Readylift SST lift kit installation RAV4

[@JohnSmith-gr3lf]

Perfect pace, editing, camera angles, focus, details, and instructions..... PERFECT VIDEO..... There is still hope for our era, maybe even the next era !!!

[@mukansangarose4620]

Rggýgtesthbuu

[@shotgunscott]

You make it look pretty easy. I have a 4th generation RAV4, and the ground clearance is atrocious. Maybe I'll try this lift.

[@MC4D.]

Just bought a 08 Rav4 today, and this is a definite mod for mine. Thanks for this vid! You rock!

[@GolfinOutdoors]

Same here just got a 09

[@jscottsmiley]

@@GolfinOutdoors I’ll be interested in how it goes when you do it.

[@impactoman]

How did it go?

[@MC4D.]

I ended up installing the Northwoods Performance 1.5in lift spacer up front and the 1in on the rear. Combined with a set of Sach struts my Rav rides smooth. I'm gonna replace the rear spacer with NWPs 1in springs in the near future

[@johnanile1987]

What!?! I didn't know you did this. The RAV4 looks totally BOSS now! That father-in-law of yours seems like a smart dude. I totally want to do this on my Kia Forte.

[@kenvp_photo]

Gotta be one of the best vids I’ve watched of a mod installation!!! Thanks for sharing

[@kellstat]

Did you do before/after measurements? What point a to b did you use? What size of tires? Have you measured mpg before & after?

[@corpseplague]

@Creative Mechanic , ReadyLift website lists the part number as 53200 instead of 5320 for the 3rd gen model years. What is the main difference in the kits?

[@benjamincarver6131]

Thanks bud. Without this video I couldn’t have lifted by 2017 rav4 hybrid lol

[@sergiogodoy5224]

Ya instalado y con alineamiento y balanceo por que me qeda tritando cada vez q aceleró?

[@kamarti34]

I have a lift on my rav4 and the brackets for the sway bar link keeps breaking. Am on my 3rd one, Last one lasted about 10 months. And i dont take it off road. Any ideas what i can do to avoid this?

[@andreassenai9757]

I need that Stanley twist socket wrench

[@nolanturek3295]

You have helped me one step closer to my newly lifted horse i call Tory, and others call it a 2010 rav 4

[@yanglue611]

I do know that some thread lock doesn't allow it to lock completely and be more like anti-seized. Yes, anti-seized is pretty messy, but at least you know that you won't struggle that hard when access it again. I'm pretty spoiled with power tools and my dad always tell me to hand tightened at when bolts and nuts are snug.

[@tjstrato1]

Had this kit on my RAV4 for 2 years, the driver side swaybar endlink braket kept bending and rattling like crazy... The Rav4 being such a rough ride and uncomfortable seats I ended up taking the lift off and selling it. It wasn't really all that good for offroad other than dirt roads.

[@StaleBearFarts]

Completed The Ready Lift on my 2007 Rav Limited V6. Thanks for the video brother.

[@amielito7]

Hello will a 245/65/17 tyres fit with or with out lifter in my rav 4 2007

[@TowerCardReader2]

Great jack stand tip!

[@hugolafhugolaf]

Might’ve missed it, but aren’t the spacers made of aluminum? If so, will that not cause galvanic corrosion with the steel frame?

[@kg322]

What about a 2003? I just got one and would love a small lift.

[@ReZShot]

whats the comparison to this and the northwoods since you ran both?

[@nomadchad8243]

Alabama doesn't get much rust! Looks great, currently looking for a v6, I like my 2012 rav but I could use the 3500lb tow rating of the v6.

[@Timeforchangenow]

Go for the highlander 5000lb tow rating.

[@chrisjohns9631]

V6 is the boss. I got one for my wife, and it is streets ahead of the 4 cylinder.

[@davecroden9793]

Just letting me know that the lift kit from the post 2013 model fits our MKIII is worth it’s weight in gold. Genius! Thanks buddy, great lift

[@CreativeMechanic]

What is a MK111?

