"I don't like combo edges, I always prefer plain edge." So Skeletool CX, problem solved
@ItachiUchiha-yz5nn4 жыл бұрын
I have a CX and I love it.
@nickg74984 жыл бұрын
@@ItachiUchiha-yz5nn me too im pretty new to the EDC world so I'm glad that my first buy wasn't a bad one.
@tulpa19403 жыл бұрын
Def best option. Been carrying a cx for years.
@misty_coolclub98462 жыл бұрын
I have the normal skeletool topo and I love sharpening knifes and has a professional sharpening kit that uses a belt sander type device so sharpening the serrated blade isn’t a problem but I also enjoy stone sharpening and you can’t really sharpen the serrated blade with a stone so if you can’t get a professional sharperi would recommend the cx
@BUZZKILLJRJR2 жыл бұрын
Same man I want a straight edge I hate serrated edges if they had a second blade that was serrated deal but I don't want or need it.i agree
@TheAustinCarmichael28 жыл бұрын
I've used the skeletool cx for EDC for over 5 years now and it has held up beautifully, the black coating is still there and hasn't worn noticeably, not a spec of rust, everything is still nice and tight. The only reason I would consider getting a new one is because mine is the original style where they made the cx a combo blade and now the cx has a straight blade which I prefer, but after 5 years of reliable service I couldn't ask for better tool (and I'm glad I sprung for the nice finish and 154CM blade).
@Roadblock7611 Жыл бұрын
I have the cx too I waited until i could find one with 154 over the 420. with 154 theres no debate on which one of these would be better. I see pros and cons of both but id still pick the cx but the reactor is only $23 so if someone didnt want to pay $90 its a solid option
@LEO1WOLF8 жыл бұрын
SOLD, "Skeletool" it is, thanks for the FANTASTIC REVIEW!
@donmadlung36428 жыл бұрын
I have a skeletool CX with 154cm straight blade..have had it for a few years and absolutely love it
@cameron1999cam7 жыл бұрын
154cm knife?
@siddepoo7 жыл бұрын
i think he meant 154mm
@ichhci19317 жыл бұрын
154CM = S30V Steel.
@Meloncholymadness4 жыл бұрын
@@ichhci1931 154CM does not equal S30V steel, S30V is better. Leatherman do offer one tool with S30V but it's pricey as Hell.
@augusth62447 жыл бұрын
Good comprehensive review. Really gave me an understanding of the quality involved, and the performance of the bitholder on the SOG was the deal breaker for me.
@Erin-Thor3 жыл бұрын
The warranty on the Leatherman was a dealbreaker for me.
@MrGabrielJude8 жыл бұрын
I carry both a Benchmade Barrage and the Leatherman skeletool. I started out making sure I had both in my EDC bag, slowly I noticed that if I needed to leave my EDC bag in the car and had to pocket either the Barrage or the Skeletool, I'd grab the Skeletool, because the knife is very useful and sturdy, I would have the utility, and cutting ability of my quality Benchmade. Just my voice to the choir of this nice vid thanks!
@redpanda19718 жыл бұрын
I've carried a Skeletool CX for the last couple years. It also hangs from a belt loop, using the carabiner, very effectively. I haven't dropped it yet, through all kinds of conditions. In Canada, they come with a Robertson bit, instead of Phillips. I actually bought a couple more & gifted them to co-workers.
@MetalMD718 жыл бұрын
I bought the Skeletool at Home Depot for $19.99! Of course I got 2!
@gideonstactical8 жыл бұрын
+jrrcmd Sick!
@desmondmoonbear95717 жыл бұрын
jrrcmd which f ing home depot tell me now
@ericm46587 жыл бұрын
I checked online...They're 29 right now in illinois by the looks of it That's half amazons price idk what hte fuck is going on there
@AlecBaldwin58167 жыл бұрын
Desmond moon bear *fucking
@TelxGaming7 жыл бұрын
How? They are $80+ everywhere I've seen them! :(
@yetinother8 жыл бұрын
Really like the comparison, good job on describing the handling issue i have found with many multitools, I have been edc'ing the leatherman wingman because it was really inexpensive a few years back and love the scissors for the work i do, wish it had the interchangeable bits though. Hope your pup heals up soon
@tyler63598 жыл бұрын
I love my wingman had it for 4 or 5 years now, works well for scouting purposes. I lost it once in a field while camping looked for hours that night it poured as well didn't find it till the next morning no rust, wiped it down and have it to this day.
