Reasons Why We Prefer Enphase IQ Batteries 5p

At Cutler Bay Solar Solutions we prefer Enphase products above the rest.
Here's our top reasons why their IQ Batteries are our top choice.
www.cbsolar.miami

[@mojojojo_BB]

This is a very good explanation of the Enphase system - much better then they do on their own website.

[@PSIGigantor]

Really well spoken gentlemen. Thanks for the video.

[@PeaceChanel]

Thank You Everybody for All that you are doing for our Planet Earth.. Peace Shalom Salam Namaste 🙏🏻 😊 🌈 ✌ ☮ ❤ 🕊

[@scottparker4337]

Is there a way to have 60 panels with IQ8A and 5P batteries all part of the whole house system and not be a split system?

[@njper123]

Enphase’s ac topology is relatively safer but limiting in my view. Having access to dc power allows for considerably more efficient energy management technology to be developed - such as dc coupled batteries. Roof top safety can be achieved via optimisers as well - safe dc and arc prevention

[@johnperez8156]

What copper wire size should I use from the IQ Controller 3G to 4 5P batteries? Currently thinking about mounting the batteries around 50 ft away from the controller.

[@savagecub]

Hey ! Can you amigos come up to Melbourne and install two 5p batteries for me ? I already have Enphase panels.

[@hgillung]

I had an Enphase system, 11 395 Panels with IQ-8 MicroInverters installed in May 2023. That system also included a System II Controller but it has not yet been installed. I am looking to add batteries. I installed a soft start kit on my 3.5-ton AC, that took the full amp load from 114 amps to 29 amps. My goal is to eventually go off-grid. However, I do not see how I can power my whole house in either a grid-down or off-grid scenario as I have been told I can only have 4 120-volt circuits in my subpanel with the System II Controller. My question is, is it possible with enough solar panels and battery backup to power my whole house? I realize I also need a generator to cover when the sun does not shine. Ideally, I would like the generator to only charge the batteries, not run the house. Is this possible? Thank you

[@ryanyoder7573]

I’d look at the Franklin WH battery. It’s AC coupled and can power your whole house especially with 2 batteries.

[@AgentOffice]

You can do full backup. The 4 are things to shed

[@vinay8429]

Do these batteries work with any solar installation or only ones that use enphase microinverters ? I have SunPower panels, trying to see if this works with those or not.

[@Eireternal]

Sunpowers panels literally use Enphase's microinverters.

[@savagecub]

Okay that’s not completely accurate about using your ev. Your Ev has to allow for bidirectional charging in order for that to happen. Currently Tesla does not allow for that except in the Cybertruck and who can afford one of those ?

[@KieranMullen]

Enphase makes their batteries? Hmm

[@TurreTuntematon]

It’s an Enphase product. Does Apple make it’s batteries? No.

[@HelmutTschemernjak]

Enphase has developed everything around the batteries: - BMS battery controller made by Enphase - Battery main board and PLC made by Enphase - IQ-Gateway (Envoy) main controller made by Enphase - Housing, cooling made by Enphase only the battery itself are made by CATL See the video Enphase Battery Inside on youtube.

[@punksjutgbd]

Why does it matter what an installer prefers? It's up to the homeowner and what they want on their property for the next 25 years or so.

[@samuelpierog1302]

True but Installers have to stand behing their product. If you are choosing a good installer, they will be servicing the system if and when needed so they are incentivized to recommend equipment that they are confident will not malfunction.

[@punksjutgbd]

@@samuelpierog1302 but installers only service what they know. I'm calling for broader knowledge. RE+ shows great products every year especially this year. But installers still only know and preach Enphase. Time to offer customers newer products from different manufacturers and let the customer decide what they want.

[@LifeLongLearner-om8jx]

Because reliable installers will typically only install the most reliable parts and systems. So when pairing batteries with solar energy the input from the company you expect to maintain the system it should matter what they think. Doesn’t mean it’s the only thing that matters but it’s something to keep in mind.

[@AgentOffice]

@@samuelpierog1302 most will change names or disappear

[@sh0cktim3]

If customer wants a inferior product by all means its your money and I guarantee they will take it.

[@chuksobi593]

Lol, clueless dudes