[@uploadtime1780]

@@CreativeMechanic third generation is what he means. Third gen RAV4.

[@thomasgraham5842]

I have a cool tip right from the get go , sorry but i have to say this , when releasing wheel nuts , instead of pulling upwords and risk hurting youre back , put the wheel brace on the other side of the nut and simply stand on it , you will find it much much easier to get them off . when you pull up on them that pressure is transferd to youre body , i always try to work smart not hard ..... plus a sore back is a great way to find easy ways to do things .

[@canyonero2050]

What size tires did you fit under with the lift

[@Justinds09]

I have a slight shimmy when I get around 6o mph after installing this kit on my 2016. Also the bracket connected to the driver side sway bar link is bent. Any ideas?

[@thayingxiong5975]

How's is it running now? I have 08 and wanted to rise it but I heard don't do because it cause more problem

[@daniellefrancisco17]

I like this subtle lift! Looks good!

[@celsodacosta10]

Do have any video lift about RAV4 2nd generation ?

[@dcarias23]

Hey man great video question, I have an 06 rav4 sport model. Can I install those same rims and tires without the lift?

[@CreativeMechanic]

Yes, they should fit fine

[@darwinsmith2286]

Very Nice. Very cool ride (love that color) and great video. I would have bought new complete struts, put the spacers on and swapped whole. Be interested in how CV joints are holding up and mileage.

[@CreativeMechanic]

10k miles later no issues. The thing is CV joints are gonna go bad eventually without a lift.. if I’m replacing at 40k instead of 60k I’m ok with that

[@or-ian6973]

What’s easier coil spacer or subframe spacer for the rear?

[@CreativeMechanic]

Neither… they both suck imo… but subframe spacer is less suck

[@CreativeMechanic]

Neither… they both suck imo… but subframe spacer is less suck

[@phillipgarvin3250]

where did you get your rimes i like them and how much i live in aus and tyres that you have on your rimes thay look good

[@demetrius8594]

no bump stop extensions with the kit?

[@francisdelgadoramos2254]

Hola sabes si hay para Rav 4 modelo 2008 4x2

[@Jerry13Only]

Looks dope, got me really wanting a Rav4 this year now! Did it affect your mpgs at all? If so by how much?

[@dronky700h6]

The question that I ask myself, what are the names of the tires on that rav4, they look like a truck, do they look good, what will they be ???

[@SedlakB]

Awesome video. I'd like to ask what struts and coils you use on your RAV4. Cheers

[@xBUSYWORKSx]

did you end up ever stacking the readylift spacers with the Northwoods kit?

[@DavidLee-ut9vh]

Did you notice a big difference in MPG with the lift and bigger tires?

[@CreativeMechanic]

The tires are only 1/2 inches bigger, but I lost about 2 mpg, but I’m still getting 25 on the highway so no complaints

[@awbernardy]

I have a 2012 RAV4 that I would love to put a little lift kit in.... think I need this kit... how much of a bigger tire could you put on after this lift kit ???

[@dhahdmoh9830]

would this kit work for the 2005 Rav4

[@皓瑋許]

Thanks.I like it. Can I ask a question? What the size for tires?

[@Morning1217]

C-Clamp! That's a good hack! Thanks the old man!

[@TheSwissCheese87]

Did you loose clearance moving to the Northwoods?

[@peterle8951]

Did you have to change the rear shocks or no?

[@CreativeMechanic]

No

[@peterle8951]

Curious, how long have you had it on the vehicle and were there any suspension issues?

[@grominwithrob1339]

Great video. I am looking to trade in my Corolla towards a RAV4 this spring. Looking at options for customization before purchase.

[@bryanmartinez4521]

Looks dope!! I just started driving and was lucky enough to get 2010 rav4 and i love it! I am planning on going with the northwoods performance lift kit, but i wanted to ask what rims and tires are those?

[@elpaz527]

What rims and tires are those ? I liked them for my RAV4 also

[@davecroden9793]

Great video that makes me want to crack on and lift mine too. Can I ask what tyres (brand & size) have you fitted. They look great 👍

[@victorpopukh5451]

What would you choose for rav4 2018 the ready lift kit or eibach coils for longevity of the vehicle, and axels? And would you do the wheel alignment after installation of either?

