqqOIfbKNY9E

[@David-vu7ie]

​@@DIYBuilder Hello, can duo please update the code? thanks în advance

[@docta_petervengkman]

​@@DIYBuilderliar!

[@fouzanjaved5441]

sir, good joystick-controlled robot and how many days you have spent to finish your joystick-controlled robot.

[@vinodh55500]

I had taken 5 days

[@LAZYLONER-]

you ordered dot pcb from JLC PCB, genius!!!

[@EasyElectronics2412]

I burst into laughter 😂😂😂😂🤣🤣🤣

[@akshitsharma2737]

and he gave us gerber file of dot pcb lol

[@LAZYLONER-]

@@akshitsharma2737 I didn't knew that,ha ha ha.

[@tbrandx2]

This is one of the best, if not the best video I've seen on Robot cars! Thank you!

[@DIYBuilder]

Thanks

[@rgmtb]

Great project man! Would love the code. Plz maybe better music next time or think about talking to us 👍👍

[@devitya859]

Can you tell me please do I have to order everything separately or will everything be provided in the box that i need?

[@fouzanjaved5441]

Sir, I love your videos about Arduino projects very much. Sir, you should make the 4 dof joystick-controlled robotic arm car project?

[@houarisaaidia4668]

28848988585554854210411758814844112741714141141114114

[@manofmesopotamia7602]

The only thing that confused me is: you said this video is sponsored by JLCPCB, while they send you perforated board 🤔

[@arjundevm7196]

Dotted pcb

[@_beans__]

Can I use cardboard instead of a bread board

[@SAHNI-um1jh]

Your video quality is nice

[@paktoysreview8377]

i like your effort dear

[@akasha9774]

Shalini we use nfr24L01 2.4ghz module

[@yashp]

hi, what did you use to build the schematic?

[@VeniceArte]

when do you plan to publish the correct receiver and transmitter codes?

[@vinay_dias]

Ye chutiya hai scam kuch provide nahi karta

[@ZoKes-e9l]

High, i have questions about, l298 Motor driver i am using the same as yours but it can only handle one DC MOTOR each side, do you have any suggestions?

[@lot10games]

Search on google "Four-way L9110S chip". The driver you see in video is also meant to be working with 2 DC motors only. The driver can be damaged.

[@abhajihadi]

He attached 2 motors at single side.

[@djedjexlol]

Hi bro ! nice work, rly like your video, Just a question : no BMS or protection for your 18650 CDR ? is it just for the purpose of the tutorial ? thank you for answering me, I would like to have the answer from an experienced person

[@virajchauhan6732]

I don't think you need a BMS for such small projects like these. The battery will be balanced already when it gets charged externally with its own charger.

[@sriaruledits]

This vedio code is correct or your downlode code link is correct Which is correct And the vedio code and your downloading code is different please. Reply make it fast

[@ameyahire1875]

Sir you have got this all Object in kit or you have bought it separately.

[@incredible2832]

Really nice project but I tried to make after every thing when I start the car the 2nd and 3rd motors are moving automatically

[@Davidso31]

The same problem

[@daniah.8113]

Hi, what size did you use for the dot perf board?

[@alejandroarielgarciaarriag568]

Oustatanding project as everyone that Ihave seen from your channel thanks for sharing.

[@DIYBuilder]

Thank you very much!

[@alejandroarielgarciaarriag568]

@Akh dzzz I thank you very much for the suggestion of this video.

[@BlueOctopusDev]

hey, what do think everything you used cost in total ? i think i'll do this project but i'm broke

[@matyibejo6353]

Great project, the only thing u messed up, that in the video u r uploading the transmitter to the car and the receiver to the joystick

[@neurosp]

How you power the Arduinos? Via vin pin? If so, do you have a voltage regulator there ?

[@iniyansaravanavel2954]

Do this project work with Arduino Uno and Arduino nano with old bootloader??

[@yannikcod8257]

yes it should work.

[@vidyashere7108]

Does you can make up a car which can be controlled by Bluetooth,remote contrll,obstacles detector,hand gesture,line folower.

[@vidyashere7108]

Arduino coding only

[@aryanagarwal8256]

Plz tell whether the pcb used is dot pcb

[@suspaul100]

awesome job bro.. u rock.. thanks for sharing the schematics and code.. i've designed a tank.. i intend to use ur code. the joy transmitter however has 1 joystick, and i need 2, 1 to control the motion and 1 to control 2 servos for turret motion. can u help??

[@tayyabanoorrizwan]

the transmitter will be connected to car or joystick ?

[@daniah.8113]

Can i use arduino uno instead? 🙏🏻

[@EasyOne]

Nicely done

[@DIYBuilder]

Thanks

[@sarkarsarkar8210]

Sir can you please tell me how u have uploaded the codes?

