Refill Samsung ML 1910 1915 2525 2580 SCX4600 4623F SF650 1052L toner cartridge

Remanufacturing Samsung toner cartridge MLT-D105, 1052L, for use in ML 1910, ML 1915, ML 2525W, ML 2580N, SCX 4600, SCX 4623F, SF 650, SF 650P and others.
Standard cartridge (MLT-D105S) is rated for 1500 pages.
High yield cartridge (MLT-D105L) is rated for 2500 pages.
OEM chips are regional, so be sure to get the proper chip for your country.
A 1000 page starter cartridge is shipped with new machines.
Required Tools and Supplies
- Screwdriver
- Needle nose pliers
- Blade or Knife
- Toner for use in Samsung ML-1910
- Chip (make sure you have the correct region chip)
- Drum (optional)
- Isopropyl alcohol
Repetitive defect:
Drum: 75,6 mm
Supply roller: 49,0 mm
Transfer roller: 47,0 mm
Charge roller: 37,5 mm
Developer roller: 35,0 mm
Upper fuser roller: 77,5 mm
Lower fuser roller: 75,4 mm
Printing a Test Page:
1. With the printer in "READY" state, press and hold "Cancel" button for about 2 seconds until the status LED blinks slowly.
2. Release the button.
Printing a Configuration Page:
1. With the printer in "READY" state, press and hold "Cancel" button for about 5 seconds until the status LED blinks fast.
2. Release the button.
Printing a Cleaning Page:
1. With the printer in "READY" state, press and hold "Cancel" button for about eight seconds until the status LED blinks fast.
2. Release the button.
Printing a Supplies Status Page:
1. With the printer in "READY" state, press and hold the "Cancel" button for about ten seconds until the status LED blinks fast.
2. Release the button.
--------------------------------------------
For any question or suggestion leave a comment
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)
www.linkaccesso...
email: [e-mail]
other links:
www.emmegiricam...
www.samsung.com...
-------------------------------------------------------------------------

[@Arikalkos]

Thank you, greetings from México :)

[@prayerpostman]

a big thx from india

[@imanaliman3762]

What if Every refill cartridge, must change the chip ? #thanks from indonesia

[@viandant5]

Yes the chip must be changed

[@MegaSanjay07]

my printer rubber coating on foam roller distorted can this toner be able to work without it

[@viandant5]

which foam roller?

[@MegaSanjay07]

@@viandant5 Spong roller the thinnest .....aslo called supply roller.

[@viandant5]

That roller bring the toner near the developer roller. The cartridge could work for some time

[@premprakashreswal943]

Samsung printer showing red light blinking. And show prepare new tonner. Why I have already refill it. Recently . Help I am using M2876 nd printer, mlt116L toner

[@viandant5]

you have to change the chip

[@obiwan922]

@@viandant5 where would i get chip? any link please

[@viandant5]

@@obiwan922 I have no links but you can find it searching with Google Bing or something similar

[@scotts9300]

Why does the chip need to be replaced?

[@viandant5]

Because if you don't replace it, the printer will stop to work

[@macrey773]

what happens if i didn't replace the chip? will it still work?

[@viandant5]

mac rey if the chip has reach the end of its life, it will not work

[@macrey773]

+viandant5 thank you

[@alufeyomsiska9793]

hello sir help me, my printer has a problem of paper jam. please help

[@viandant5]

Try to clean the paper roller with water or alcohol. Samsung has the paper roller near the paper cassette

[@prayerpostman]

a big thx from india