RC Seaplane from the movie WATERWORLD SCRATCH BUILD MAIDEN. Full 3D printed Bambu Lab AERO PLA plane

[@MatthewMatBoon-ti5rj]

10/10 movie would recommend I love how they smokers are like pirates

[@franciscolobelo]

You are the most talented builder around. Really enjoy your video... Thanks!

[@markoroolaid]

Thank you so much

[@rail4299]

Really awesome plane, reminded me of when i would watch this movie all the time as a kid

[@markoroolaid]

Same story with me. And I really liked this movie.

[@jakerazmataz852]

Nice, everyone said that movie sucked. It's nice to see someone recognize it. It's sci fi/Action. I took it for what it was, and Jeanne was hot.

[@markoroolaid]

thank you so much

[@3drcking]

Nothing like sitting down, relax and watch your build videos! I'm glad this time you used mainly 3Dprinting, although I miss your use of other techniques combined. As always, it flew like a dream! Congrats!!

[@markoroolaid]

Thank you

[@kieren7763]

Awsome build was a perfect maiden flight aswell abit scary over water though

[@markoroolaid]

This is my first time flying on water and it's really scary, especially on the first flight :)

[@DroneTravel]

TOOOOO good to watch. Great performance. Thank you for sharing.

[@markoroolaid]

thank you so much

[@DroneTravel]

@@markoroolaid did you use infill while printing ? what was ypur settings ?

[@markoroolaid]

@@DroneTravel Hi. No infill, 0,4 nozzle. Layer height 0.2. Bambu Lab aero pla. Flow 0.6, temp 245. Fuselaga and pontoons wall 2 layers, bottom and top 0 layers. Wing and stab vase mode, bottom 2 layers.

[@markoroolaid]

and speed 50

[@DroneTravel]

@@markoroolaid awesome infos. Thanks 👍🫂

[@nilim9606]

another great achievement, congratulations, it makes you want to start 3D printing

[@markoroolaid]

Thank you so much

[@olisandy0]

Nice job and perfect first flight ! Thanks maestro

[@markoroolaid]

thank you

[@670mez]

Beautiful!

[@markoroolaid]

thank you so much

[@gavinlundie2310]

Outstanding workmanship!

[@markoroolaid]

😉thank you very much

[@倪棋龙-v6n]

This creation is amazing! Thank you for sharing the drawings!

[@markoroolaid]

you are welcome

[@aminto9448]

I'd love to see a more detailed showcase of the modelling and design process for your builds.

[@markoroolaid]

ok, I will consider your opinion in the next projects

[@willowehrich6207]

I second this notion@@markoroolaid

[@johan.mp4]

You're such a great designer and builder. It's always such a pleasure watching your builds. Everything you do seems "right" and you come up with such nice solutions to things that one would think are already solved problems.

[@markoroolaid]

thank you so much

[@EMTAx]

Nice flight

[@markoroolaid]

Thanks 🤟🤟🤟👍👍👍😁😁😁

[@AerialRCFun]

Awesome, thanks for your effort. I started printing this and it's looking great. Looking forward to flying off water soon, though with the weather getting colder, may have to wait for spring and maybe fly it off of ice or snow if the right conditions present themselves. Have printed fuelage 1 through 5 and wings 1 and two left and right. Everything is very simple and easy so far. The only part that was not as nice as yours is the fuselage 1, where the upper windshield curves meet the wing root. Some holes in this area and not a big deal, easily patched though I must try to figure out what to do to achieve the same result you made on this part.

[@markoroolaid]

Wow, very wonderful. I'm always very happy when someone uses my drawings and ideas :) By the way, I also had small holes there. I filled them with white car body filler. It was such a small job that it didn't make it into the video.

[@markoroolaid]

And be sure to share the process as well. I really enjoy watching. And be sure to build to the end and take flight too. This plane flies very wonderfully. Many here on youtube have started some of my projects, but I haven't seen any of the completed planes, nor in flight. Be the first

[@AerialRCFun]

@@markoroolaid Okay no worries then, just curious, very simple to fill anyway. I will definitely post my progress as soon as possble.

[@markoroolaid]

ok

[@spoxio6905]

It's great :)

[@markoroolaid]

thank you so much

[@keepyourairspeedup]

Landing and takeoff looked magnificent!

[@markoroolaid]

thanks

[@SomeGuyInSandy]

Nice!

[@markoroolaid]

Thank you very much

[@azadiIranaziz]

درودبرشما very very good

[@markoroolaid]

با تشکر فراوان از شما درود از استونی

[@azadiIranaziz]

@@markoroolaid فدات شم کاردرست فارسی نوشتی؟!!!! عاشق خلاقیتتم دست به خاک بزنی طلا میشه.دمت گرم

[@markoroolaid]

متشکرم

[@ThRoWeRRR]

In the future, you can also film the experiments, i think it would be interesting to see. Interesting idea to make hinges from glue. Thanks

[@markoroolaid]

OK, thanks

[@rckeith]

Great work as always. Nice landing for your first one.😁

[@markoroolaid]

Big thanks. At first, I was still very worried about how the takeoff and landing would work. But everything worked perfectly

[@Mouleybrown]

have to resize ???? all perimeters are not matching each stl file

[@Mouleybrown]

Have to resize??? Stl files

[@yusufyigit-muzik1511]

Hello. I'm building this plane for a school project. How many layers did you make the wing outer wall thickness when taking 3D prints? I printed part of the wing, but it looks a bit heavy. How many layers did you make the wall thickness in 3D printing? I would be happy if you give me information.

