Reading Codes on my Foxbody Mustang - Idle Problem SOLVED! - TIPS04E68

Is your Foxbody running rough? Check out this video so you can see how to pull your engine codes and fix any issues you might be facing! Here is a link to a complete write up with all the ECC Codes: www.foxstang.com/reading-must...
///SUBSCRIBE
To My Channel! - Your Support Motivates!
///VISIT MY WEBSITES
theinfamousproject.com
dechmotorsport.com
///FOLLOW ON SOCIAL
/ theinfamousproject
/ theinfamousproject
/ infamousproject
/ theinfamousproject
///GEAR & EDITING
Camera: GoPro Hero7 Black
Accessories: GoPro Accessories Only (I'm brand loyal)
Mic: Rode Micro
Editing: Myself via Adobe Premier Pro
Music: elements.envato.com/audio
///TAGS
#checkengine #foxbody

[@GearHead704]

Wiring issues are always fun to track down. Bring some swag to Foxtoberfest if you can.

[@jasonthompson8479]

Too bad I am stuck here in Canada!

[@billymiller6081]

​@@jasonthompson8479 5

[@musclecarcamaroman9092]

Had a buddies MAF with a tucked wiring setup in the fender get wet in a storm on PowerTour and his fox really started running like crap. Got it dried out a wrapped it in a grocery bag and it ran normal again.🤪

[@jeremiahtown4055]

Good stuff !!!! Got me motivated have new parts on the way and turning some wrenchs today really hoping to get this going soon

[@rickgarza45]

That hood looks so dope an smooth with the shocks

[@dntlss]

I have 2 of these cars, a 89 and a 91, the 91 since new,first time i have seen that cover on the diagnostic ports, pretty neat, guess mine was taken off at the dealer or it just plain came without it,lol, i love my INNOVA scanner,33 bucks online,counting flashes is just not my thing,really helps out and pays for it almost immediately, next time one of these cars lands at the salvage (a rare occurrence these days) I'm gonna hunt for that little diagnostic ports cover. Another thing about the scanner is that it comes with a really cool book that has all your codes that way you dont have to be looking at your phone and searching for stuff, there are also several tests in the book you can run on the car like cylinder balance test and just a bunch of other stuff.

[@out_foxed_gt]

Love your videos keep up the great work!!👊🏻

[@TheInfamousProject]

Thanks man appreciate it

[@paulhudgins5120]

Great job Chris, it's always a wire that comes loose when the original wires get spliced into. Hopefully that took care of the problems.

[@Lxmustang805]

👍🏼👍🏼 great video..

[@robd-ue9hh]

need some help .. doing 5 speed swap in 88 lx convertible ... what about computer plus 02 sensor ... do i need to change ecm or keep the auto in there .. no mass air in car ... what happens if i put 1990 gt ecm in ... u are the man of all knowing can u help me please thanks Rob

[@nunya2814]

Soldier and heat shrink def the best way to splice.

[@TheInfamousProject]

Yep agreed... Now that everything is testing good I'll be cleaning up the connections and make it look factory

[@natejones963]

Whats it like to drive a bone stock coupe? I've never got to ride in a bone stock car besides 2.3T and a 255 auto car. Im looking at a coupe with 2.73s and bone stock other wise. 5 spd. Not sure on 2.73s......would have liked 3.08s or 3.27s

[@mustangjoe5048]

I have a 91 that has a check engine light on. Back in the day I had the scanner for these cars but that’s been lost or lent out years ago. I was trying to use my test light and I’m not getting what I think I should. When I jump the two wires then connect test light it’s on, I turn the key and it a bit brighter but then that it just stays on. Any ideas?

[@legit4083]

I bought my fox body couple weeks ago and it came with an aftermarket alarm system you think that’s a good cause why the car turns off on me??

[@gregbrigham3247]

I have 87 fox I'm getting code 94 and 44, 31 would any of these cause bucking ang hesitating any suggestions

[@jamesrene9378]

What would cause me not to get the “running codes” ? I can get the koko codes but when I turn car on for the codes it shuts off? Any ideas? Much appreciated

[@2.3fox]

Did you use the hood terminal

[@2.3fox]

What would happen if use the hood light one

[@TheInfamousProject]

You'll fry a trace wire in the computer and all your sensors will be pinned at 5v

[@toddsupraman7609]

I find a lot of broken wires in my old Mustang from people using butt connecters I swear by solder and heat stink

[@nothanks5652]

when the hell did they calibrate them to throttle bodies size? the 75mm is the size of the meter housing. all they ever did was tweak the transfer functions of voltage for the injectors, a band-aid compared to what's available these days

[@TheInfamousProject]

Well that makes more sense! The only reason I thought that is because the guy before me said he had the MAF calibrated for the upgraded throttle body despite the car having stock injectors?

[@jasonthompson8479]

Correct. Mass air flow are calibrated to injector. Throttle body does not come into factor however that is likely what info the guy may have passed along.

[@TheInfamousProject]

Ya it was on a completely stock motor too which really made no sense. All good

[@jasonthompson8479]

@@TheInfamousProject good find! That tape was hiding your issues!

[@automotiveaddiction428]

I was thinking about building an injection car...but the guy won't move off his 1500 dollar price..so for a car that I would have 2 build from scratch missing way to much.even though it's a T-top.its just not worth it..by the time I bought everything I could just buy a car.

[@Lar209209209]

I had same codes smh.. almost exact

[@mybannerisbetterthanyours]

what was yours doin? what fixed it??

[@chidrole]

👍🇨🇦

[@adammarshall4576]

LS3 swap that! aluminum block lighter than a 5.0! make it a evil sacralidge for Ford owners!! Cheap, light, reliable, crazy Hp in a small package drops right in there neat and tidy! Do one of those for a video the hate mail u would get 😂😂😂

[@automotiveaddiction428]

Lol..he would never..his cars all pretty much back to stock.with a or without a dech kit.

[@thomhagan8297]

Put an LS in a roller shitbox preferably a GM product. Why take a nice car and fuck it up to go faster with a most likely used engine and janky swap hookups.

[@adammarshall4576]

@@thomhagan8297 Haha see the hate 😂😂. Ford guy tried n true! All manufacturers make great products and all have their headaches! Appricate the love I knew that would come with the comment 😝

[@automotiveaddiction428]

@@adammarshall4576 lol..I'm not a ford guy..I have my mustang but also have my 6.0 chevy truck and a gmc duelly and a 77 f150...2 kia sportages.and a hyndia..I'm just a car junky no matter the brand.

[@thomhagan8297]

@@adammarshall4576 If theres any hate it's because I'm tired of hearing about it. I love all kinds of cars and my pride and joy is a super pristine 87 Grand National...and a friend sez to me yrs ago mind ya "you should put an LS in it" oh vey fer fuc sake lol. Sure, if I want to kill most of the value and heart of the car. Good Foxbodies are gaining in high value too and I grew up with them soo I just have a different perspective and expectaion out of them.