@gideonstactical8 жыл бұрын
Now we are talking
@dank92886392 жыл бұрын
how is that wingman? I really want one, it's between skeletool and wingman for me.
@jimmelnyk75068 жыл бұрын
How dare you take the last Coke away from a pregnant lady!
@Mrb00st8 жыл бұрын
should've been like "I opened this for you!"
@dc763844 жыл бұрын
I like the leatherman lock system for the bits. Not solely depending on a magnet like the SOG or the Gerber Centerdrive.
@rawhideleather8 жыл бұрын
Recently purchased a Sog Reactor and sent it back immediately. It looked and felt too small (kid sized) and flimsy and the assisted main blade wouldn't fully deploy on it's own. I also saw a video where there is a problem with the bit spinning when clamped correctly between the plier jaws. Just didn't feel like a man's tool to me and I wouldn't trust it to do any real work. More of a gimmicky toy. If they had made this full sized with a bigger knife blade and sturdier then I think it would have been a big seller. As it is, I personally think it's a fail. Sog also really needs to come up with replaceable wire cutters like some Leatherman's & Gerber's have. Listening Sog? Looks cool though...
@HRradness3 жыл бұрын
Your review is really well done. Thanks for the side by side comparison, I’ll be getting the leatherman
@faethe0004 жыл бұрын
With the release of the CX and its better blade steel, the skeletool becomes an even better replacement for your folder.
@PatrickWagz7 жыл бұрын
Great review. I picked up the Skeletool last year, seems that I made the right choice.
@Forrest_Gee8 жыл бұрын
Most the problems you mention with the SOG are tradeoffs and minor problems, it is a compromise for the size and weight, it is about compactness.
@JimLBon7 жыл бұрын
Forrest Gee - actually use the tool. Blood-blisters from being repeatedly pinched by the tool and severe hand fatigue from having to squeeze the Reactor so hard to keep the bit from spinning while driving a fastener is a huge issue. Another benefit to the Leatherman is when it is unfolded in the driving position it works like an actual screwdriver as it was ergonomically designed to work that way. SOG multi-tools are for amateurs. Anyone doing real work will ditch it after trying a Swisstool, Gerber or especially a Leatherman. I say this with using these in trade work professionally for over ten years and having quickly ditched three different SOG tools on three separate occasions for being low quality in terms of usability.
@SurvivalZoneAfricaZA8 жыл бұрын
Thanks for your views! Good review! Thanks
@gideonstactical8 жыл бұрын
+Survival Zone Africa No problem
@butchtommasino Жыл бұрын
it feels like i have a pocketknife in my pants which is just awesome - wow great analysis... so valuable.
@lelandeggleston10418 жыл бұрын
I wear the Skeletool daily on my belt loop, it has become a part of me.
@cooldude37644 жыл бұрын
das hasguns I know the feeling. I feel naked if my Wave isn’t clipped onto my pocket.
@OtherThanIntendedPurpose8 жыл бұрын
I am a long time fan of Leatherman tools. I EDC 2 of them on my belt, as well as a micra on my wheelchair tool cluster. but I will always also carry a folder, when I am doing knife work, I like having a dedicated folder, and what I carry is a CKRT Hammond Cruiser. I prefer the longer, and heavier blade for cutting tasks. this was a good comparison, and when finances allow, I would like to pick a skelitool up. I do agree with you, I am a plain edge blade guy, not a fan of serrations. thanks for the information..
@pathrst8 жыл бұрын
All of sogs gear pliers have that travel problem with the handles. I have carried the Leatherman Skeletool cx for a long time which is at a higher price point by bit, but it is lighter than the skeletool and has a straight edge. that made it worth it to me. great comparison.
@yogililly8848 жыл бұрын
Have been considering going to multi for pliers but I carry the RAT2 with the SAK Harvester (discontinued).... my go to EDC use knife blade is the pruner on the harvester. The hook or talon style blade for piercing, box opening, store packages, wire separation, for removing (stripping) burial wire is hard to beat. For me to go to a one tool option the multi would need (2) blades with one being a pruner and need a wood saw plus awl. I just do not see not carrying a SAK, thus will always be 2 units but appreciate the time and honest review
@BUZZKILLJRJR2 жыл бұрын
I'm in the market for a new multi tool larger blade and changeable wire cutters teeth hope one of these has it. My multiplyer is getting old I love it but it's time to retire my Gerber multiplyer. And your the guy to watch because I agree on your knife selection and thinking process
@598Hans8 жыл бұрын
Hi man, I have Skeletool for two years now and I wouldn't change it for anything else. I have it in my EDC system and I just love this tool. But as you mentioned it's not good enough for hiking or some survival action. So I'm looking right now for another Letherman for more heavy-duty/survival needs. But for EDC in city is Skeletool THE BEST!!!
