Module Update Recommended • How to Flash Radiomaster TX16s Multi Protocol Module in EdgeTX

If you've updated EdgeTX recently and see a message on your model setup screen that says "Module Update Recommended" you need to watch this video.
MULTI-PROTOCOL FIRMWARE DOWNLOAD
► downloads.multi-module.org/?r...
RCVR CHANNEL LINKS
► Support the work I do here on Patreon: / rcvideoreviews
► RC Video Reviews Website: rcvideoreviews.com
► Discord - Hang out with the RCVR Crew: / discord
► RC Pilot T-Shirts! rcvideoreviews.creator-spring...
AFFILIATE LINKS
► Amazon Affiliate: amzn.to/3lEz5ZL
► Banggood Affiliate: www.banggood.com/custlink/3DD...
#RCVideoReviews #EdgeTX

[@mickelson8332]

Yet again, I search on KZbin for the answer and you always seem to pop up. Not only with the solution, but delivered perfectly. Anyone would think you have done this before John. Cheers, Mick UK

[@RCVideoReviews]

Thank you. Glad to be helpful.

[@SBWings]

Glad you updated this topic! Even though there are few differences between updating the MPM on EdgeTX and OpenTX, a few things have changed in the last year, like no longer having to pick between INV and NON-INV, etc. Thanks, John!

[@RCVideoReviews]

Yup, the software is just getting better all the time.

[@jamesceastep8874]

John: Another great job! Now I've got a bunch of catching up on your great videos to do on my Eachine TX16S, Radiomaster TX12, & Jumper T-Lite! Jim

[@RCVideoReviews]

Have fun and thanks for the comment.

[@MrVasmikey]

Great instructional video. I have recommended this radio to a few people and its nice to know they have a great resource to help them with upgrades.

[@RCVideoReviews]

Thanks for sharing information about the channel. Always appreciate the word of mouth.

[@MrVasmikey]

@@RCVideoReviews I finally got a back up Mark II and so far two of my flying buddies have purchased one of their own.

[@williamcox3852]

Another very good instructional video John. Keep up the good work.

[@RCVideoReviews]

Thanks, will do!

[@fly2me2day]

Brilliant. Clear and simple. Job done!

[@RCVideoReviews]

Thanks for watching. Glad to help.

[@pfeerick]

The main reason to update the MPM firmware to a version equal to or later than v1.3.3.0 (as this is the minimum version being looked for) is that v1.3.3.0 introduced the ability to query the MPM for the complete list of protocols, subprotocols and feature flags, meaning the from that version onwards the MPM tells EdgeTX what your module is capable of. i.e. you don't need update EdgeTX when a future MPM firmware introduces new protocols / subprotocols, which you would have had to do before. Another great instructional video... thanks! :)

[@graywoulf]

Thank you very much for this great tutorial! You are a most helpful person on the EdgeTX protocol. 👍👍

[@RCVideoReviews]

You're very welcome!

[@bstearn1653]

Excellent video. Thanks John.

[@RCVideoReviews]

Many thanks!

[@gleibercelis]

helped a lot, i didnt if edgetx internal module were the same as opentx

[@kenmorrow4624]

Hi John. Thanks for this video, I've been trying to find a video to update my old module version, great video easy to follow.

[@RCVideoReviews]

You're very welcome.

[@thegeneraljudge]

Awesome video's. Makes converting from Spektrum much easier. Thank you!!!

[@RCVideoReviews]

Glad to help!

[@stevebarrow3042]

Always nervous with updating firmware but this was straight forward, the webpage has changed now and asks for the Firmware Type, I chose Air. Another great video thanks :)

[@RCVideoReviews]

You're welcome.

[@wycliffeb]

Day two of watchingyour channel and once again your superb presentation has helped me out. Thanks again John. have a great day.

[@RCVideoReviews]

Great to hear! Glad to know my videos are helping.

[@swetunafpv1856]

you helped me with this one perfect thx

[@tungsten8290]

very helpful - thanks!

