RC SCRAPPY Part-5, RC airplane building from scratch. 3M vinyl wrapping, 3D printed RC aircraft, DIY

[@BaltazarAlonso]

Espectacular!!!!!

[@markoroolaid]

Muchas gracias

[@JamesRCPlaneTech]

Flawless

[@markoroolaid]

thank you very much

[@bentlyair637]

Beautiful job! Can’t wait to see your maiden flight. Good luck.

[@mikalaitinen2976]

Wow! Nice builded plane!

[@markoroolaid]

thank you very much

[@AK2I47]

Stunning project! Looks like the real thing!

[@markoroolaid]

thanks

[@nicka9202]

So amazing. I watched every Mike Patey video probably 2-5 times, it just blows me away. You sir, are a master of your craft and you deserve a round of applause for your amazing and accurate recreation of the most badass bush plane.

[@markoroolaid]

thank you so much

[@Krash_fpv]

That power panel is sweet by far my favorite part....so clean

[@markoroolaid]

thanks

[@JohnMarchan]

amazing craftsmanship. Really beautiful work!

[@markoroolaid]

Thank you so much

[@wearemany73]

Absolute masterpiece! I love it. Scale suspension is superb, now to see how she flies. Has Mike Patey seen this yet? He's going to love it too.👍

[@markoroolaid]

thank you so much. I don't know if Mike Patey has seen this plane or not. He himself has not commented. But I really hope he likes this version of Scrappy

[@wearemany73]

@@markoroolaid Me too, I sent him a link. 😊

[@jean-philippestiee3527]

Very impressive and wonderful job! Motivation overload, thanks 😀

[@markoroolaid]

thank you

[@EMTAx]

Fabulous guy! 100% hand job🤙

[@markoroolaid]

Omg, thank you

[@jaycastello1171]

Excellent work. Can’t wait to see it fly!

[@ModSlash]

Simply fantastic! Looking forward to the maiden flight 😃

[@markoroolaid]

Thank you so much

[@christer8964]

Super nice! Looking forward to see it towing some gliders.

[@markoroolaid]

thanks

[@txgrunt5969]

This is so awesome! Great job on the bird! Cant wait to see the maiden flight

[@dutchloveRC]

Great work buddy!

[@markoroolaid]

thank you

[@thomasschmidt9281]

It looks like the Original. Absolute awsome Work

[@markoroolaid]

Thank you very much

[@furball5553]

Truly a pure work of art a absolute beauty 👍

[@markoroolaid]

thank you

[@MaratKo]

Cool👍

[@markoroolaid]

thanks

[@vitorpaixaofernandes1328]

Awesome!

[@markoroolaid]

Thank you

[@Lkjhgfds819]

Respekt lieber Marko! Von Dir kann sogar mancher vermeintliche Pedant noch einiges lernen! Erste Klasse, Deine Skills!

[@markoroolaid]

Vielen Dank. Ich freue mich, dass ich Ihnen behilflich sein konnte.

[@Art_N_Design]

I Iove your design another to

[@markoroolaid]

thank you so much

[@flytobi7834]

You did it! And really perfect. She is a beauty! All respect to you - i would love if i would have all this opportunities what you have to build a plane. Good job!

[@markoroolaid]

Thank you, thank you so much

[@oddworld9454]

Next level craftsmanship, inspires me to make better models, thank you 👍

[@markoroolaid]

Thank you very much

[@JanKowalskiOfficial]

14:37 You forgot to inflate tail tyre! Masterpiece anyway

[@markoroolaid]

you're right, the tire really sinks into the loess

[@markoroolaid]

And thank you so much too

[@kemalylmam8684]

🤩

[@rapinrapin7187]

👍👍👍❤

[@markoroolaid]

Thank you so much

[@HighwayDamage]

that is awesome, i have never seen such a complex hybrid build before and i'm doing rc modelism since 15 years. i hope you will post the maiden too ps: 10'000th subscriber, yay! :D

[@DamianReloaded]

Megacum!

[@ВикторПрокопюк-ъ1н]

Ну ты Марко даёшь,обалденный самолёт получился! Видео смотрел на одном дыхании! Когда ждать видео облёта?

