IMPROVEMENTS & MORE GEYSERS - ONI - Spaced Out: Ep. #13 (Oxygen Not Included)

[@LLNTMY]

I absolutely love watching the dupes just digging and building while being “idle” technically.

[@Nathans-Sandbox]

It's relaxing;)

[@seanhunter111]

One thing I do to stop my dupes getting trapped when I'm digging out large areas is make the ladder construction one higher priority than the digging. Then the normally won't get stuck. Aah you said it in the video later.

[@Nathans-Sandbox]

👍😉

[@friendlyfbi_guy3163]

Started a new world a few days ago and I forgot how important resource management was in this game! Your vids have helped so much. Like the way you pumped gasses you wanted vs didn't is exactly what I needed for my carbon pit filters. Trying to pump out O2 and leave in carbon for the algae plants

[@trenthexum4735]

Yay! Even the weekends can't stop you!

[@Nathans-Sandbox]

😉

[@guty_18]

When dupes work with light they get a “Lit workspace” buff and every task they do is a 15% faster.

[@Nathans-Sandbox]

👍

[@azerukaze]

Regarding the trapped dupes, what I usually do when digging is to queue only 2 rows above the ladders instead of all 4 rows. Only dig the rest once the ladders are finished. Hope that helps! As always keep up the great work!

[@Nathans-Sandbox]

Good tip!

[@nico-ob6wj]

This crust is so cold. I was pumping my carbon dioxyde thinking it was going in space but it made a big pool of liquid CO2 just waiting a dupe opening the door to fall in my base

[@Nathans-Sandbox]

😂

[@jja3347]

yay you used my lighting up tip! thank you, you made my day!:)

[@Nathans-Sandbox]

👍

[@creeperthekingcreeper8234]

Hurray! I'm finally caught up. Can't wait for the next episode.

[@Nathans-Sandbox]

😉

[@ryanhaydon9187]

After watching this I would not vacuum out the geyser room. I would just wait for it to fill with water and concentrate my resources elsewhere till I could close it off. Great video. Great pace in game and of making vids

[@Nathans-Sandbox]

Yeah, that would have been the more elegant solution.

[@jemsterr]

The temp shift plates are always made at the temperature of the material you use. So cooler materials will make cooler temp shift plates. If the material is very hot, it will be a maximum of 45 degrees, though. This is why yours were so hot - you used a hot material to make them.

[@Nathans-Sandbox]

Yes, it's always 45 degrees no matter how hot it was.

[@jemsterr]

@@Nathans-Sandbox Unless the material is cooler than 45.

[@richardcagle5475]

@@jemsterr confirmed. made mine out of 25c mats, had 25c plates

[@joaocasado7194]

Loving those daily uploads

[@Nathans-Sandbox]

👍

[@princesssookeh]

Even if this was the jankiest ONI series ever created; I'd still love it for the sheer amount of dramatic gasps.😂

[@Nathans-Sandbox]

😂👍

[@thanasispanagiotopoulos220]

Hi Nathan, congrats on the series! Regarding your thoughts for the cool salt slush geyser on 14:40 of the video, actually you don't really need to make the room lower, as the salty water does not emit any gases. In case the liquid drops below the top level, it will remain a vacuum.

[@richardcagle5475]

lol damn glad i held off collecting those useless gasses :) i'm so much further along at less cycles because i just wait for you to "fix" stuff later and dont spend 3 cycles building gas lines an such. really appreciating all your hard work here for sure. thanks edit: dammit... hydrogen. off to collect some of that "useless" gas lol

[@cihloun]

I have a theory about your duplicants making themself stuck in the worst places. They need higher wages.

[@Nathans-Sandbox]

😂

[@flintube2622]

Loving the ONI!

[@Nathans-Sandbox]

👍

[@rabbitholeryn]

Loving this series! Daily dose of serotonin 😂

[@Nathans-Sandbox]

👍😉

[@chuckemtrad8541]

Btw. Negative traits on Dupes give bonus points for their stats. The worse the trait, the more points it gives. The more negative traits, the more it gives. You will never get a +15 Dupe unless they have multiple negative traits. You just have to find something you can live with, like Mouth breather (+5), Bottomless Stomach (+4), or Plant Murderer (+2). Edit: For your Dupe that you denied, if he's a dedicated cook, who cares if he takes a hit to farming and building. There's plenty of other secondary tasks he can do. However, the Flatulent trait is a no go for me because I don't want him spreading natural gas everywhere.

[@Nathans-Sandbox]

I figuree the negative traits have an impact on the numbers. Flactulent dupes are really nasty indeed;)

[@kinagrill]

Natural gas can be useful tho, and it's free! just allow it to funnel up, have a pump up there that will store the gas, then use it for power rather than coal or some such.

[@Helicard]

I poop the fastest with the lights out, staring at a mirror and repeating Bloody Mary over and over until I am done.