[@cisco00079]

Wow bro what a clip. Wish i can take my rav to you. 1 question tho can i still put those kind of wheels and tires on it even without a lift? Mines a 2015.

[@CreativeMechanic]

Yeah that size is only 1/2 inch taller so you shouldn’t need a lift. 235 60 r18

[@aaronmiranda7433]

hi i have v6 rav4 2010 limited like those rims and tires. can i know the brand both of them and is it possible i can put them without lift? ty in advance for your reply 😀

[@bradleybond615]

Can you send me a link for the lift…I have a 2011 and have been considering this for awhile now!

[@ManoloResina]

Donde puedo comprar ese kid de suspensión para montarselo al mio

[@EastCoastScott]

I'm curious as to how the ball and CV joints lasted and how is the ride? You're adding height on top of the strut so you are removing suspension droop to achieve the lift, but in doing so your making the ball joints and cv joints continuously operate a a more extreme angle potentially causing them to fail sooner. That's how it was in my truck when I had such a beast installed. Also, to anyone that does this, these are NOT LOADED ball joints, meaning the weight of the vehicle does not cause the ball joint to compress vs one that is loaded. This means that if the ball joint fails, it separate causing the wheel to lift away from the control arm vs a loaded one that keeps it all compressed so it will not separate. I've seen it happen a good few times so, keep an eye on your ball joints.

[@christopherwatchorn7014]

You mentioned when your truck had such a beast installed. Was that beast a 2" lift? Just curious... Angles are the key. There's a big difference from 4-6" lifts and a 2" lift.

[@nachoelcacho]

Hi, great vid thanks 4 sharing BTW, just wondering...how much ground clearance you gained...?

[@CreativeMechanic]

1.5 inches

[@CheddahSlingah]

@@CreativeMechanic Was that from the lift alone, or including the tires?

[@CreativeMechanic]

Tires were barely taller than stock

[@luisherrera7143]

How long is the 19mm socket to loosen nut from the rear suspension? Thanks a lot. very good the video

[@raiden25256666]

Will is work on a 2013 Rav4. If I want a 2 to 3inch lift?

[@calebwells5125]

Hey sorry to comment on a old video!! Your content inspired me to pull the trigger! My question is though did you have any experience with your cv joints binding while having this kit installed?? I have just installed the kit on my Gen 3 Rav4 V6 limited AWD (125k miles) and I am experiencing some harsh vibrations up front at 20mph to 25mph, and then at 75mph+ when accelerating . I have all new front and rear suspension components, and has been aligned plus tires balanced. It has the OEM cv axles😅😅and I am wondering if replacing those could remedy this issue!!!! Thoughts??? p.s. I know they'll wear premature but who doesn't love a lifted Ravioli🤩

[@CreativeMechanic]

Did the CV axels fix your issue?

[@calebwells5125]

@@CreativeMechanic no it did not sadly.

[@calebwells5125]

my rack and pinion was actually shot so i’m going to reinstall the lift and see if if that was the issue

[@calebwells5125]

So hopefully I no longer have the shake

[@alexz7111]

Good, you own some 1,5 inches. And now how do you expect to properly balance your front and rear axles so your tires be in norm and not to be like .... \ / that ?

[@CreativeMechanic]

You go to the shop and get an alignment.... easy.... child’s play... the manufacturer gives you new specs so everything is good

[@tonynguyen2117]

Hey there I just did this installation to my 2008 Toyota RAV4 and when I step on it the front end shakes. Did you have the same issue too??? I'm still running mines on the original Wheels

[@CreativeMechanic]

No, but check the torque on your strut towers and sway bar links

[@calebwells5125]

Hey I am having the same issue did you ever figure out what was wrong with it?

[@Daimxn]

​@@calebwells5125 Did u get an alignment?

