Realistic Waterfall Wargaming Table

So this Waterfall wargaming table has some issues with varnish drying And i Show you Howw to fix the Error/Mistake this was because i was forced to use products im not used to using because of the current situation. but it all turned out great even though i felt like starting again at some points.
TO BUY MY SCENICS IN YOUR COUNTRY CLICK BELOW
UK : www.geekgaming.co.uk
UK Trade : geekgamingtrade.com/
EU : nextlevelboardgaming.com/
America And Canada Distributor www.geekgamingusa.com ( Sign up for trade at bottom of web site)
Australia : bit.ly/2wNTsvg (Get in contact for trade for Australia )
Mexico GAME SMART : bit.ly/33byNQX
__________________________________________________________________________________________
Buy Discounted GW And Other Leading Brands : elementgames.co.uk/?d=10400
My Patreon: www.patreon.com/lukesaps

[@nathanmiller4721]

Good to see my board being made in a video! And still looks good even though it’s intended for Wargaming. Thanks Luke 🤙🏼

[@nathanmiller4721]

Lukes Aps - Geek Gaming Scenics I have not received any emails from you sir, just checked.

[@nathanmiller4721]

Lukes Aps - Geek Gaming Scenics will do!

[@christianveeder589]

Hey there my wife is a hair stylist and when we saw you use the serrated scissors for texturing we had a lightbulb moment. Texturizing scissors!!! If you search hair sheers you’ll see some that have a comb like side. These help give hair texture and they’d work amazing for small reeds or foliage! Love your KZbin content and what you do. I hope that this can help you out.

[@RealTerrainHobbies]

Nothing like adding in some killer water scenics and having it ruined by a bad batch of product. Nice recovery, I would have been tempted to just walk away lol. That’s a great looking board Luke

[@RPArchiveOfficial]

Some neat tricks there as usual :) I need to adapt this technique at some point in future to make some modular height waterfalls for D&D to work with my modular systems (though I just know the thought of this and the gaps it would entail is killing your soul...) Also, I totally agree with your point of view on bringing the detail and realism from dioramas and railways to wargaming, your experiments with this sort of thing to add durability to things like seafoam are absolutely invaluable 👍

[@NatesMiniatures]

That waterfall looks majestic, thank you for this mate it is another video to chuck into the playlist.

[@jayarmstrong9504]

Looks great, only thing I might have done differently is use the clear water effect stuff, in a thin layer, behind the waterfalls so that cliff face looks all wet from the water fall/water seeping down

[@jayarmstrong9504]

@@GeekGamingScenics in that case, forget I said anything. Looks lush :)

[@icarusstudio6960]

You really do get me inspired Luke. Also your quick basing is a god send for an awesome first step when looking at a new army

[@icarusstudio6960]

I have started a Warhammer club with a mate. All the scenary is 40k style. Where would you start if you were me for some starter scenary, I want to use resin/water effects of that helps wittle things?

[@davidmcbride3843]

Love to see an artist at work. The finished product was awesome. Very nice.

[@92roadie]

youtube suggested this video to me, I can't believe you actually make this stuff, you have just blown my mind!

[@Zadster]

Blowtorch, not Bunsen burner - Bunsens are the things that sat on your chemistry bench at school. Er... that's it really! Absolutely stunning work, 15 minutes and I went from "oh hell i could never do that" to "I reckon I could do that". That has to be the mark of a good teacher. Soooperb! The person who commissioned this must be well chuffed. The only thing I would do different is paint the rock face immediately behind the waterfall a darker colour to make it look wet.

[@thra-x1855]

i don't think anything in this hobby makes me panic faster than resin that doesn't cure. thanks for the tip!

[@fredking7156]

hi luke i bought two Four to one Epoxy Resin they are could Norski they are to bottled containers is that ok for my River they are A and b containers fred

[@thomasbraden8242]

I like how calmly you handle mistakes. Woul love to see you do a larger table like this.

[@taylorthompson6092]

Splash effects can be much more easily done with clear hot-glue. Doesn’t require any thing but a torch and a couple sticks. It dries in seconds and will still take acrylic paint.