[@Rollo905]

Too coincidental! I just spent most of this afternoon working on this very issue. Glad to have this video for future reference though! Thanks.

[@RCVideoReviews]

Perfect!

[@newerarc4784]

Thank you for this video!

[@RCVideoReviews]

You're very welcome.

[@InRemoteControl]

thanks a million this helped me a ton!

[@RCVideoReviews]

You're very welcome.

[@flipfpv4539]

Good stuff 😊👍

[@RCVideoReviews]

Thanks for the visit

Vielen Dank, das hat mir schnell weiter geholfen.

[@RCVideoReviews]

Gern geschehen. Froh, dass ich Helfen kann.

[@samavella8831]

Thanks for the refresher! You mentioned that you had the link for the download in the description, but unless I’m totally out to lunch, I don’t see it anywhere

[@RCVideoReviews]

It's there now.

[@samavella8831]

@@RCVideoReviews Thank you 😎👍

[@F-ItSeNdItFPV]

thanks so much for the video it help.👍

[@RCVideoReviews]

You're very welcome. Thanks for leaving a comment.

[@alainrac56]

Thank you John, I made it! (but unfortunetly, my new Frsky R-XSR doesn't bind)

[@RCVideoReviews]

Try FrsSkyX2?

[@alainrac56]

@@RCVideoReviews yes I tried, and flashed the R-XSR to be sure it was ACCST and not ACCESS, and EULBT...PC's are a good way to waste a lot of time, but FRSKY made it even worse😒 Difficult for a 71 old modelist like me!

[@driova]

👍

[@lecturerchandarakhan1253]

Hello dear, I just bought one TX16S Mark II 4 in 1 but I cannot bind it to my flysky reciever FS-IA6B . The internal RF module status doesn't appear on the model set up. I don't know why. I did select Flsky2A and proceeded to binding but at the module status, it shows no multi-telemetry detected . Therefore, when I clicked bind. it did not bind to the receiver. Your help is really appreciated. Thanks

[@simonsutherland814]

Hi if your a mode 1 flyer which is the best serial bin file to use. Cheers Love your videos - top notch

[@iangrice5511]

HELLLLLPPPP, i am trying to upgrade elrs firmware on my tx16s internal elrs, ive just updated and copied firmware to firmware directory but on selecting dont get the option to flash bootloader, i get rename, copy or delete only'any ideas please? should add im a newbie at this cheers

[@joeg986]

My model status on the radio shows V1.3.3.0 AETR. Do I need to update? Thanks.

[@jimhilgeford6258]

Updated to 2.10.0. Then updated to 1.34.0. UMX Turbo Timer, I now RSSI and critical RSSI. Is there a problem with the Multi-module update? Thanks in advance,

[@beauthompson5338]

Hi John are the steps the same if you're doing this for an external module?

[@lajoskis5512]

Hi. I'm trying to update, but the message is error nosync. What could be the problem?

[@T418L]

I've done it before thanks to you (old guide), just quick note if you don't mind leave link to Multi Protocol Module firmware under your guide so other can jump there and download it, yeah some are lazy to google it and maybe get lost.

[@RCVideoReviews]

Link is in there now.

[@shaneintegra]

For the scripts do you completely replace the scripts folder or open up the newer one and drag and drop the LUA's in there

[@RCVideoReviews]

Drag and drop the new ones, it will overwrite old data. The MPM scripts do not include all scripts the radio ships with so if you delete the scripts folder, you'll have to replace stuff you may want.

[@organiccleanfoodconnection]

Hi. I have ajumper T16. Still on old jumper firmware. Would you suggest upgrading to the edge? Or stick with the old jumper. It looks like it’s not getting updated anymore or even exist.

[@bobflyer4346]

I too have the Jumper T16 and updated to Edge 2.8.5 works just fine. I also have the Jumper 4in1 installed at version 1.3.3.0 and is working with my toy quads. I would suggest doing a backup of you SD card, just in case something goes sideways. I had no issues. Happy Flying.

