Red Eagle Model Hummer 3D EPP RC Plane Build Review

[@rayster57]

You've pointed out some excellent improvements. I've built a few of these EPP planes over the years and always end up adding extra carbon fiber flat stock, especially a 1/2" back from the trailing edges of the control surfaces. Start by throwing the directions in the garbage. If you're not in a hurry I've been using clear Gorilla glue, strong and stays somewhat flexible. Also GG won't hurt EPO.

[@RCVideoReviews]

Yeah, I love that Gorilla glue. I've built about 7 EPP planes and used CA on all of them (and Gorilla, Welders, and a couple of others). I'm going to maiden it as-is since it's a review channel. After that I'm sure I'll be shoring some of those surfaces up some. Appreciate the tips! Keep them coming.

[@rayster57]

@@RCVideoReviews Looking forward to the maiden flight. The airfoil wing will be a real experience on a small foamie.

[@WTJimmy]

Very clean, and well thought out assembly build. Really looking forward to see how the SunnySky performs on this airframe! 👍🏻

[@RCVideoReviews]

I have this image in my head of a team of horses pulling a mouse on a string.

[@jeffhampton8781]

I've had the Hummer for a while and was out flying it today to drain a 3000mAh 4S. Was pretty windy so the combination was a bit of a handful. My elevator hinge had ripped loose previously so it was reattached with Foam Tac. Decent 3D plane for $35 and when kept light.

[@RCVideoReviews]

It is fun for what it is. It's a good trainer. It'll definitely teach you.

[@johnvictorjacobson7933]

Nicely done neat and clean.

[@RCVideoReviews]

Thank you!

[@DavidReynolds-kr6yh]

Good tips on this plane. By the way 502 is lo time CA glue, just for your future reference. They should say CA glue, but I guess they assume people know that.

[@RCVideoReviews]

Wait, is lo time the same as thin? Or is that just a reference to the CA glue we generally use on RC planes? Thin, Medium, Thick? Does it matter?

[@DavidReynolds-kr6yh]

RC Video Reviews , sorry I should have auto checked my writing lol. 502 is loctite brand cyanoacrylate glue, just their normal thin CA glue, my bad lol.

[@RCVideoReviews]

@@DavidReynolds-kr6yh Ok, good to know. Thanks for the follow-up.

[@FL_Engineer]

Clean build given the challenges involved. I learned some simple tips that I'll apply to my next FT build.

[@RCVideoReviews]

Awesome, that's what it's about :)

[@enriquekramer4590]

Suggestion for the floppy rudder. Insert two CF or FG rods in an L shape. For reference, look at the HK Yak 55 or HK Wargo Yak. Amazing stiffness with little weight.

[@RCVideoReviews]

I'll try flying it as-is to evaluate it and go from there. Thanks for the tip.

[@christopherbell1768]

Great video. Lots of good tips. Looks good.

[@RCVideoReviews]

Thanks for watching!

[@lc6124]

Hello, thank you very much for the video. I purchased the HK version, the manual is no better, absolutely no mention of the rudder servo installation. Very nice build.

[@RCVideoReviews]

Glad it helped

[@roadstar499]

Yes,rudder needs added cf strips or something for sure..

[@RCVideoReviews]

Yup

[@tomheetderks9997]

Awesome, so happy you did this video, timing is great as I flew my friends (it is awesome) he sold me his extra kit. Excellent video as always -:)

[@RCVideoReviews]

Wow, that is good timing! I'm hoping to fly this one tomorrow. Good luck with your new plane, let me know how it works out and if you have any questions.