[@Clarence_13x]

Good video. Is there any way to replace the remote with an esp32 connected to gpt-4?

[@Adilkhan-hs7yq]

Can you make a project same as this for drone

[@kahosheshohe1320]

Can you arrange the pcb and keep it in the link so it will be the same size and we don't have to choose and make it easier for us and in that way you can get more likes and less unlikes

[@akulgupta3310]

Hey Can I supply power with 12v battery

[@croydon21H]

Hi, what s/w do you use to draw the schematic diagram?

[@valentinmartinez7293]

hello bro, I made your project and I have a problem, the 2 of the motors turn on when connecting the circuit and I checked the diagram and the code and I can't find the fault, apparently the rf24 modules don't link

[@DIYBuilder]

bro contact me on instagram

[@sLgcd]

i am having the same issue

[@angeloalferez9464]

did you fast forward the last part bro ? the testing part ?

[@lincolnhahn8609]

If I wanted to use better motors with three wires for this, could I do it if and how

[@electronic7979]

Nice project 👍

[@searchgrandacademy]

kzbin.info/door/_lkvX1qyF3L6dbopp1aQRw

[@yagneshwaranbrw]

Bro superb bro... Need more from u...😍

[@searchgrandacademy]

kzbin.info/door/_lkvX1qyF3L6dbopp1aQRw

[@MerVin-m7e]

what is the range of it ?

[@RayyanKhan-u5w]

please try to make an video for the same project but with timeout mechanism...

[@tanmaypatil7237]

Most satisfying video

[@MAX-ox3xh]

Hi can you make an Rc car controlled by the cheap VR wireless controller, the one with a single joystick. Would it be possible to read the data from that controller. I want that because it looks simple in design. Thank you!

[@kanhan4013]

Green sheet jo table ke upar he use ka kahate he please batao ... Muze lena he

[@3m_art001]

Great project Loved it

[@ericstricoff9284]

I cannot get an NFR24L01 module. They are unavailable at this time. Can I use ACERMIC 38kHz IR transmitter and receiver instead of the NFR24L01? Will the NFR libraries work for these modules, or do I need different libraries to make them work?

[@ozanmusk]

nice video budy thanks

[@Invention_of_zam]

Bro What Prototype Board you used in this video?

[@aswinkrishna204]

I am also trying this project .So in this L298N motor drive module can we use 4 motors at a time?

[@khalednazeh8669]

He connected every same side motors to the same output of the driver as they will always bs moving together forward or backward

[@priyankasridhar1531]

Sir we can use L293 motor drive sir?

[@CAG_9446]

I'm so lost when it comes to building the circuit. Are you just using jumper wires and headers, or do I need to buy something else to connect to my nano?

[@yannikcod8257]

you can simply connect it with jumperwires

[@kashobsaha4433]

Good job brother

[@mehmetalierdem2580]

it didnt work

[@bby256]

Your problem.

[@East_Coast510]

Damn

[@daniah.8113]

​@rimjhimbeats499 maybe he commented it so other viewers can be aware and the creator will fix it

[@akashgangurde1651]

Hii sir can I use one uno and one nano arduino board for this project . Will it work . If I use uno for car robot and nano for remote and use same code so can it will work

[@samyflies2]

yes you just need to change the board in tools\board

[@akashgangurde1651]

@@samyflies2 thanks sir

[@suchisubhrapaul2664]

will the codes we download be different for each type of thing we make? by the way thank you hope i succeed in making it

[@suchisubhrapaul2664]

@Akh dzzz alrightie then

[@m.chandrasekaran2514]

You are using only receiver on both modules, or am i wrong.i checked your description link too,but couldn't find a transmitter.

[@novato5106]

Late response probs wont help you but might help someone else, the module is transimitter AND receiver on the same module!

[@junaidtp9815]

Sir how much time run this car on these battery

[@ruvindurandeniya9741]

Transmitter code should be upload to remote's arduino and reciever code should be upload to car's arduino....Isn't it correct?? Can you explain me....plzzzz.....☺️☺️☺️

[@RaviKumar-rp1sj]

Yes video showing is confusing .....I made but not working..plz help

[@user-bv1tv9ef9y]

Is it possible to make it in away it has a camera on top, so you can see where it's driving from it's point of view?

[@dhitongszkietan5182]

I have uploaded the code but I am using Arduino uno it doesn't work. Is there something I have to adjust in the codes?

[@McMettie]

I don't know if it will work, but the input and output pins can mabey be adjusted. Because the name is diffretent on an uno.

[@funwithmaths1500]

kya aap contact no. de sakte h jisase aap bata sake ki code kaise upload krna h...sir please

[@rianrafi2944]

can we use Arduino uno on the car and nano on the transmitter?