[@jimworley7385]

Hi John, a couple of my planes are still using Spektrum receivers. I am getting telemetry alarms soon after I take off. Is there a way with EdgeTX to calibrate the RF frequency? Jim

[@RCVideoReviews]

There is a frequency fine tune for protocols that support it. If the frequencyfine tune doesn't appear on the bind screen with the protocol selected then it's not supported.

[@jimworley7385]

Thanks! I’ll try just shutting them off. Range tests seem to be fine.

[@doublediamondrailroad5949]

Ok great. New EdgeTX TX16s coming tomorrow. Question: i have an E120 Heli that runs/Expects TAER. Then I have a second C189 MS500 RC ERA that I think is AETR. When you Choose Multi you can pick AETR (Default) or TAER or RETA. Since I need TAER for the E120 and I flash that. How do I deal with the other needing AETR. Saw notes about making it into whatever you need in Radio Channels? Thanks! 😊

[@RCVideoReviews]

I suggest you give this a read: www.multi-module.org/using-the-module/channel-order None of my RF tech has channel order requirements so I don't have practical knowledge on the issue.

[@doublediamondrailroad5949]

@@RCVideoReviews Great! Can use AETR Firmware and Radio Automaps to what model requires. Cool! 🙂

[@rpgfpv34]

just to clarify, this update will have NO bearing on receivers currently bound to the MPM, correct? i won't have to re-bind anything after this, right? cuz i have a lot...lol and thanks for all the great work you do to help all of us out here in RC Land...😁

[@RCVideoReviews]

No changes to your existing binds. I flashed my mpm four times for this video, once going backward to invoke the error message and have connected to two different planes since then. No issue.

[@rpgfpv34]

@@RCVideoReviews outstanding! looks like i have a little updating to do then...thanks again! cheers!

[@alainrac56]

Hello John, since I made the module update, when I select the bind on the radio, I have no more bips and it stops searching after 3-4 seconds...any idea? did I make a mistake somewhere?

[@RCVideoReviews]

Did you update your MPM firmware? I'm not sure if mine blips or not. Does it bind?

[@alainrac56]

@@RCVideoReviews no, can’t bind, even with dsmx rx who had no issue before to bind…

[@Tripkosh]

What is the Theme of OpenTx that you are using? i really like the red/Blue/White scheme... How do you install it? Thanx

[@RCVideoReviews]

It's not OpenTX, it's EdgeTX and I'm using the theme I made RCVR Patriotic available on the EdgeTX Github under themes.

[@Tripkosh]

@@RCVideoReviews Thanx, will try it for sure 😎

[@Mr_Meaty]

Hope you can help me. I have the Radiomaster TX12 mkii with the cc2500 mpm module. Went to update from the mpm site but there were 2 .bin listed, a 64kb and a normal one, and I didn't know which to use. I instead had EdgeTX Companion download all updates for it but I think it actually downloaded for a 4in1 module. Flashing it seems to have bricked my mpm, because now it says "no telemetry" where the version number should be, and trying to reflash with any other .bin it fails saying "FW update error device not responding" Any help would be appreciated.

[@RCVideoReviews]

The cc2500 isn't really an MPM module. In any case, it doesn't get the firmware from the MPM site.

[@shashichirme8216]

​@@RCVideoReviews Hii I'm facing the same problem. What am I supposed to do for flashing the firmware???

[@justintiller8454]

Why am I getting a “firmware update error Device not responding” ?

[@lawrencewilliams1477]

IS THE ECHINE TX16S THE SAME JUST WONDERING TO USE AND PROGRAM IN CHEERS

[@RCVideoReviews]

Identical

[@justinwhitehead7767]

What if mine isn't flash that update is needed? Although I definitely don't have the latest version loaded currently. Thanks in advance!

[@RCVideoReviews]

My advice is to review the changelog and see if there's anything introduce from the prior version you think you need. If there isn't, and your firmware isn't complaining, then it's ok to leave it as-is.

[@justinwhitehead7767]

@@RCVideoReviews awesome, gotcha. Thanks for the super quick response. Have a great week!

[@patrickgrimsley]

So if I have the elrs internal module would I still follow the multi module instructions?