@rescueraver7 жыл бұрын
Jan Tschernoster try the Signal or my everyday work horse the Super Tool 300 I plan on getting the signal for outdoors but I just take my ST 300 right now. Both are great buys
@batman19763 Жыл бұрын
P4 or Charge TTI
@midwestoutdoorsman8 жыл бұрын
This also goes to show that a us made product can still be competitive in price, while being superior quality. we need to bring back the jobs to the us like keen has started to do with some of there boots and shoes.
@letsgeterdone_8 жыл бұрын
Dang it Aaron! Now you got me on Amazon again filling up my cart lol. Great video as always man.
@gideonstactical8 жыл бұрын
Thanks so much! And thanks for using the links! Helps the channel a lot!
@valentinlopez61893 жыл бұрын
Good review, I have the plain edge Skeletool which I love.
@outlawrallyrob8 жыл бұрын
Leather man every time
@BRIANVANDUYN4 жыл бұрын
The gears add clamping pressure for the pliers
@idrissamorehouse57763 жыл бұрын
Trying to choose A edc multi tool is really hard each company has good ideas -probably just gotta pick one and start field testing and decide over time -seems the LM won this round
@trezuraat8 жыл бұрын
Great review. There is another Skeletool model designated "CX", which utilizes better 154CM steel on the all straight-edge knife blade. Add carbon fiber inlays and $30 to the price, its my casual EDC. Thanks for the channel!
@nicholasmapes5 жыл бұрын
Can't go wrong with the CX!
@krazedkrane14138 жыл бұрын
I like how u have guns ammo and money on the table but she only cares about u drinking the coke xD
@brysonallen44968 жыл бұрын
Lowes has the skeletool for 25 I picked 2 up and they are a great piece of gear. I carry mine as an EDC
@gideonstactical8 жыл бұрын
+Bryson allen sweet!
@Nightknight1598 жыл бұрын
WHAT?! Why is are the the angle of the arms on that SOG so large?! Who's hand did they make that for, Galactus?!
@Tomyummmm8 жыл бұрын
I have the Skeletool CX! use it a lot and love it so much. only problem is learning to put a sharp edge on the 154cm blade on my worksharp field sharpener :/
@JimLBon7 жыл бұрын
Mervin Ling - I'm no blade expert but I also have problems maintaining an edge on the CX. 154cm blades in general, actually. The S30V edge on my Charge TTI takes and keeps a razor edge very well, however.
@batman19763 Жыл бұрын
Use Sharpal pocket sharpener works great. 6 functions
@Sheridantank4 жыл бұрын
I think the skeletool is the best pocket multi tool with the external blade and easy carry. It can replace a main pocket knife. I had one and I forget what happened to it.
@whatfreedom73 жыл бұрын
Do the leatherman bits grip screws well? I don’t like that you can only use leatherman brand bits where some other brands I could use Makita or any other brand that I know grips well and easy to purchase.
@josephfiori89246 жыл бұрын
Weedeater line is a GREAT cutting test I am a landscaper and I have to use the scissors on my leatherman I have the echo black diamond line from home depot
@palerider71713 жыл бұрын
The Skeletool is my next purchase. For me I was looking for a good EDC tool to replace my PST and yes I still EDC a PST. Like you I am going for the CX (maybe the RX) with its 154CM blade. That’s going to check the box for a knife with a more premium blade steel. Also there’s an aftermarket hammer attachment for the Skeletool that mimics the Signal’s function. You can extend the Skeletools capabilities by a mod to the Surge exchangeable file and saw. Will I replace carrying a larger blade for EDC, for the most part no. Could I and might carry the Skeletool as my only EDC? It nice to have that option if I choose. Aaron, thanks for the review and confirmation I am the right path there brother! God bless.