[@Nathans-Sandbox]

lol

[@Tom-tv3zh]

Nathan you should add lights to thier bed rooms so they can sleep faster

[@jemsterr]

;)

[@Nathans-Sandbox]

😂

[@andyli929]

Just started a new colony to play with you at the same time! (and realising how messy my base is compared to how you manage your dupes and contraption placements)

[@Nathans-Sandbox]

Good luck with your colony!;)

[@haibach7054]

Thanks for the video. Love it.

[@Nathans-Sandbox]

👍

[@treneeaewnaur8558]

thank you

[@Nathans-Sandbox]

:)

[@Pallienl]

I dont understand the polluted water in the geyser, won't the geyser be submerged and be blocked from erupting?

[@Nathans-Sandbox]

Only if there is a certain amount already in the tile. We'll have to find out when it stops errupting.

[@jemsterr]

Geysers and volcanoes have a maximum pressure, which is measured on the tile second from the left and one up. (squished ones like the salt slush geyser also check the 4 tiles around that and only one needs to be below max to erupt - nice exploit to make it keep pumping if you can trap a gas below pressure in one of those tiles without breaking the walls) If the pressure is above that (doesn't matter if it's a gas or a liquid) it won't erupt, but if it's below, it will.

[@jemsterr]

Generally, that max pressure is 5kg for gas/steam vents (50 for CO2 geyser/leaky oil fissure), 150 for volcanoes and 500 for water geysers/vents. If you look at the geyser page on the wiki, you can see the Pmax for each geyser/vent/volcano.

[@wesb5899]

here's a like and comment for the algorithm buddy.

[@Nathans-Sandbox]

🥰

[@arnarerlingsson6440]

see you in the next one.

[@Nathans-Sandbox]

😉

[@vascocarpentero4359]

Where are your containers for storing? :)

[@larrylindgren9484]

Lighting brooming didn't work before. Not sure if they changed it in the DLC.

[@Nathans-Sandbox]

Ok I figured for some things it will probably not work.

[@mathieugariepy2948]

Great video!

[@Nathans-Sandbox]

Glad you enjoyed it

[@MrOsis]

Have you checked automation cable for newest pump? I think you missed it

[@Nathans-Sandbox]

It is there, might have cut that out.

[@MrOsis]

@@Nathans-Sandbox ok, apparently I missed that 👍

[@TheElderRobertArnonym]

do you ignore the food poisoning of the polluted water you put in there?

[@Nathans-Sandbox]

Yes, it will be eliminated over time with the new output of the geyser.

[@mrnoide8027]

Hello Nathan! In my current save of oxygen not included, I'm having a problem. It looks like one, and only one of my dupes is not eating even thought that I have tons of food in the fridge. Do you know how to solve this?

[@Nathans-Sandbox]

Maybe in the Consumables you have disabled that food for that specific dupe?

[@mrnoide8027]

@@Nathans-SandboxUnfortunately that’s not the case… That dupe can eat everything. That started when I disabled meat for everyone however i still got plenty of muckroot, and that dupe can eat it. Well, I guess it’s just a glitch, I’m going to make a new save…

[@TheMule71]

@@mrnoide8027 You may want to check the dup's navigation, maybe food isn't reachable.

[@mrnoide8027]

@@TheMule71 there are 40 kilocalories on the fridge, and the fridge is reachable

[@AyooTube]

Wait... Maybe im missing an important point here, but... Why making vacuum or 100% filling with liquid a "pwater geyser room", if, unless you instantly drain the pwater when it appears or never drain it if the room its completely full, its gonna offgas and sooner or later fill at least the upper part of the "room" with gas anyway? I mean, I get that you wanna do it to optimize space to the extreme in literally all gases and all other liquids... But why in a liquid that "creates" gas? You re just avoiding gas while the "room" is 100% full (or empty) of pwater, but as soon as one simple tile is free of pwater (which will happen a few minutes after you first start pumping it), or as soon as the first drop appears if it was empty, all efforts will be wasted...

[@TopaT0pa]

algo bump

[@Nathans-Sandbox]

👍

[@larrylindgren9484]

The second the geyser goes off it will off gas. Not sure how you're going to stop it. It doesn't matter really. The air will rise to the top. It will be compressed into the upper corners.

[@Nathans-Sandbox]

That's why I filled it with PW. The sensor is gonna make sure to only pump so that there is still some PW left in the upper tiles.

[@TheMule71]

@@Nathans-Sandbox Lowering the ceiling was a good idea. You can make extra room below the geyser but not above. When the 2nd layer reaches 500g, the geyser goes overpressure. The third layer never gets filled anyway (not by the geyser at least).

[@udinroslee8598]

😀

[@Nathans-Sandbox]

👍

[@philbo_bagginz]

[@Nathans-Sandbox]

👍

[@alicerose1019]

shoutout to using Devon's they/them pronouns

[@Nathans-Sandbox]

👍

[@auscaliber1]

so does he stop doing that weird inhale scream thing every time something goes good or bad? i really like this but man i find that so annoying

[@Nathans-Sandbox]

He doesn't.