Red Sea - Official Demo Video

Introducing the Red Sea, an all analog signal routing matrix designed for countless stereo and mono signal path routing options.
The Red Sea gives you the ability to run a FULL Stereo wet dry wet rig using only 2 amps or just 2 signals to the FOH, while also giving you complete control over your wet/dry mix!
The Red Sea also has two independent stereo FX loops. Use each FX loop to run stereo delay's and reverb's in parallel, where each effect does not interact with each other. Huge soundscapes can be achieved with washy reverbs and articulate delay repeats while being able to blend between each FX loops mix level.
The Red Sea can also do the following routing options:
✧ Wet | Dry utilizing a single amp
✧ Clean Wet | Dry | Wet (drives DO NOT run into wet effects)
✧ Wet | Dry | Wet with dual delays (one in the L channel & other in R channel)
✧ Parallel Dual Amps (run dual amp modelers in FULL stereo)
✧ Convert a tube amp's serial FX Loop to a parallel FX Loop
✧ Stereo and Mono analog dry through (avoid latency in digital pedals)
✧ Wet | Dry utilizing a single amp
✧ And the list goes on, only limited by your imagination...
To learn more about the Red Sea visit jetpedals.com/
Chapters
0:00 Intro
2:13 What is the Red Sea
2:50 Wet Dry Wet Signal Routing
3:30 Wet Dry Signal Routing
3:56 Stereo Parallel FX Loops Signal Routing
4:17 Parallel Dual Amps Signal Routing
4:42 Analog Dry Thru Signal Routing
5:12 Serial to Parallel FX Loop Signal Routing
6:12 Why Did We Make the Red Sea
6:37 Problems the Red Sea Solves
11:09 Wet Dry Wet Playing Examples
14:43 Wet Dry Playing Examples
15:58 Stereo Parallel FX Loop Playing Examples
18:09 Parallel Dual Amps Playing Examples
21:15 Final Thoughts
25:21 Red Sea Launch Date
25:32 Black Friday Sale Details

[@stevenplacke3152]

Junior has the best names for his products... Love this concept!

[@emmettgros8535]

I'd really love to demo this to see if it is exactly the answer to my w-d-w rig! Love what is showcased here

[@noahmckenzie527]

Love it! Would love a midi version one day. I'd personally mount this under my board and then control with midi to make predetermined tweaks.

[@redsilverjack]

Midi yes also expression capable

[@pinstripe_pedals]

Congrats on an awesome product and a great tool for those playing WD and WDW setups! Thanks for the shoutout on the DISO+...always happy to support ya! DRUBEE is the bomb for TOANZ!

[@s.manuel7969]

Really cool pedal, someone else commented on being able to use an expression pedal to control the mix-that’s exactly what I was thinking too!

[@DrBadLlama]

I've only used a revelation so far, but I love it. I'm hoping for a delay from you guys. We'll see here in a little over an hour.

[@HeyWorshipLeader]

I’m really excited about this!

[@mikegates5226]

Another epic creation from Junior and the team at Jet Pedals! 🔥

[@redsilverjack]

One day need to get sponsored by jet pedals. 😂 wow just wow. One more to buy. I've got the delay revelation mk2 and delay pedal ,LOVE THEM. 🙏 now this. If you see my setups you will say that I need this jet pedal

[@The_fuzz_buzz]

This is amazing!!

[@The_fuzz_buzz]

Can’t wait! Love JET!

[@richardburkow3792]

That's awesome - I want one! Maybe two.

[@eyesintheskies]

🤔 Been looking for something like this for the studio as an alternative to the mixer

[@elinspyrd9554]

Awesome red sea 🌊 got one

[@JimmieBratcher]

Where did y'all find that guy playing in the demo? Hopefully you paid him enough to buy a new pair of shoes! Great pedal tell Zach I said hey!

Yo pensé que era un delay, algún día tendré todos sus pedales en mi pedalera

[@WorshipGuitarSkills]

Woop woop!