[@tomheetderks9997]

@@RCVideoReviews thanks, will do! Might be a few weeks before I get into it

[@tomheetderks9997]

Thanks! I'm about to build it soon, I can see what all of the wood pieces are for, with exception of 4 of the larger ones (all 4 identical)..they are not for landing gear, servo mounts, or pushrod mounts. they are sort of trapezoidal, with oval cut outs in the middle. Not sure if this makes sense? sorry, that's best I can explain without a pic. looks like its going to be pretty easy build, better than the value hobby profile plane I built- it worked, but also sad instructions, and a real pain to press through on my own. Your video does a great job explaining- thanks!!e

[@jhonepps6061fingers-wild]

Thanks the vid really helped me My wheel & motor mounts where 3d print lots of helpful tips love all your vid + great pegboard setup ..happy flying will look For more great vids Thanks

[@RCVideoReviews]

Glad it helped

[@dickwelty7205]

there are lots of SunSky motors what size did you use?

[@bhushandudhane96]

Really Thanks for your information and video 🥰🥰🥰.. 👍👍

[@RCVideoReviews]

My pleasure 😊

[@koalatails6391]

I had the same thought about reinforcing the rudder, so far the floppy control surfaces hasn’t bothered me. My electronics were also placed using a “try to make the wires neat” philosophy.I also placed everything on one side & the battery on the other. We probably read the same things regarding the CG. The instructions from HK are best described as “Vague”. Did you use the supplied rudder hinges? I used 2 x proper nylon hinges instead. I will be watching for any modifications, that I could copy.

[@RCVideoReviews]

I did use the paper hinges. Are you flying with CG on the spar? I'll fly it as is before deciding on reinforcements.

[@koalatails6391]

RC Video Reviews. Yes, my CG is on the spar. It probably needs the CG back a little to “harrier”, or it could be my lack of skill & confidence. I am pushing the limits of my skill with the hummer. Hopefully you will show me the further capabilities of this plane.

[@koalatails6391]

This weekend I will push myself to try higher rates. I have 3 sets programmed in my TX, & feel comfortable now, using only the mid rates. Ailerons 80%, elevator & rudder 70%, with about 35% expo.

[@RCVideoReviews]

@@koalatails6391 I flew it today. CG m-u-s-t g-o b-a-c-k. If you go to high rates move your expo up some. I think after flying this one today, I may lower my expo from 70% down to 50% on Ailerons and Elevator.

[@randyjohnson9125]

I know this plane should run about a pound, but I'm curious about the AUW with the rocket ship build.

[@RCVideoReviews]

Not sure, I actually gave this plane to Freddie to get him started on fixed wing. So I can't check...

[@airhammer6203]

Let's get tongue tied and twisted!😄 Very nice tips on the build. Thin CA is the only glue used?? Yes, I'd say it's very over powered. Do you think the motor heat will melt anything? Nice video. AirHammer out!!

[@RCVideoReviews]

I used thick CA on: - Wing halves - Wing and horizontal stab/elevator to fuse - Red fuselage reinforcing pieces - Servo plates - Control horn load spreaders I used thin on: - Rudder hinges - All fiberglass spars - Landing gear mount - Firewall The wing halves also got contact cement. I'm not worried about the motor heat. It's got a little hot to touch but moving air is a great insulator.

[@bradruffalo]

thanks for the great info and video.

[@RCVideoReviews]

You're welcome.

[@MrZeek101]

Great setup John cant wait to see this one in the air Take Care

[@RCVideoReviews]

It's ready to fly. Should be soon. Thanks for the comment. I don't recall seeing an entry from you in the discharger giveaway...?

[@MrZeek101]

@@RCVideoReviews Canada Eh

[@RCVideoReviews]

@@MrZeek101 Ahhh...Dang...

[@richardwebb8729]

☃️ Hello from snoey Mi ❄.

[@jaymierc6807]

Have u got a video of u building it ?

[@RCVideoReviews]

Not this one.

[@jaymierc6807]

@@RCVideoReviews do u know anyone who has as the instructions are terrible

[@loosein1]

ur the bomb buddy

[@RCVideoReviews]

Too kind..thanks :)

[@eteamjack1]

Your right instructions sucked. How did you get the assembled and glued wing to pass through the fuselage ? I couldn't had to glue wing halves together while passing through the fuselage otherwise the ailerons would have to be removed.

[@RCVideoReviews]

Been a while since I built this one--don't recall--sorry. Did you get it together? It's a fun little beater.