[@RCVideoReviews]

No. You'd use ELRS upgrade processes.

[@patrickgrimsley]

@@RCVideoReviews thanks. I had figured it out luckily. Thank you. The video was waaay helpful. I had no idea I've been doing it wrong. And always Wondered why it never actually updated.

[@alexiscolonfpv3534]

can Radiomaster TX16s use two receiver at same time (one tbs and one FrSky)

[@RCVideoReviews]

Yes, but it can only take one telemetry stream at a time, so make sure to turn telemetry off for one of them.

[@alexiscolonfpv3534]

@@RCVideoReviews thanks

[@tsunami6253]

I tried using the DSM forward programming after all the updates and no dice. Any luck with you?

[@RCVideoReviews]

I don't use Spektrum/DSM. I've toyed with some off brand dsm protocol RXs but no regular usage.

[@tsunami6253]

@@RCVideoReviews Oh ok. I recently purchased an AeroScout and got some features to work but can’t turn them off. 😅 So I am locked in and changing between SAFE or AS3X..

[@thecutebros3005]

I got a No MULTI-TELEMETRY message after the firmware update...so not sure what happened

[@RCVideoReviews]

You probably got the wrong firmware: In this situation, one of the following may be the cause: The selected module is not installed - External is selected when Internal should be, or vice-versa The wrong firmware is installed on the module - the wrong radio firmware, or telemetry inversion setting was used The module is defective A somewhat common fault is bad solder joints on the 5-pin module bay connector

[@billbollinger7305]

hey i don,t have that fine tune for my receivers like your page,maybe cause i fly planes?

[@RCVideoReviews]

It's based on the protocol for the Rx, not the airframe. I did a frequency fine tune at the field for a plane today.

[@mikebollinger2835]

I am using the radio master r88

[@RCVideoReviews]

Frequency fine tune appears in the module configuration area when the protocol you chose supports it. If the protocol you're using doesn't support it, it won't be visible. i.e. Set the protocol to FrSky D16 and you'll see it show up.

[@ryanlemons3255]

Does it cause radio interference if the module is outdated?

[@RCVideoReviews]

I don't believe they change the fundamental operation of the module/frequencies with updates. If you want a 100% answer, you'll need to ask the MPM developers.

[@glyn903]

my jumper Tx16 says firmware update error, device not responding. edgetx is up to date. any fix for this?

[@RCVideoReviews]

You should join our discord to work this out. YT is a terrible platform for the inevitable back and forth required to solve this. What flash method did you attempt? What firmware did you use?

[@glyn903]

@@RCVideoReviews man.... I read yesterday afternoon that I have one of the late models that need hardware installed in the back of the radio to flash the module.... Looks like I will be upgrading to radiomaster TX16s. Lol. I just sold my XG14 (never really used) to fund the 16s. Greatly appreciate your videos though!!

[@RCVideoReviews]

Ahhh. I have never had a T16, so I'm not familiar with the ins and out. The TX16s MKII is really good. You should be able to repeat anything I demonstrate with a TX16s.

[@winstonsmith7801]

How do you update an external 4 in 1 module ?

[@RCVideoReviews]

Not sure. Don't own one.

[@winstonsmith7801]

@@RCVideoReviews No worries , thanks for the reply anyway.

[@winstonsmith7801]

@@RCVideoReviews I found the answer , I followed everything you said and at the end I just flashed the external module instead . All done , thanks for your video.

[@mathieusan]

What do the Lua scripts do?

[@RCVideoReviews]

They enable certain over the air capabilities like DSM forward programming.

[@pfeerick]

They also let you configure some aspects of the MPM, such as the ID it uses for binding (i.e. if you want to use two different MPMs to control your stuff without having to re-bind), and there are helper scripts that can name all your channels for you (useful if you are using some weird protocol for a miniquad or something and don't know what all the channels it supports are).

[@drewbooFPV]

What’s the root folder?

[@RCVideoReviews]

letmegooglethat.com/?q=what+is+the+root+folder