[@alvinmarcus5780]

I know one thing, your good at what you do and you have a awesome way to make a living. Just amazes me. Fun to watch.

[@roguishowl3915]

G’day Luke, loving the new look and the new channel design. Great work mate 👍🏻

[@lnrmodels]

I was priviledged to see this in person - it really is quite stunning. Nice beard continuity by the way ;)

[@sasserine]

What do you think he used for the reeds? ;P

[@RollforDamageRFD]

Beautiful work! Great recovery btw. I've had a project like that myself that the resin reacted badly to the varnish I used over it. Had to sand the resin and re-coat. That was a b.. Glad your smarter than me!

[@HerbertMiniatures]

Hi Luke, great video for scenic board building and really cool to see your creative process when handling something that didn't go quite right with the water effect :-)

[@nerdfatha]

Man, this was such a peaceful video and beautiful table. You were like the Bob Ross of terrain building.

[@optimus2200]

"I am Allergic to this so I use it with caution" proceed to poor it without a glove on XD XD XD

[@JamesSmith-co1kt]

If there is ever a huge mushroom cloud over in the UK, nobody panic! It's just Luke mixin up his modeling chemicals. Great job sir!!! Board is fantastic as always.

[@vicsminiatures7949]

Something to try is Mod Podge for the rapids. You can spread it on and then use an airbrush with air only and create the rapids you need and drys quickly and can easily be painted. Good work on the project.

[@patriciahamel5674]

If you want something that will trim things to different lengths, you want to order some thinning shears for hair cutting. What you used are pinking shears, which cut the same length, but with a zig zag edge. They are great for preventing fraying in fabric, but won't do what you wanted them to do. The thinning shears will though.

[@BroadswordWargaming]

Great video man. Don't pull the hair, there's not much left as it is!

[@TenaciousSnail]

Phenomenal looking board mate! Full of great tips as always, recently discovered your channel and loving the content. Very inspirational and practical. And top quality puns as well...buzz off!

[@radicalpaddyo]

Lovely stuff as always. Any plans to tackle the new GW tesseract glow paint? Dying to know your thoughts on it...

[@FacemeltsWasteland]

Luke mate, look up “pinking shears". That’ll give the effect you were looking for the those scissors.

[@AoSCoach]

Great tutorial and an even better save. I would have freaked out

[@elizabethmcglothlin5406]

Doesn't suck when the risky/experimental part comes at the end of a build? I'm a miniaturist--yep, dollhouses--but you have been a wonderful resource for landscaping and building. Like you, sometimes familiar products are hard to come by. Nerve wracking!

[@elquintodestino]

Como siempre te lo has currado un montón. Impresionante

[@MrMajikman1]

I like the color of the cliff and rocks. Do you have a video showing how you painted these cliffs?

[@geekfreak69]

Excellent tutorial on water effects Luke

[@jcjackson726]

Awesome! I was hoping you would do this. Thank you for the waterfall video!

[@rogermullins7877]

Another excellent video Luke. At approx.8:05 you said use either white spirit or IPA to soften the resin, to reduce spikes etc. As IPA evaporates faster than White Spirit could you not have used it to thin the resin initially, thus reducing the drying time?

[@rogermullins7877]

@@GeekGamingScenics Sorry. Same question but change the word resin to Clear fix.

[@tempest1261]

You should try using a pair of (Thinning shears/scissors) they would be perfect for cutting reeds really quickly and they are not too expensive.

[@HappyGnoux]

very nice results and thank you for all those tips!

[@johnschweiger1079]

Dude this is epic you inspire me so much

[@Seelenschmiede]

The fly clapping killed me. Nearly... 😋

[@michaellane7728]

Excellent work Luke more of the same please

[@Fr0z0rz]

Must have been awhile since I've watched your videos, old friend. Geek Gaming is new to me. Anyone talking about the ads, KZbin is claiming it's a bug - lots of producers are talking about it, and they're not adding or authorizing the 8,265 ads in a 3 minute video.

