Redcat Rampage MT 1/5 Scale Gas Monster Truck: Killer RC Super Bee Kill Switch Install

[@ramvx68]

Very cool man I love getting that big box in the mail all shiny and new !

[@calebcole2003]

Awesome video brother.. made it super easy to understand and directly to the point, I didn't think I was gonna find a video tbag did as well as you did at explaining it.. you definitely got my sub.. thanks again

[@bedanjess]

Thanks for the tutorial video of the killer switch.

[@NOLALO504]

Awesome video,i have my redcat rampage mt coming in on friday.I'm going to order my killerbee switch now,also ordered a venom 5000mah 6v hump pack.I can't wait :)

[@Truth5468]

Awesome video thank for taking the time and showing how to install the killer super bee remote kill switch. 😊

[@2005GLI]

Had a runaway once, totally sucked. Battery cover popped off remote, batteries tumbled out. It was like in slow motion too. I was like oh look at that, next thing the truck took off full throttle, hit second gear and just plowed straight and square into a concrete wall. Bent the front of the frame up a good 45 degree's, shattered everything that was plastic/factory from the midframe cross bracing forward. Spent probably close to what it cost new on replacement carbon fiber and aluminum. Straightened the frame in a large vise.

[@InTheDogHouse3DPrinting]

Changing the pull start rope is really easy to do. And with a Traxxas TX with the 2.4, and TQI, the Tx will store up to 30 models when used with the Traxxas Rx. So you won't have to go out and buy a new Tx every time you get a new rig. Just get a Traxxas Rx, and you are good to go. They are really easy to bind, and easy to set up. I'm using a Traxxas Tx on 4 different trucks, and all 4 are different models from different manufacturers. I just bought a Traxxas Rx and hooked them up.

[@pb2themax]

Also, remove the red rubber cover off of your old stop button and put it on your new stop button, to keep dirt out of there.

[@nitroneal48]

I just order the Rampage XT, can't wait for it to be delivered to me on Tuesday, my first real RC car, any pointers and anything I need to know, I am noob getting into the hobby,.

[@slgordon1]

thank you for posting this video

[@ripriotrc4561]

Great video

[@ug1166]

Excellent video Thanks

[@ascombate5803]

hello, recently I have installed a kill super bee, but I see that the led light is in an orange tone similar to red instead of being in blue ... they took models with other colors or perhaps I have something wrong connected. Greetings and I hope you can help me.

[@giannarego6780]

nice video body been checking on your channel so far I like them all

[@starguard4122]

I don't know why they simply wont send these vehicles with pre-installed kill switches right from the factory.

[@RCAddictMakuloco]

+Starguard ! Agreed.

[@MaxMad48]

Hey have you heard how it works with the stock rampage mt reciever and transmitter with this kill switch? Thanks for the video..

[@xXTECHxKNIGHTXx]

Thanks man this helped a lot! :D

[@theirishaxe9405]

I notice all those new cables are directly touching the head of the motor have you had any heat problems with them? thanks

[@RCAddictMakuloco]

No problems

[@rccustom6726]

Great learning video, Thanks

[@Bathurst_1000]

hello @ 7.40 how do you get the RED wire on to the plug at the back of the COIL , without taking it off the motor thank you for your help

[@craig8159]

Just wondering something. Saw how the wires came close tom the cylinder head. Are the wires heat proof? Or should say the coverings of the wires.

[@brianhunter2152]

What is the voltage on your remote?

[@pb2themax]

Good video. Thanks for posting it. I like to put a zip tie around the cable and the bottom standoff of the ignition coil, to make sure the cable doesn't get near the spinning flywheel. As shown here. www.killerrc.com/forum/viewtopic.php?f=25&t=586

[@jahbiggs9244]

Just getting into the 1/5 scale so I'm starting out with the xt rampage will I have a similar set up installing the super bee

[@TheWraithProject]

So can you use the bind/ch3 after you bind the reciver/trans of it's a 3 ch receiver?

[@owenrathbun4809]

How do you keep it so clean

[@wdavie27]

Dose this have lost signal cut out function buddy

[@quekgary]

Was the switch waterproof as well as the buzzle?? Ganna get 2 set for my Baja's...

[@RCAddictMakuloco]

quekgary No I don't think so but I am not worried about it.

[@quekgary]

Thanks for the reply...I've done 2 set of kill switch for both my Baja's.. Thanks bro....Cheers!

[@naignik]

How about the contrller do i have to buy the same like yours?

[@MrJcosenza79]

where does the battery connect in the reciever?

[@audiojunkie8085]

nice video... I'm also putting in a killer rc super bee kill switch I already have a traxxas summit can I just buy another tqi receiver

[@RCAddictMakuloco]

That's exactly what I am doing with mine and it works perfect back and forth between models.

[@1972bmac]

Cant you just take off the the top shroud, just one screw, you can get to the switch with out removing all the covers

[@Collin-gd2mf]

How did you get it working on your traxxas receiver

[@RCAddictMakuloco]

I used the transmitter and receiver from traxxas.

[@audiojunkie8085]

How much channels is the stock traxxas summit 4 or 5

[@RCAddictMakuloco]

+audiojunkie 808 transmitter is 4ch the receiver is 5 channel

[@soyunazteca]

thanks brother good

[@haydaraddam4504]

Arnoob I love Vdioat Malatek

[@marclupian7544]

I am looking for a rc car large scale

[@soyunazteca]

thanks

[@Rjjs31]

redcat says all their vehicles come with a failsafe from the factory.

[@diytypeofguy6502]

RC Action failsafe only applies the brakes not kill the engine

[@CarminesRCTipsandTricks]

...... as he clearly stated at the beginning of the Video.

[@tomrc4328]

They do, but it requires power to be present and the throttle servo to be functioning. If you lost power, failsafe does nothing. If the servo failed, your engine keeps on going the same rpm. Kill switch allow the engine to be shut off no matter what happens.

[@tamastenhaaff2291]

a little plastick 1/10 cant do much. please take that back my rustler almost broke my leg during a speedrun

[@RCAddictMakuloco]

Tamas Murper Yeah but those darn rustlers fly anything at that crazy speed will hurt.

[@tamastenhaaff2291]

true

[@soyunazteca]

thanks brother good

[@soyunazteca]

thanks

[@soyunazteca]

thanks brother good

[@soyunazteca]

thanks