[@danielmorales711]

Let's gooooooo

[@Davidvs91]

Hi junior, this pedal has a great concept. I have been waiting for a pedal like this for years, however Isn’t this more like a dry blend mixer pedal? Something similar to the xotic X blender? When running a W/D/W rig you have the ability of cranking your wet effects without loosing any dry signal with the Red Sea it seams like either you loose your wet signal when you crank to the right or loose your dry signal when you crank to the left. Is their any way the Red Sea will allow you to have a very strong wet signal without loosing dry signal?

[@ADHuss1]

I don't have Stereo Amp Cab Sims. I have two Mono Amp Cab Sims (VOX Mystic Edge & Silk Drive). Now I am coming out of a Stereo Reverb into the Red Sea. How do I route my cables, so I can blend their signals and come out in stereo? Based on the routes you were showing, I came up with several different possibilities, but I am not sure what I should do.

[@dirkk_guitar]

Nice! Would be great to be able to control the mix with an exp pedal.

[@GtrMan863]

🎸👍👍

[@matterhiller]

🎉🎉🎉🎉🎉

[@erikfarquharson6119]

What Telecaster is that, if you don’t mind? :D A Fender custom shop? Sounds great!!

[@jetpedals]

It’s technically a MIM Tele that’s been completely torn down, modified, and rebuilt by a friend of mine! Plays like a dream!

[@9642SM7¹]

What is the difference between this and the Gig Rig Wetter box? Thank you foe you're time.

[@Bflatest]

So I can mono in with bass then slit that so A side has compressor and B side gas distortion then blend those two together ? I don’t need a through or 3 rd I just need to split into two loops then blend knob the two back to a mono out ?????

[@jetpedals]

Yep, that’d work just fine!

[@pvampman]

This is cool...sort of a boss LS2 but stereo version...

[@ManoloEnelsistema]

el red sea que reverb es???

[@peterprice8897]

Needs an expression pedal to blend signal as you play

[@khamhthawng7461]

Is this product already released? Where can we buy this?

[@marcdavison6937]

Each time you try to simplify this pedal, I get more confused. Likely means, I have no use for the pedal. Aside from that, the guitar playing was great and I do love your Revelation pedal. Good luck with the Red Sea. I wish you success.

[@user-xh2fv1gm8b]

Can someone explain to me (I'm very ignorant on the matter) how does the output work? How can one output, say the L one, carry a stereo signal (stereo wet h) and the R one the mono dry signal centered? I'm trying to understand than cause I'd like to send one side to my valve amp and the other one to my HX stomp but I dont know if I can send it to a mono in or not and I can't wrap my head around it.

[@grayson84111]

Probably using a TRS cable.

[@jessejohnson8210]

What are the mini switches for?

[@danielmorales711]

I want the Mr Jax and the revelation pedal

[@MattLawrence3]

Can route this w/d/w with just the UA Dream and my dry signal and my strymon trifecta for my wet signal? Again with just the one amp?

[@jetpedals]

Yep, it can since the UA is stereo.

[@MattLawrence3]

Thank you for making this bad boy! Brilliantly made and named! ❤️❤️❤️

[@MattLawrence3]

Where could I find the routing for w/d/w using just 1 amp modeler?

[@jetpedals]

@@MattLawrence3 you can see all of our options here at docs.jetpedals.com It depends if you want wet effects before or after the amp model. If before, you can use the “Dirty Wet Dry Wet” option and run the outputs of the Red Sea into the front of your modeler. If you want effects after the modeler, look at the options we show for the Iridium, ACS1, or the HX Stomp. Those will be the same for any modeler.

[@MattLawrence3]

I love giving you my money! Lol

[@me-yg6yk]

Just ordered one, 4-5 buisness days they said...

[@user-bi1qi6ef4c]

Church band saying it sounds “killer?“ What?

[@danielmorales711]

Hurrryyyy up make a preview video atleast lmao