@luckymeziere36753 жыл бұрын
Id recommended the new leatherman bond it has the Same toolset as the PST but improved
@batman19763 Жыл бұрын
Where do you find hammer mod?
@palerider7171 Жыл бұрын
@@batman19763 so I went with the RX but never did the hammer attachment because I bought the MUT long tool set which can be used with the RX closed and adding the hammer would have negated that option. Btw I don’t know if you can get the MUT tool set anymore so the hammer might be a better choice for an available add on.
@theaveragewoodsman60028 жыл бұрын
Great video! You should do a video comparing multitools vs Swiss Army knives.
@Geared843 жыл бұрын
I use the Carabiner on my belt loop for when i have my phone in my pocket. And my Hinder Xm18 in my other pocker. I have the Skeletool CX and that 154 CM plain edge blade is mint on the CX and that Black n stainless look is awesome. Good Video
@Erin-Thor3 жыл бұрын
My experience with Leatherman makes me scared of them. Had a handle on a multitool collapse, as they are reputed to have a great warranty I thought no big deal. But Leatherman declined the warranty replacement, and I was out a c-note. Haven’t purchased another one of their products since. For those curious, they insisted the damage was not a defect, that I had applied too much force. Even though I insisted, truthfully, that I had squeezed the handle with one hand trying to clamp down on a bolt to remove it. I’d try a SOG over a Leatherman any day.
@GinEric848 жыл бұрын
Just a quick two cents, the skeletons cx that I own has a 154cm blade
@donmadlung36428 жыл бұрын
Also the new ones are not combo edge
@Dutch1911a18 жыл бұрын
Well played Sir!
@metal13wolfgang867 жыл бұрын
I'm a fan of leatherman multi tools and it's Made in USA I own 4 different kinds of leatherman tools and I wanna buy one more surge multitool.
@csheltn7 жыл бұрын
I used to edc a standard Skeletool and quit because the blade steel was complete and total garbage. I liked everything else but couldn't get over the blade steel, plus I do not like combo edges. I might one day try the plain edged 154CM version but I gave up EDCing the big multi tools and found I haven't missed one thing about them. My PM2, BM 940, 710, and 585 have been flawless EDCers.
@iphonemusings8 жыл бұрын
I have been edc,ing the skeletool since xmas, its nice. But I still carry 2 folders.... Blade addiction I guess :(
@dealhpig28 жыл бұрын
I'd really like to love the sog because I like the design and the features but they need to make some improvements.
@robinlarsson92793 жыл бұрын
Sog got stronger pliers thats why it dont need longer arm also is it onehand opening om this? If so i take sog. I have the skeletool already
@isabellam19362 жыл бұрын
The Skeletool has everything you need and nothing don’t, that’s why I love it and the superior quality of Leatherman. I’ve owned the SOG reactor too and the clip broke off and it’s just an inferior tool which is why they discontinued it. Sog does make some quality stuff but half of it is junk.
@Traderjoe8 жыл бұрын
I wish the Skeletool had the Juice's scissors. Even that Squirt has scissors. To me, I find myself using the knife first, pliers second and the screw drivers third and then the scissors. But given the option at the end of the video of the folder and multitool combo vs just the multitool, I am going for the stand alone folder and a secondary multitool. The combo multitool that omits the scissors is the deal breaker for me.
@MrRbillharz8 жыл бұрын
Both these tools (blades) are desigened for right handers. If the knife blade can't be quickly/easely accesed by a lefty(one handed) It's not going to replace a dedicated knife.
@HutchMatt2 жыл бұрын
Wish they were still $50!
@Davidow13 жыл бұрын
Being able to use standard bits with the SOG is a huge plus for me!
@Rushiswami11114 жыл бұрын
Is your dog injured on left hinter leg?
@kenstirling53483 жыл бұрын
I loved the SOG at first because of the spring assisted blade opening. Seems like leatherman wins in all other areas though. If leatherman would incorporate the spring assisted blade open with some of their better models like the sidekick it would be awesome.
@2772giggs4 жыл бұрын
Just a question, are the leatherman made in the USA, or assembled in the USA with blades and other parts made in china.
@JimLBon7 жыл бұрын
I have both tools. As a mechanic that routinely uses pliers and drivers there is no competition; Leatherman trumps all comers, especially on bits. The Leatherman flat bits are D2 tool steel and all of them grip like champs on any fastener. The shape and usability of the Leatherman is way superior to the SOG. The SOG plier head, compound leverage system and the blade shape are as good as the Leatherman, but in all else including ergonomics, usability, durability and materials the Leatherman is easily the clear winner.
