REDCAT RAMPAGE MT V3 1/5 UNBOXING, BREAK IN AND FIRST RUN!

[@MetzRc84]

When you buy the adapters for the 24mm. It will hold the pins in for you

[@GussCustomCreations]

Yeah for the hex pins that should work. Still going to need to figure out something for the CV pin. So far so good but I know they are going to come out eventually

[@MetzRc84]

@@GussCustomCreations ohhhhh the cv pins! I used electrical tape lol

[@GoldxBacon]

@@GussCustomCreations have you ever seen or found a 1/5 scale body of the general Lee

[@GussCustomCreations]

@@GoldxBacon yeah I have but they are custom fiber glass and expensive.

[@cyclonerc1625]

Congrats on your new Rampage Gus 💯🔥👍✌

[@GussCustomCreations]

Thanks man 👍

[@SteelCityRC]

Sweet truck brother! Much fun in the snow banks. Maaan get yourself a remote killswitch and a good waterproof throttle servo. All will be good. Hope to see more of this truck.

[@GussCustomCreations]

I have changed the servo since then. Pipe, clutch spring, kill switch and a few other things. It's a blast for sure. Thanks man 👍

[@GussCustomCreations]

kzbin.info/www/bejne/jZ_agohqp5eciqs

[@SteelCityRC]

@@GussCustomCreations I see now. Sorry I was late to the party! 😃

[@GussCustomCreations]

@@SteelCityRC no worries. I have watched all your rampage videos. Part of the reason I got one. Good stuff man 👍

[@Aladinscave]

I have two of these trucks they are great had them for 6 years and have broken very few parts considering what they go threw, just a tip the plastic cover for the gears on the side needs to be sealed if there is any tiny gaps the stones get in and then goes between the gears stick a good exhaust on it it will make a big difference enjoy 🏁

[@GussCustomCreations]

Thanks. I have a pipe and a clutch and a few other things on it now and it's been great 👍

[@MD-NWWI]

Holy SH!T All kinds of new toys LOL. Looks awesome!!

[@GussCustomCreations]

I told you come on down and I'll let you drive them lol

[@MD-NWWI]

@@GussCustomCreations will do pretty soon again. Would be fun in the gravel pits out in Perkinstown!!!

[@nitroneal48]

Make sure you loctite the grub screws on your drive lines

[@GussCustomCreations]

I made collars for the drivelines so the pins can't come out. I have a video on how to make them.

[@jbproofbeaman76]

Congrats on the MT I have had mine since 2009 it's a V1

[@GussCustomCreations]

Thanks man, I really like it! 👍💯

[@joelkoivunen6482]

My new rampage come to this week usa to finland! Thanks this break in video! 👍

[@GussCustomCreations]

You're welcome, thanks for watching 👍👊💯

[@davidstokes887]

Gus were you you order your tune pipe from I'd like to order one for my Rampage

[@GussCustomCreations]

Ddm racing has the pipe. They have a chrome version as well

[@fbiagent3399]

Damn I really want 1 now.. I tried nitro but it was A pain in the ass to get it working... But gas Is super simple and always runs good from the start...

[@GussCustomCreations]

Yeah gas is a lot easier. Don't have to tune as much and pretty easy to start.

[@ThompsonRc]

Awesome new truck and run

[@GussCustomCreations]

Thanks man 👍

[@Rylan_Pond]

Where did you get the truck?

[@GussCustomCreations]

Bought it from horizon hobby.

[@Rylan_Pond]

Thanks but how much was it

[@GussCustomCreations]

@@Rylan_Pond $899

[@Rylan_Pond]

@@GussCustomCreations oh that’s expensive thanks for answering

[@rcguygarage]

METZ must be losing his MIND watching you ripping this BEAUT

[@GussCustomCreations]

Right, it's a beast! 👍💯

[@carstoniu]

so was it worth 600$? i think this is the cheapest way to get into gas rcs.. that is if the truck is any good?

[@GussCustomCreations]

This is the 900 one but yes it was worth it. It's not perfect but worth the money

[@carstoniu]

@@GussCustomCreations yeah my bad i noticed that after my post.. i have nitro and electric rc's but never had gas.. amazon has the cheaper one for a good price right now so i went for it. hearing you like it helped.. i didnt want something that would break in 5 min. thanks what on your broke first?