[@markoroolaid]

Hi, 0.4mm nozzle, wing 1 layer, fuselage 2 layers

[@MrColelol]

I would be interested in the TX/RX you are using along with the Battery.

[@markoroolaid]

I use a Futaba SZ18 transmitter and this aircraft had a Futaba R7006SB Receiver

[@arduav1]

Why didn’t you use spiral mode on the fuselage?

[@markoroolaid]

Fuselaga and pontoons wall 2 layers, bottom and top 0 layers. Wing and stab vase mode, bottom 2 layers.

[@droneforfun5384]

Looks very good! What filament are you using if I may ask? Thanks

[@markoroolaid]

Bambu Lab Naylon CF eu.store.bambulab.com/en-ee/collections/carbon-fiber-sale/products/paht-cf

[@estebanruiz5027]

What did you use to stick the lw pla parts? Ac glue or epoxy? Awesome project!

[@markoroolaid]

Hi, CA glue and activator, link here www.rotorama.com/product/power-fix-ca-pack-vterinove-lepidlo-r-s-h-20g-aktivator

[@vpx4991]

Hard work pays off ! Really love your videos ❤❤ i wish if i also had one of these . I have also tried to make planes ( micro planes ) by watching your video but never succeeded😢

[@markoroolaid]

thank you so much

[@yodaiam1000]

It is ugly and pretty all at the same time. Nice job!

[@markoroolaid]

That was exactly the point :)

[@kentadsbl565]

really cool plane i am thinking af making one on my P1P but i don´t seem to be able to find the controller to fly the plane i mean the joystick can you link to that ?

[@markoroolaid]

I guess you mean the RC transmitter. The link is not included as it is personal to each pilot and available at very different prices. A transmitter is not purchased for just one aircraft. But this plane needs at least a 4 channel transmitter.

[@kentadsbl565]

super thank you i have no idea what to look for can you recommend one? @@markoroolaid

[@markoroolaid]

@@kentadsbl565 This one is good for a start. www.lindinger.at/en/RC-ELECTRONICS/TRANSMITTERS/Transmitters/for-Aircraft/Flysky-i6X-Sender-mit-6-Kanal-Empfaenger/9796166 Later, if the interest in this field continues, you can look at better and more expensive transmitters

[@1bizjets]

Water world.

[@markoroolaid]

yep

[@tysonstephenson2181]

Where did you get your xmitter tray?

[@markoroolaid]

Hello I don't remember exactly, I ordered from a model store somewhere, as usual :)

[@knowledgebyte]

Nice job. I have a free 3DLabs Super cub printed. Now to add some floats and give that a go.

[@markoroolaid]

Yes, I know this project. At first I thought of making the same plane, but I thought little and decided that I would still make my own creation

[@knowledgebyte]

@@markoroolaid it’s a beauty

[@gagegr]

How do you like the Bambu? Is it your first printer? If not, what did you use before?

[@markoroolaid]

Hi, I have had Ender 5 plus and Qidi X plus before. However, Bambu is on a whole other level. This is the first printer that reminds me of a paper printer - out of the box, plug in and it works. It is a fast, quiet and extremely good quality printer. I highly recommend

[@gagegr]

I am considering it, but one of my kids loves to make large things (masks, costimes, etc). I would really love more build volume. Do you find yourself missing the Ender 5 Plus' build volume? I am waiting and hoping they release a Bambu XL.@@markoroolaid

[@rileytisue7014]

Do u think there will be a day where u commentate the videos?

[@markoroolaid]

All in good time :)

[@rileytisue7014]

@@markoroolaid that’s awesome to hear can’t wait

[@wernerpfeifer]

Grandios!!!

[@markoroolaid]

Thanks you

[@tvideo1189]

REALLY nice work! The only thing that would make this project even better would be a set of landing gear for land operation as well as the float version. People could build it as just a scale Helio for those without water access. Would make your work available to many more people.

[@markoroolaid]

Ok, thank you

[@coast219]

Where's the machinegun?

[@markoroolaid]

I forgot at home :)

[@coast219]

@@markoroolaid lol😄. Honestly, great build.

[@FlyBikeCampAK]

I so wanted this to be legit. He only made an airplane that looks like a Helio. The aircraft is missing so many key features that it is incapable of flying like the real McCoy. What a disappointment. Great use of a 3D printer though. I may have to consider that route instead of balsa.

[@TailSpinRCSpain]

Big error in that movie, aluminium doesn't rust, LOL.

[@markoroolaid]

yes, I was thinking the exact same thing when I started this project

[@О.Ш-ь1щ]

Sorry man... it's a shitlander in terms of paintjob

[@markoroolaid]

I have a feeling you haven't seen the movie Waterworld :), here's a picture of the plane that was in the movie sandiegoseaplanes.com/6.html