@uiopuiop34723 жыл бұрын
reactor: im gay skeletol: im skeleton
@victorbedo72183 жыл бұрын
So just a multitool with a better knife?
@mikedifeo83448 жыл бұрын
I prefer Leatherman over SOG on all the multi tools. I have 4 models of each and I hardly carry the SOG. I think SOG tend to make gimmicky stuff whereas Leatherman makes a stronger better tool. Only advantage I see in SOG is the possibility of changing the configurations on their tools. You can do it with the Leatherman, but it takes 2 tools and special sockets to do it and you might loose your warranty.
@JimLBon7 жыл бұрын
mikedifeo - out of all of my friend who are into this stuff I'm the only professional wrench-turner. The only people I've ever met who like SOG multi-tools are amateurs and SEAL wannabes. Go do some work with it, then try any other major brand of multi-tool and see the light. I happen to agree with you; of all of them, Leatherman offers the best overall package in terms of quality, durability, usability and warranty coverage. I can't say enough good things about Leatherman. I'm surprised their warranty department doesn't know me by name yet.
@LukeMcFadden7 жыл бұрын
Random Question, what pants are those?
@randyyeager8 жыл бұрын
ok so it seems like your favoring the leatherman....1) the SOG has the same wire stripperon the cutters...you can see it in your video... 2) you talked about the short arm on the SOG...but you held it the opposite way you held the leatherman...aka...you held the short side on the leatherman against your palm...and you held the short side of the SOG away from your palm...I get you like leatherman better...I do as well....and I really like your reviews...but you kinda favored the leatherman here...review seemed a bit unfair to me...
@JimLBon7 жыл бұрын
Randy Yeager - this is why you shouldn't leave comments without actually using the tool first. The Reactor is ergonomically designed to be used the way he used it. Why would I know that? I own one. It's a pretty crappy tool. Ergonomics are awful, it's made from thin stamped metal and the driver feature is a joke. It's made for kids and amateurs. Try using both of these in a real working environment as a primary tool and only a crack-head will come away thinking that SOG has anything to offer in this realm. Swiss-tool, Gerber and Leatherman all have SOG whooped in this market.
@randyyeager7 жыл бұрын
naw...I'll comment when and how I please....if you noticed...I didn't say the SOG was better than the leatherman.....or even that it was a good tool...I just said his review seemed bias....you should really pay more attention before you comment on someone else's comment....
@JimLBon7 жыл бұрын
Wow, you sure told me. Man. I guess I'll just mail it in... You critiqued him based on flawed information because you have 0 knowledge of that which you criticized. Then made a judgement based on incorrect information obtained through nothing. Real clever.
@basicnaz7 жыл бұрын
Hey cool vid, what's the name of those camo gloves you're using?
@bugoutbuds87447 жыл бұрын
Does the bit have good retention in the storage holder of the reactor , I keep losing the one in my skeletool.
@mynamesnotimportant69414 жыл бұрын
Hmm. I have no problem with it on my wave+. I would've thought they would have the same retention. If I have any problems with it, it's that sometimes I can't get it out! 😂
@arand45 жыл бұрын
Ok the SOG Reactor will be Illegal in most of Europe because of the assisted opening blade Oh well, I'm going a very different way anyway, Sticking with Leatherman but going for the Surge.
@markmasonsusee52838 жыл бұрын
I have a Skeletool. I think it's awesome. but as looks go...the SOG looks way cooler.
@garypotter5569 Жыл бұрын
Yeah, Leatherman wins again. It's been lucky in a coupla things, but with the Skelatool it proved that it was genius.
@chrisu.k93074 жыл бұрын
What’s wrong with drinking soda?
@clancywiggum59404 жыл бұрын
Imagine watching this and still buying SOG
@valentinlopez61893 жыл бұрын
The plain edge is bit more expensive. However, in my opinion is more functional than the combo blade. The plain edge is a better steel.
@freddobbs94354 жыл бұрын
The SOG is very poorly designed and will not hold up, The Skeletool is like everything leatherman makes, very well thought out and very tough. will not let u down...
@andreribeiro22378 жыл бұрын
Skeletool all day long guys !!! Light and only has tools you need !!! I have yet, to find a better tool !!!
