Reading Ableton Locators in TouchOSC (Ultimate Guide to TouchOSC)

[@JoelFishel]

Hi Tim, managed to get this working and I'm thrilled - thank you so much! The only problem I'm worried about is, from my understanding, OSC messages have to be sent over an IP address which means being connected to wifi or cellular? I'm wanting a system that works offline with a USB to lightening connection. MIDI data transfers fine via the cable... There must be a way to get it to do the same with OSC and not need to enter ip address and port?

[@TimCorpus]

Have you tried setting the IP as a default address like 192.168.1.2 and testing if it connects between the computer and app when plugged in. You can keep wifi off the device to make sure it's using the cable.

[@JoelFishel]

@@TimCorpus Hmm, I've randomly chosen port to be 3333 and then I've used that default IP address on both my phone and the plugin but it's not sending the signals between each other. I had it working when WiFi was on though. It also seems that the plugin when placed on my master chain is now stopping audio from coming out (when I bypass it the master channel gets signal and when it's on it doesnt.. :S). I really want to get this all working through a wire - it'll be SO helpful for my live performances. Thanks for the help so far!

[@dominikgeyr8567]

Hi Tim, thank you so much. Would be so cool to get this to work, do you know if this also works on macOS with osculator? I just can't get it to work. I get the IP-Adress of my iPad under wifi settings, right?

[@TimCorpus]

I haven't tried with osculator, but some other similar software. Yes, the device IP address will be specific from the WIFI.

[@skdnv]

Hi! Is it possible to visualise ableton meters by OSC in app?

[@skdnv]

And other meters, like, for example, gain reduction in compressor?

[@TimCorpus]

Hah that's actually the next video coming out! Stay tuned

[@skdnv]

@@TimCorpus wow, great! Thank you))

[@ZbynekDrlik]

Hi, we are still looking for sync touchosc with ableton by some sync button on touchosc side. Now it is very annoying and risky sync multiple touchosc tablets with ableton later. Only reopen project, or midi mapping btn is sollution but thats not usable at all. Thanks for any help with that.

[@TimCorpus]

I don't understand your question, you're having problems connecting TouchOSC with Ableton?

[@ZbynekDrlik]

We have multiple faders controlled with touchosc in Ableton. When open touchosc fader on tablet is on possition 0 but in reallity in ableton is on 0db what is eg midi cc 108. So states are unsynced.