Kubota RTV900 Head Gasket Issues!!!

Farmer Brown brought this Kubota RTV900 over for a bit of love... turns out it needed a bit more than he originally thought but we get her all tuned up! hope ya's enjoy the video and we also have the website up and running for our stickers and soon some other merch too! I'll attach a link to the website and feel free to check it out! cheers 🍻 www.rednecks-dirtyhands.com/

[@tedneitzel]

Hmmmm! Your right on the gamble fir sure. I'm sure it will be good for awhile but not sure about long term. Glad I didn't see any Bud Light lol! Another good one Pete! Glad it was you and not me on this one!!

[@stevenzimmerman4901]

Any content by you is great content! Keep on keeping on, Pete!

[@rednecksdirtyhands]

haha thank you! cheers 🍻

[@levergun]

VERY interesting Pete. I really enjoyed seeing the Kubota repair.

[@rednecksdirtyhands]

thank you! 🍻

[@jeremyjmailloux]

"Dirty little bug you!" 😂

[@joesainato8051]

Love it that thing’s running on par

[@paulbrown3180]

Just another informative video from you , that head will be just fine , I used to resurface heads when General Motors Truck Centre had a machine , then one day a guy from the 6.5 assembly plant from Ohio saw me doing that and said I could not do that because it would alter the compression - pulleez gimme another line , , so I started putting a thin film of Teflon Pipe Sealant on the known weak areas and put-em back together , never had a problem . Duramax engines where a piece of cake , just picked the thickess gasket of the three . Missed seeing your road test partner . she's a nice one for sure !!

[@rednecksdirtyhands]

thank you! cheers 🍻

[@dougkeathley9666]

Great video. Stickers ordered...Cheers!!!

[@johnjackson8561]

Love the expanded content Pete, nice one 🍻👍😎

[@rednecksdirtyhands]

thank you! 🍻

[@BCJ371]

Great video! Love the repair videos

[@rednecksdirtyhands]

thanks! 🍻

[@donnydenfeld2394]

Cheers 🍻 🥂 🍻 Pete. Great video 📹 once again 👏

[@rednecksdirtyhands]

thank you! 🍻

[@grousehunter67]

Haha hope your filming the sawmill install great video Pete ! stickers look great

[@rednecksdirtyhands]

haha she'd be one long video!! took like a week to put together lmao 🤣 worse than puttin a BBQ from home depot, a bookshelf from ikea and a gazebo from crappy tire together all at once!! one heck of a s#!t show!! but we got it!! 🤣🍻

[@tjlqk3]

Those little 902s go forever if taken care of. My grasshopper has over 4500 hours of very very few issues

[@rednecksdirtyhands]

they are great little motors for sure! 🍻

[@bartdaw6681]

Interesting video. I was curious about those engines, I have a BX with one.

[@troymodin1682]

Great episode Pete. Keep up the great content, RNDH 4 life.👍👍👍

[@rednecksdirtyhands]

haha thank you! I really appreciate it brother! 🍻

[@deanwahlstrom1993]

Hey from Minnesota Pete how is a good time watching a good laugh? Good fun keep up the great work bud

[@rednecksdirtyhands]

thank you! cheers Minnesota 🍻

[@RayFMak]

Nice one Pete… Cheers 🍻

[@rednecksdirtyhands]

thanks! cheers🍻

[@BROTUNED]

A little never sneeze would have prevented that! Should have been a factory design or even a bit smaller shoulder bolt with an o ring seal to seal her up. Shitty the cover broke I feel your pain Pete!

[@RayFMak]

Just placed an order for some stickers, definitely need a hat and a t-shirt ✌🏻

[@rednecksdirtyhands]

that's awesome! thank you! 🍻

[@jeffnicks2128]

Nice job! Interested in seeing the saw mill when it’s done

[@rednecksdirtyhands]

haha yeah we might have to "post" a video of it in action! 🤣🍻

[@slickmuck4312]

@@rednecksdirtyhands absolutely wanna see it in action

[@mikeeaton251]

Awesome video Pete 😀🍺

[@rednecksdirtyhands]

thank you! 🍻

[@franko7444]

Nice one on saving the money on the head. The stealer ship would have charged thousands!

[@coreyisaacs698]

Nice One!!!

[@scottmcnabb9122]

Yeah Pete I may get one of those sticker she dangles for my Polaris I know now much you love Polaris Ha Ha !!! Just kidding around with you . Great job fixing the kubota by the way .

[@rednecksdirtyhands]

haha I'd be proud to see it on your polaris! cheers 🍻 and thank you!

[@tomchalette1509]

Also on the Kubota it was arching spark right near the fuel leak.