[@israeljohnson2637]

What kind of ratchet is that? I need one

[@AmazianLinsation82]

Now you just need to add a chrome exhaust tip and this rav4 is gonna look MAD BOSS

[@realvoicevideos3402]

No dude

[@franciscocastro6772]

Nice ride! What size are your rims and tires? I’m thinking of doing a lift but I’m not sure what size tires and rims to go with?

[@christopherwatchorn7014]

I know this comment is a year old, but I'm also curious. From a comment below it looks like he went to 245/55R18's. He stated one inch bigger providing 1/2 of ground clearance.

[@jojojovy6241]

Hello these kits are efficient. How should I get it?

[@sprtn1172]

What are those spacers you installed for the cradle for?

[@adolfobaltazar119]

What is your wheel and tire set up ?

[@Dmp544]

Hola, no hablo inglés pero me gustaría que me ayudaras, tengo el kit de elevación pero necesito saber una medida,es donde va la barra estabilizadora y el amortiguador lleva una platina con dos huecos sabes la medida de largo entre hueco y hueco?

[@dirtsurf1]

Does this make the suspension softer or firmer? Any other things it does besides I assume slightly more top-heavy in corners.

[@CreativeMechanic]

Idk, I went from Readylift to this one. It rides better and takes weight better than Readylift

[@christopherwatchorn7014]

Won't be any different in ride quality. Still on the same struts, shocks, and springs. Unless you change those.

[@CreativeMechanic]

Yeah… the Northwoods lift kit is literally springs soo

[@sighermike]

What size tires did you install? And what make and model are they? That thing looks sweet. My son is buying a 2012 of the same color and we're looking at doing the same thing. Thanks

[@sebastianrosas3295]

Anyone know what size tires u could fit on a 2008 rav4 with this kit?

[@meateaterwhitetail7291]

Will this work good too on aftermarket Coiliver suspensions?? I own a 1st gen highlander. I Plan on buying megan racing street Coilovers from the 03 seinna application on my highlander. Then I plan on placing the lift kit spacers on top of the aftermarket coilovers...

[@CreativeMechanic]

I don’t understand why you would do this.... at all.... most of the performance handling you gain from the coil overs will be instantly negated by the lift...... but yeah. It should work fone

[@meateaterwhitetail7291]

@@CreativeMechanic I'm building it for off road. Theres not alot of aftermarket applicaple parts for the 1st gen highlander FWD. To use stiff Coilovers to improve handling off road. I need to use a lift kit to bring the height back to standard or .5 inches high from standard height. I'm running Black rhino rumble wheels 16x7 wrapped with 255/70/16F 245/70/16R BFG K02s. I was told the 1st gen Seinna suspensions would fit on the 1st gen highlander. I know most aftermarket Coilovers are Junk. But Megan racing is a great brand. I'm suprized that they make aftermarket Coilovers for the 1st gen Seinnas. I came up with this Idea. But Thanks for the answer.

[@dropx8987]

What’s the difference in ground clearance before/after? Will you get more clearance simply just by putting bigger tires on it without lift kit?

[@CreativeMechanic]

Yes, but a 1 inch bigger tire will only give you 1/2 inches of clearance

[@jessieguira5968]

If there's any way u think 2016 Nissan rouge sport 2.5 litter have ready lift to..any suggestions where to buy if they sell on sport rogue bro

[@twjkumliab7382]

It looks very nice on the road. Love it

[@skorpionas1]

can i find it in Europe ?

[@jesusalcazar733]

Great video tire size please and wheels !?? Iam going to do this on my thanks

[@WeldingFiend]

Saw you switched to the Northwoods lift. Are you still planning on posting a video of their system?

[@CreativeMechanic]

Yes I’m behind on editing all my footage

[@CreativeMechanic]

I’ll probably do a video on combining both lifts later on as well

[@WeldingFiend]

Awesome, can't wait for it to come out. I'm slowly getting into working on cars and am trying to gauge if this is beyond my skill level. Loved your first video - thanks for making this stuff.