[@markoroolaid]

Первый полет примерно в мае.

[@RodTerraa]

Amazing work! Congratulations!!! Would you recommend the 3m 2080 over the regular monokote/ultracote to wrap a regular balsa wood rc plane?

[@markoroolaid]

You cannot apply wrap to the balsa directly, the wood fibers show through. In this case, fiberglass must be applied on the balsa, but achieving a beautiful base is still difficult. With Oracover, the result is achieved much faster and the beautiful appearance is guaranteed . In addition, Oracover is considerably lighter

[@stevebarr9604]

So you even used the 3m wrap for covering the wing!

[@markoroolaid]

No, wing was covered Oracover- Light grey

[@olisandy0]

Fantastic job .. Very small regrets : engine spark plug not hidden and no special 4 blades home made shape ( later maybe to heaven touch). Hope you share (or sell) stl,plan and others... Bravo maestro 👍👏

[@markoroolaid]

thank you

[@RodTerraa]

Amazing! Is it too heavy compared to something like monokote?

[@markoroolaid]

Wrapping vinyl is definitely harder than monokote. But on a large plane, this is not critical

[@raptorheli2]

Awesome job, very different method to building this. Look forward to flying and curious what the AUW is? I may just have to make an electric one of these as my next build.

[@markoroolaid]

AUW is 10kg and thank you so much

[@JamesRCPlaneTech]

Why do you use the 3m vinyl wrap as opposed to the other “traditional” heat shrink covering materials for rc planes? Im wondering if the vinyl wrap would work on other build types like balsa kits that I build. Does it tighten up over open frame work like a wing or is it just for solid surfaces?

[@markoroolaid]

Oh, so many questions. But the situation is as follows: 1. Vinyl wrap is not heat shrinkable. 2. Vinyl wrap cannot be applied directly to the balsa, as the wood structure will show through. And besides, vinyl film is also much heavier than oracover covering film. 3. Oracover can't be put on 3d printed bodies, because they can't withstand the temperature of the effort intended for installation.

[@JamesRCPlaneTech]

Thanks for the reply. Interesting.

[@bobot021070]

Flight video please💕💕🙏

[@markoroolaid]

soon, soon

[@stevebarr9604]

Awesome build! What are you using for the covering materials?

[@markoroolaid]

Wing was covered Oracover and fuselage 3M wrapping vinyl

[@fumarco]

Hi there. Phenomenal job. Can you share de Fusion 360 files? Stls won't fit my machine a would like slice it other way. Thanks

[@markoroolaid]

Hi, look here grabcad.com/library/rc-scrappy-scale-1-3-1

[@RCnerd74]

Congrats to this great build😋 Now it's my part to finish my 2m RC SCRAPPY. What is that foam glue you use? Can you share a link or product name? Would be great. Looking forward to your maiden flight🤠

[@markoroolaid]

Hi, link here www.ceresit.ee/et/innovations/ceresit-ct-84-express-plus.html

[@RCnerd74]

@@markoroolaid Thanks Marko😃

[@LukasLampe]

this is fuken amazing

[@markoroolaid]

thank you very much

[@miltonginobricenomeza1754]

Excellent work with a lot of dedication, could you tell me where I can buy the front suspension system for this model, thank you very much for your experience.

[@markoroolaid]

I bought the shock absorbers from Lininger. I also rebuilt them, springs in. link www.lindinger.at/en/CARS-BOATS/CAR-SPARE-PARTS-AND-TUNING/RC4WD-KING-OFF-ROAD-SCALE-PIGGYBACK-SHOCKS-W-FAUX-RESERVOIR-110MM/9724283

[@Krash_fpv]

What engine did you end up going with

[@markoroolaid]

The same engine as in the video remains. NGH 35cc

[@Artat-home]

Did you use an OS engine and what's the AUW with a dry tank?

[@markoroolaid]

hi. NGH 35cc. AUW with a dry tank is 10kg

[@eisenschweinchen5354]

What's the price for something?

[@markoroolaid]

I can't tell, the wife also looks at the comments :);)

[@robieosborne7369]

I'll do $100 with shipping