[@GussCustomCreations]

@@carstoniu I haven't really broken anything. Some screws came loose but that's it

[@kcordiustechnology]

@steel city rc, I just pickup one, my friend rc dealer told me to use 50/1 but the manual says use 20/1 breakins and 25/1 normal operation any suggestion much appreciated

[@GussCustomCreations]

I personally never run leaner than 32:1. Not a huge difference in performance and the engine is going to last longer.

[@E_the_trucker]

Is it necessary to put a lock tight?

[@GussCustomCreations]

Some of the parts do need to be loctited or they will come loose. You don't have to do it right away but you may cut your run short when something comes loose.

[@gucciskunkit]

monster truck! oh yea

[@GussCustomCreations]

Oh yeah 👍 Thanks 👍👍

[@MikeS-cv8xs]

It's awesome 👍

[@GussCustomCreations]

It's pretty awesome for sure

[@NmMotorsportz]

sounds bad ether adjust fuel tuning or like mine the ring was installed wroung got it 2 weeks ago and the ring got cliped by the transfer port because teh ring was stuck on the pin

[@GussCustomCreations]

I had it running way rich yet because it was still not broken in yet. Should run it rich at least a few tanks unless you want to cause engine damage.

[@NmMotorsportz]

@@GussCustomCreations i just make it run right and little more oil 25 to 1 and just do stabs of power no long term ripping and my 2 speed trans should be here soon

[@ShadowOppsRC]

Heard good things about these. Maybe I will eventually get one.

[@GussCustomCreations]

So far it has been good. A lot of fun for sure!

[@ShadowOppsRC]

@@GussCustomCreations I have had decent luck with 1/10 and 1/8th scale redcats.

[@kgm5512]

Awesome 🔥😜🤙🤜🤛🔥🔥🔥

[@GussCustomCreations]

Yeah it's pretty legit, 👍💯

[@rcandrew8780]

Looks good!!!!! Now I want one....lol

[@GussCustomCreations]

Do it! It's a blast 👍💯

[@KalsRcAdventures]

Nice 💪

[@GussCustomCreations]

Thanks man 👍

[@cyclonerc1625]

First 👍🤪

[@GussCustomCreations]

Indeed👍💯

[@RIBBY_BOY]

Things are garbage I owned 3 of em constantly break down

[@GussCustomCreations]

I haven't had any issues really. I did a few things to it and it has been great. Have ran 2 gallons through it now and it's been good.

[@RIBBY_BOY]

@@GussCustomCreations what went wrong with mine was the drive shaft they break like mad look into the dark soul real thick ones you should of seen my collection bro ten years ago I had all these trucks I had two pro models and one regular I had 3 hpi Baja 5bs and 3 nitros cars it was nuts and the rampage always broke so so much have you tried hpi Baja never once did it break their good cars or check out primal rc raminator absolutely insane

[@GussCustomCreations]

@@RIBBY_BOY Yeah I have Baja and a Losi dbxl 2.0 also.

[@RIBBY_BOY]

@@GussCustomCreations sick man I really would love to get back into i built a 4 thousand dollar Baja thsts with no engine I was gonna put the O'Neil brother twin in it someone broke in and stole it I slowly lost interest in it all after that and sold it all I even had a Trevor Simpson in one Baja I wish I had of made a youtube channel

[@GussCustomCreations]

@@RIBBY_BOY sweet man. I had some Baja about 12 years ago and then got out of them for a while. Just got back into them again like 2 years ago.

[@miltongilbert4535]

🌺 𝐩𝓻Ỗ𝓂Ø𝓈Ｍ

[@GussCustomCreations]

👍🤜🤛💯

[@chefbeardsly]

1th

[@GussCustomCreations]

So when you getting one?

[@chefbeardsly]

When I have money lol

[@nitroneal48]

Make sure you loctite the grub screws on your drive lines

[@GussCustomCreations]

I made collars for the drivelines so the pins can't come out. I have a video on how to make them.