[@alanjennison5039]

Absolutely fantastic I love it very detailed on how you achieve the effects etc dont think ill be ready to do anything g like that 😀

[@idontwanttopickone]

Luke, I don't want to be that guy, when this piece is so beautiful and otherwise extremely well crafted.... but I think you need to think about water erosion a little more for future waterfall builds. There are a few little things in this build that are wrong in terms of realism/how water/waterfalls work. Water flows along the shortest lowest path and wears away the ground along its path. This is why the top of the waterfall looks wrong. Waterfalls always form a U shape in the land (when viewed from above), with the tips of the U being the outcroppings of land/stone and the base of the U being where the water drops down. The bottom of the waterfall should be deeper than the surrounding water as it is the area that is taking the most impact from the falling water and is the most warn away - the plunge pool. The rocks you have at the bottom should either have pools in them or be smaller, sharp and jagged if they have just fallen from the overhang above with pools around them and an indent on the side where the water is falling. Sorry, just some minor issues. I would recommend Googling for "geography of a waterfall" and looking at the images that come up. Lots of in-depth explanations of why waterfalls look the way they do and lots of things to learn from to create a more believable waterfall. Something like this might help explain what I mean: images.app.goo.gl/NkvLzoYNKRGpXUke6 I imagine most people will dismiss this by saying "it's a fantasy waterfall, who cares". But I know you are a perfectionist who always likes to improve his artform. So hopefully these little things will help you improve on an otherwise perfect waterfall build. Keep up the great work.

[@PatchGuilf]

What do you add to the resin to give the water a more silty/muddy finish? Would a blob of a brown paint along with the ink give that muddy river finish?

[@cabe_bedlam]

Yes mate! Cracking.

[@ronnocrd]

hairdressers thinning scissors will do what you wanted the serrated scissors to do. They have teeth on the blades and cut about half the hair leaving the rest long :)

[@wittyfpv]

hey mate first off i love ur videos and ideas, Im no longer a gamer but im a taxidermist and just found a product in the taxidermy industry called contour sheet, thought it would be something you might have a use or interest in in making scenes

[@evanhughes7609]

Splendid work - some terrific tips there. Thanks!

[@ImperialKneazle]

Fantastic layout, loved this, so very original.

[@ProfessorCharlesPorterfield]

Excellent build and video as always. Cheers!

[@tomoxberry2678]

Hi Luke, I'm new to all this and am fascinated by your talent. I want to get latex moulds for rock walls etc. I think you mentioned them previously, but I can't find the reference now. Help!!

[@HenrikLarssonArt]

Looks great, thanks for sharing - I got a table waiting to be transformed, can't wait to make a waterfall etc.. on it meself - Cheers!🍺

[@owenthomas7014]

Just watched a man trim his bush. 10/10 would trim again.

[@zippy5131]

Fantastic really fantastic.. I need to practice more. Love the mistakes and that you keep them in .. We all learn.. Cheers Luke..

[@donnagunn4124]

That's sick. I love it

[@brentleajunction]

Hi luke I really want to do something like this on my model railway I used varnish looks okay for my first attempt but now I want to change it all will you be doing anymore model railway stuff again cheers Paul

[@piet3798]

Schöne grüße aus Deutschland. Ich schau jedes Video von dir an. Du machst echt coole Dioramas. Und ich baue auch eine Landschaft in 1:32. Und wende deine Tipps an. Mfg Piet😎

[@Caradea]

Maybe you could use some hair thinning scissors to trim the reeds? It doesn't cut as much in one go though.

[@HyperRealitySuperFun]

I love your water videos

[@wassz]

What product did you use for water ripples besides white spirit?

[@simonmoss101]

Looks awesome and thanks for sharing.

[@moatopia]

Is there a video for making the board itself, I am looking to do something similar for my tournament display board.

[@jamesmsilsby6123]

I know this question doesnt apply here, but where can i get seafoam sprigs?

[@loupiscanis9449]

Cheer's Luke .

[@TheLoremistress]

Looks good mate

[@sS0ulSs]

This is crazy work my dude

[@magicworldbyjorg]

cool video keep up the great content.

[@Longo556]

Does anyone know what the US’s Clear Fix equivalent is?