[@CreativeMechanic]

I will say that I recommend the full kit from Northwoods with the shocks and springs. The kit is a little more involved, but with an older RAV4 it’s cheaper to get the Northwoods than the Readylift plus new shocks and springs.

[@WeldingFiend]

Thanks. I'm already leaning towards that since compressing springs on my own seems sketchy. I've got a 4.3 V6 like you so I'll likely be doing your exact install (minus the ReadyLift).

[@sanifkhan6956]

Need someone to do it for my RAV4. Looks awesome 💯

[@arthurwilson4974]

What kind of threadlocker did you use for the strut bolts?

[@CreativeMechanic]

Vibratite gel, it works well

[@jamal6509]

nice work dude. I think now I will try to do this with my toyota Urban cruiser

[@AWBOFCL]

How much thread are left on the rear subframe bolt

[@CreativeMechanic]

Which one? The one in the spring or the long bolt they provide?

[@AWBOFCL]

Rear spring bolt.

[@AWBOFCL]

I bought a kit but I feel like there is not much thread lift on the rear spring bolt

[@CreativeMechanic]

I felt the same, was gonna order a longer bolt if I ever reinstall the spacers, I’m currently running the Northwoods kit

[@aldokaloci2677]

Those left it's good for off road?

[@CreativeMechanic]

More ground clearance is a good thing

[@davidwayne9982]

I use to LOVE doing things like that-- but have to PAY someone now. I got mashed between 2 trucks in 99 an STILL getting over it-- so doing something like this is no longer going to be possible for me. I want one of these.. and was thinking of a bolt on supercharger too-- (just for gentle boost-- a root supercharger) and that will cost too..

[@goldshadow534]

How the kit still working?

[@AWBOFCL]

Can some send me pic of the u shape rear spacer. I feel like mine look diffeent

[@alexhaywood9706]

could go through some snow in E lock with that clearance.

[@kerniewilliams3030]

What are the rims on this rav4 called, love them

[@CreativeMechanic]

ATX Ravine. 18x8.5. 5x114.3 bolt pattern and +35 offset

[@kerniewilliams3030]

Creative Mechanic thank you

[@kerniewilliams3030]

Creative Mechanic would these be a perfect fit without a lift kit ? I have a 2011 rav4 and I’d love to get these rims for it

[@rgrrgrsxndngr1904]

Not sure if anyone has already asked this, do you think it be a dumbass move to try the Northwood Performance Off-Road kit with the Readylift spacers (minus the front Northwood spacers) ?

[@jordanmeek6610]

Great vid. Did you just use the custom springs? From what looked like, you didn't replace those, right?

[@logiqalone8249]

What tires and wheels do you have? Looks great!

[@iebah1]

Do you know if I can get one for my Lamborghini Gallardo?

[@CreativeMechanic]

Should fit. Minor trimming required

[@richarddrais8851]

Anyone lifted a 1999 rav4? Know were I can get a lift kit

[@JatinderSingh-jj5xi]

Good explanation. You covered every single thing. Thanks a lot

[@TheSwissCheese87]

Do you have a build thread?

[@coryshook7648]

Good job I like it! What size are those tires?

[@CreativeMechanic]

Not big 235/60 R18. 1/2” bigger than stock

[@danielg3078]

How bad did it affect the axle angles?

[@CreativeMechanic]

20k miles and so far so good

[@videomaker961]

Nice kit! But with all that work you could change the rubber boots from the front shock absorber...

[@CreativeMechanic]

No. Just wait and pull the whole CV

[@lucas_bryz]

What tires are those??

[@willbonilla294]

So this "will" work on a 15 LE ?? Been wanting to do for a while. Yours looks great,nice wheel pkge. Any info would be appreciated. Thx

[@CreativeMechanic]

Yes, confirm with Readylift if unsure. Wheels are ATX ravine 18” x 8.5 with a 35mm offset. Tires are Atturo Trailblade XT 235/60 r18

[@imcdonnell85]

Great video! Would this work on my 2011?

[@CreativeMechanic]

Yes

[@Naturestheway]

Great job and vid. Looking to get a Rav4 very soon!