[@victorhugovillalobosglez48]

congratulations new subscriber

[@gsk1595]

Title is worng "How to assemble"

[@gsk1595]

@Aadi Kulkarni my like

[@beutifulindia4094]

How you have made the receiver and transmitter

[@abdulraheemm5797]

What is the range of transmitter and receiver

[@sarkarsarkar8210]

And one thing more what is the range of transmitter and receiver?

[@shashankkanna5453]

23

[@mirohero5738]

@@shashankkanna5453 bananas?

[@prescriptions]

in case anybody is still wondering the answer to this, the receiver he's using claims to go 100 meters, and the one with the antenna claims 1000+ meters

[@jesusrealhernandez6567]

it work on mackbook?

[@sashankreddy9862]

Broo I have one dout can u pls make the joystick and guesture control car

[@WilsonNingthemchaOfficial]

How can i connect two servo motors for pan and tilt camera

[@shaneferdz82]

What's the range of the Transmitter?

[@cuarentenaviral4756]

Gracias, nos salvas a todos :D

[@Ajay20100000]

Can I use the same coding for a 12volt dc motor(775 motor)?

[@WebDepthMviewsyearsago]

Yes but 775 motor dont use it in car

[@Ajay20100000]

@@WebDepthMviewsyearsago Thank you, Then please give me a suggestion for the big motor?

[@WebDepthMviewsyearsago]

Yes

[@WebDepthMviewsyearsago]

You can buy bo motor

[@sLgcd]

Same thing happens on Uno as well. 2 wheels are working continuously. Nothing else happens. Please HELP!

[@dhyangundu9635]

it happens to me too

[@Davidso31]

The same

[@ramabhalla2968]

You have used which wire for gear motors

[@ghanashyampatel7007]

not working bro please help me i upload the code but the motor 1 automatically work. please help me bro .

[@ianyu4281]

the sudden music change annoy me but except that an exceptional video

[@aegalaxys3]

Can you make this with lora module for longer range?

[@deveshbharti8952]

What is the range of nrf24l01 module

[@mytechstudio9655]

What programming language use this project ?

[@sumitsinghthakur3669]

Bro can this chip use more heavy moter... Like major Project car moter

[@prasannarohit1238]

can you please tell me the controlling range of that rf and car , i am also looking forward to make such that car

[@donwatana917]

Why It is automatically move backward when I turn on the switch?

[@gltech2516]

same prob hope someone could help

[@maulanawahyudi7127]

really awesome project, I've tried it. But sometimes the values ​​of the X and Y axis are interchanged

[@yogustan]

Bro i too tried but car spining two wheels and not obeying joystick please tell me

[@maulanawahyudi7127]

@@yogustan I have corrected the coding above, the x or y axes were swapped and even corrected the way when turning. I also added a bell, lights, servo, and camera with esp32 cam

[@maulanawahyudi7127]

@@yogustan the problem with the x-axis and the y-axis sometimes being reversed is the delivery, as well as the time of receiving. Can be fixed by using insert at array index

[@yogustan]

Thanks bro

[@yogustan]

Bro can i get your insta id please , i have done everything but two wheels are spinning and obeying joystick controls , i have no idea to ask anybody so please help me i spent 10 days in this 🥺please bro

[@holtsff]

i have a doubt i think the gear motors are too slow can i use 775 motor///

[@deveshbharti8952]

If I use nrf24l01 pa lna then there will we some changes in code or not

[@sunitasharma8938]

If we use one arduino uno and one nano aur vice versa will it work?? And how much range it can fruitfully work.. Does using joystick and two arduinos at a time helps in the increment of speed of the RPM... plzz reply..🙏🙏

[@DIYBuilder]

Yes you can use the both Arduino nano and uno. It range is 10-20m without the antenna module. if you want to increase the range you can use the nRF with antenna module.

[@sunitasharma8938]

@@DIYBuilder no you are taking it in wrong way I am asking that if we use arduino nano in making transmitter and arduino uno for making receiver .. It will work or not..🙏

[@DIYBuilder]

Yeah it will work :)

[@Baihaqiken]

How can i do if i want to use rc car remote control ? is it a concept similar to a blutooth ?

[@dibyangshukashyap5412]

Kinda

[@kawior2018]

what is the range of the remote control?

[@harshgaming4313]

100m I think so

[@funwithmaths1500]

sir please can you tell me. how to find radio modula to which online site

[@pranavadya4518]

Bro is the motor driver size m3 sorry, I am new to this, pls respond as quickly as you can.

[@VireakDoungchet]

very good job. i like and i want to make it too.

[@khasimmohammad18]

Excellent

[@abhirams8838]

Which app you use for denoting the name of the components

[@rosinaappiah9222]

Can we use double sided tape

[@jaikrish50]

Bro u r dng wonderful job keep it up

[@DIYBuilder]

Thanks :)