[@crystallauster9365]

Love your work but can never get the products here in the states

[@madonnadove]

Fantastic job! I love it!

[@wernerdenil2279]

Finally some decent music in you vid :) A+!

[@johnmason6625]

Hi Luke, I keep having trouble with your website, I keep dropping the connection. I have tried google and safari but keep loosing it which is a pain because I want some flocking and other items. Do you have any suggestions, has it happened to other people. Regards John

[@thomaswalla4210]

Thanks for showing your technique is real helpfull!

[@ohneMofa007]

Cool, cheers from Berlin Germany

[@busybuzzshop5662]

What was the clear stuff used for water fall?

[@robertcoble1445]

Awesome mate cheers.

[@brushhammerdice4438]

stunning!

[@streamgawd1791]

extremely dope video. Thug life!

[@Cloudy0w0]

Does the stuff you made the waterfall with yellow over time?

[@Cloudy0w0]

@@GeekGamingScenics Cheers

[@crystalclearchaos5387]

Did you change your channel name

[@nigellacey8505]

Hi ,can you advise the best place to buy xps foam sheets please in the UK ? cheers

[@nigellacey8505]

@@GeekGamingScenics many thanks. Is the foam on Panel systems easier to cut through and work with compared with the denser bluefoam material? many thanks

[@nigellacey8505]

@@GeekGamingScenics All sorted thanks for your help cheers

[@adamsauve]

I've always wanted to build a wargaming table with a centerpiece of a half damaged bridge. I am not half the artist you are though :(

[@leddyxart6339]

very nice job

[@seriouslycoolful]

Hairdressers thinning scissors might work instead of the corrugated scissors

[@saul1463]

Great video!

[@marklockwood2693]

Fantastic!

[@Caddy666]

looks great, but the top water is flowing slower than the bottom

[@sturmstorm]

daaamn!! Noice!

[@dansemacabre5123]

It's not a fly - it's a Tyranid invasion!

[@EskenRock]

Resin clear spray paint and some patients adding layers will fix the fake water.

[@adriancooke9122]

Hi to... Black Magic Craft, Luke’s Aps - Geek Gaming Scenics, Midwinter Minis and Wyloch’s Armory. I want to issue you 4 with a challenge, if I may... CLOUDS / TWISTERS / WIND EFFECTS UNDER FLYING MODELS!?! I have been looking at a lot of sites and KZbin vids but they all seem to focus on explosions or fire markers and not figures that are on clear plastic supports, like Kroak or “gravtanks”. I didn’t just want to use cotton wool as it is very white and a little un-realistic. When you look at something that hovers it also kicks up a bit of dust and debris but I have found this difficult to achieve and have it look good / realistic! Any chance the four of you could give things a go with a vid of your findings / ideas / suggestions on how to make a flying model look more like it’s flying / hovering, please? P.S. Great to see all of you posting again under these difficult circumstances!

[@zhhrah]

Luv luv luv

[@brickzandstickz2749]

I like your beard

[@yerushalaimnehereset]

Like the board itself. but the water is waaaaaaaay too dark.

[@gregbeatty5638]

👍

[@vorno102]

That'sa blowtorch, not a bunsen burner.

[@andytate5670]

the problem with clear fix is getting it.

[@waynewayoaveyard9397]

What are you even talking about! you never fold resin unless you have a vacuum chamber, the resin didnt set because the harderner wasnt mixed in well with the resin fully and the heat is only there to pop the bubbles......the resin is a thermal reaction too much heat and it will crack or set on fire. is this the first time you using resin because everything you have said is wrong.

[@waynewayoaveyard9397]

@@GeekGamingScenics Polyurethane is a type of resin mate 100% if its the liquid plastic. resin doesnt need external heat to set. its a chemical reaction thats why you have part A and part B, the casting resin and the hardener. people use blow torches only to pop the bubbles if they dont have a vacuum chamber. if you didnt add the hardener it would never harden despite adding as much heat as you wanted.

[@ryankrankowski7777]

I just found my new online id. “SwishySwashyMotions”.

[@carminethewolf]

Tha's reight bodged that'un, ya daft apath...

[@lukemcdonladson6648]

👍😁💚