@juanriverarosa93718 жыл бұрын
Leatherman Rebar w/Cordura belt sheath + ESEE Zancudo + (Channellock 424 + Crescent pocket adjustable wrench both in a custom canvas pocket sheath) - the perfect combo for medium size hands/light duty every day needs. 👍🏼
@freman0078 жыл бұрын
I belt carry a Charge TTi and pocket a folder, at the moment a Cold Steel Spartan. I don't really notice the weight of them.
@gideonstactical8 жыл бұрын
Nice
@pentelred8 жыл бұрын
+gideonstactical what brand of pants are you wearing, they look awesome. also the s.o.g looks pretty but I doubt it could hold up.
@ChristianW19758 жыл бұрын
Great review, much appreciated !
@gideonstactical8 жыл бұрын
Thanks so much!
@helderdalvares7 жыл бұрын
I would like to make a correction to gideonstactical, certainly Leatherman is a great brand with high quality but the only American is the name, all their products are manufactured in CHINA and not in Oregon. Then is not better quality for being manufactured in USA. I would not mind to pay a bit more for an US product.
@Darkmattersfrank4 жыл бұрын
Nothing compares to Leatherman. However, buy what you can afford.
@bigchunk17 жыл бұрын
SOG has good design ideas, but what's with the safety? Leatherman has better overall tools IMO. Better construction for sure.
@Tom556D8 жыл бұрын
Sheefshoof? ......oh! Sheepsfoot! I get it now. Lol. Great video as always.
@refaiabdeen59434 жыл бұрын
Cheers Mate!
@Longestnamepossible5 жыл бұрын
"They will get the job done"
@dualsportoutdoors3 жыл бұрын
Leatherman wins hands down. SOG’s customer service is so bad that I will never buy another SOG product. Leatherman on the other hand has awesome service and seems to listen to what their customers want. Also, check out this guy’s video on adding a saw and file to the Skeletool. It’s awesome! kzbin.info/www/bejne/gXbYd5uYrbuqgbc
@Meloncholymadness4 жыл бұрын
Thing is, it's not truly American made, if you did some research you'd find that out. :)
@peterisrael20128 жыл бұрын
He has a kid on the way ? Boy or girl if so?
@gideonstactical8 жыл бұрын
Boy!
@peterisrael20128 жыл бұрын
gideonstactical Good on ya , you'll get a camping partner for life .
@ez_do_1028 жыл бұрын
+gideonstactical woa awesome congratulations !
@charles175082 жыл бұрын
I got my sublime green for 70 bucks
@DanBee1237 жыл бұрын
He's "really excited" to do this comparison??
@ziggylukins65543 жыл бұрын
Looks like you live I n colorado
@mattwebber31657 жыл бұрын
If you're using a skeletool please don't use it if you're in a rush, tired, it's dark or anytime when you need pliers because by not making the blade lock when the pliers open leatherman have demonstrated that they know nothing about multi-tool design. That tool is so unsafe, it's unbelievable. Imagine accidentally opening the blade as you fumble with the pliers then using your own grip to cut your own finger off. If you own a skeletool remove the blade and carry a folder. Your fingers will love you for it. Better yet - put it in the bin.
@---Michael---5 жыл бұрын
I think it's mostly about knowing how to use your stuff...
@kroon2757 жыл бұрын
Any1 else in the UK watching this can tell me where I could get the Sog Reactor for the kinda price this guy is talking about?
Why do you keep saying “this is going to be”? Is it not already?!
@trulsdirio5 жыл бұрын
Come on, with the SOG you complain about the liner could be thicker, but don't do the same on the Leatherman, you never struggle opening it, yet complain about the thumb stud, you have to align the bottle opener twice with either tool, but only nag the SOG for it. Overall I like the Leatherman better aswell, but that just is hypocritical. But that seems to be a running theme with you somehow..
@johnanthony88744 жыл бұрын
Wow Nutt’en you look different, where’s your black lab Tell Doodle I said what’s up.
@markadams75977 жыл бұрын
Great review. I don't like either of these tools. I'll keep watching for a better tool.
@iamfuckingyourwaifuandther27437 жыл бұрын
The bottle opener on the skeletool sucks. Most of the time you have to pull up twice on the cap just to get it to lift the cap off, but it works. Other than that my skeletool is my fav multitool so far, I just use the bottle opener on my leather man tread because I'm a tool.