[@Copesthetic-Aesthetic]

Feller on here put a Kubota diesel in Saturn, and was getting over 60 mpg

[@billdwyer7897]

Hope You are not near the wildfires, We are getting the smoke all the way down here in Southwestern Connecticut, hangs in the air today like a fog ,

[@rednecksdirtyhands]

yeah no fires near us but the smoke is all around! crazy

[@ericking9767]

GET THIS MAN TO 20K SUBS...LET'S GO!!!

[@rednecksdirtyhands]

love the support brother! 🍻

[@ericking9767]

Great content

[@rednecksdirtyhands]

thank you! 🍻

[@mattsimms4325]

Great video

[@rednecksdirtyhands]

thank you! 🍻

[@Georgebd2]

That bad boy needs a turbo installed

[@richhowes-xr5ix]

Another great video Pete,keep them coming! I couldn’t find your merchandise website?

[@markv151]

I think you might mean Pete not Mike ;-)

[@richhowes-xr5ix]

@@markv151 my apologies I was drinking a Mikes Hard Lemonade while writing my comment. Me thinks my drink interpolated with my comment!

[@markv151]

@@richhowes-xr5ix All good brother..cheers !

[@fitch8363]

I have a 2004 with a serial number in the mid 20,000 range that has is closing in on 3,200 hours. One clue to its age is the front drive shaft. Is it one piece or does it have a universal in the middle of it. Mine had the universal. It failed and I learned Kubota had a kit to modify the drive to a one piece front drive shaft. I installed that and have had no problems with the drive shaft since.

[@mcjok88]

👍

[@johnlaluzerne1625]

Link for the website? Possibly one too many cold snacks but I couldn't find it 😅

[@benschlack5814]

Just smoked a fatty and now some RNDH..... Nice one 👍

[@rednecksdirtyhands]

haha good times "Rollin" through the videos!! 🤪🤣🍻

[@CPAULKLEIN]

Maybe i missed it but was that cooling fan running?

[@waffalobill]

Need shipping to the US

[@Mid-michigan5]

? What is the torq on the head bolts

[@Georgebd2]

I can't believe those bolts broke without any weasel piss

[@jrac863]

Did you put a new oring on the head allignment pin before you set the head in place?

[@rednecksdirtyhands]

yeah the new head gasket already had the o-ring built into it 🍻

[@chadpeterson-rf8yd]

I really like how my mini ho moves also😅

[@rednecksdirtyhands]

🤣🍻

[@orionwarren4244]

No machine shops close by to get that head milled, Pete?

[@rednecksdirtyhands]

none real close to me..but I've actually ordered a new head and valves for it just in case lol 🤣🍻 it really only takes about an hour or so to swap the head on it so I figured just throw a gasket in it for now and see what happens and if there's an issue I'll put the new head on it when it shows up 🍻

[@larryw5429]

I would of liked to of seen the radiator get washed out.. Most of the time these things get warped heads and blown gasket its because the radiator got clogged up with mud and weed seeds ect and it runs hot and you get suprise suprise!

[@rednecksdirtyhands]

yeah you're not wrong there! good tip and I will make sure the rad is free and clear 🍻

[@markjordan9357]

Watching ya from new york...through a thick haze of your Canadian smoke....aaaarrrgggghh.....🤕when you ol boys put the fire out....???....eh?... I know it's not your fault......but how much woods you got left??

[@homergarcia376]

What did you torque the head bolts too?

[@rednecksdirtyhands]

I honestly can't remember lol 🤔

[@desertmandan123]

Radiators are always a fault on these 3 cyl Kubota lumps....

[@rednecksdirtyhands]

yeah gotta make sure ya wash them out all the time too...the fins get all plugged up with dirt and they over heat easier...🍻

[@Tacoma1989]

Do you have to put a tdc? When adjusting valves

[@rednecksdirtyhands]

you don't necessarily have to...I just make sure the valves are closed and nowhere near the point of being pushed open...always worked for me. then set them and roll it over and re check just to make sure..did it like that on this kubota and she runs Tickidy Boo! 🤣🍻

[@Tacoma1989]

😂thanks

[@damonmcnab5588]

Does beer come with an order lol

[@rednecksdirtyhands]

lmao 🤣 oh belive me....I thought about it!! 🍻

[@mazdarx7887]

Most of the problems with those diesel atv's is people drive them like they are gas motors. If you can't drive em like an old feller, buy a gas rig. Can easily get 4 to 5 thousand hours on those motors with regular maintance. Looks like that motor was either a bad motor form the start or driven like it was stolen.

[@prevost8686]

Most get run hot because the owner lets the radiator fins clog up with dust,mud, weeds.

[@barktwicemofo]

like a lot of vids, fun 2 watch ..., but some of us are looking 4 answers, so instead of uh.. well ..i don't know , CALL THE DEALER!!!, ( no, not ur drug dealer bubba ) slowly and carefully give him the serial / product/ group / i.d./ phone, hell bubba give him ur s.s. number, he'll tell u what year it is !! wow !!! wtf!!