CYLINDER HEAD REBUILD VTEC D16Y8 | CIVIC EG

[@DimZin]

This guys really did a great job with the head. It looked brand new, a port,polish job would make it nicer.

[@YungEagle3k]

Polish something carbon will eventually stick to. Yep sure

[@DimZin]

@@YungEagle3k racecar

[@joey9511]

@@YungEagle3k a good polish will keep the carbon off longer

[@spoolinekrhdhulk-urban-c-w5709]

Changed the dates a stole too

[@blindspoke]

Rob you are awesome, it’s nice to see you are back again keep going I would like to see that D16z6 running again take care

[@RefineMovement]

That’s real nice, thank you! Yeah, That D16z6 has been in the back of my mind for a while now. I really would like to get it built up and running great

[@richtmyre4647]

I'm glad to see this video, just picked up a y8 head from the junk yard this morning and plan to have all this done

[@Nathan-gj8ch]

The thermostat housing is really constrictive on the Y8 when I port the main oil feed galley at the oil pump and in the oil filter housing I also port part of the block where the water pump sets to the tube and on the other side of the head port the thermostat housing coming from the tube. Just a few mm of opening these holes up changes the flow rate dramatically.

[@Hermiwalle]

it's the small things that count

[@e.r.videography6209]

Wow! You said Thank you a lot of times. You are a truly grateful guy. Good job on the rebuild.

[@corybennett817]

HOLE. LEE. FUDGE. GEL. US. AS. FUDGE. Damn that was awesome to watch. Thank you to the shop for letting you film that.

[@upfactoryracing4148]

Hell yeah man they did a great job! Wish I had that awesome of a shop around me. You should throw on a Jasma racing cam to top it off. Great investment Rob!!!

[@GarageBuiltHondas]

Overheating is such a pain in the ass. Some it I feel likes it's almost better to leave the heater core as a secondary radiator if you do encounter overheating issues. It could potentially save a head gasket job! Nonetheless, good stuff Rob, glad to see you back out in the garage getting work done!

[@rendiix4269]

That head gasket is very thin for the head that already looks hella rectified??

[@jvh22a]

Cant wait to see it all put together!

[@bosiayaespinoza1240]

god i remember the white crx project from years back glad yall stayed loyal with hondas only reason ive stuck around haha

[@roronoa7vector]

Awesome video. Cylinder head looks mint!!!! Can't wait to see it fired up!

[@evertonmachia1808]

👏👏 d series!

[@harleyhem3381]

Clearly this guy got free head work. All the work they performed is standard work every machine shop does also happens to be the same work they perform on every cylinder head as well. But this guy was acting like they were performing magic tricks 🤣🤦

[@B.E.R.T.]

Wish they were closer to Houston. Top notch!

[@ThexGreatxLTS]

D series is a very cool budget friendly engine for track use eh, how has it held up so far? Do you feel it is fast enough as is?

[@E.Bandier]

Great man good learning for my civic projekt 🎉

[@kracksmith4ejm1]

nice is there a recommended So Cal shop that does this too?

[@Ekk24_Cali]

What valves, springs, retainers you use? And how much was the complete service you had done?

[@yangthao4612]

Wish I had such a machine shop in my area 😢

[@UncutNinjaDope]

how much and how long did all this cost

[@RYFABGarage]

i had the same question, just gonna call up Advanced Cylinder Heads

[@smallenginekid6252]

I got mine done for 200$

[@manuellopezej1]

You should definitely do a rebuild on the z6

[@TheNDex]

Clean AF! How much did the whole service cost?

[@armstrong4196]

More than the car 🚗.

[@anthonyyoung7344]

If you want that D16 to run good port and polish the head it will make a huge difference.

[@jeffreyevans6892]

Very,very, nice. What did they charge you.

[@TRDKhanbrothers]

What was the total cost of sending the head in?

[@lmc_motorsports]

About How much did the head cost you to get cleaned up and machined

[@spankthemonkey3437]

Luis Casablanca probably 500 or more

[@perkl8er849]

It’s.. it’s so beautiful.

[@SuperTheBryan]

how much does it cost bro?? and do you have to do valve adjustment after?

[@paimei6798]

Nice job 👌

[@ExtremeDailyDrivers]

Great video! I really learned a lot!

[@allensickspeedenthusiastbl4067]

Hell yea! Awesome video definitely wanna find a shop around me that can do similar work! I have a z6 I’m rebuilding and really wanting to look into getting this done! If you don’t mind sharing about how much did all this cost?

[@tommylyeah]

Engine parts cleaning pr0n. Yes, please.

[@BmwMe-uh9sy]

how much was service btw

[@jdsphynx3656]

How much did you pay for whole head job ? I have the same head and want the same service as yours.

[@cbdreamer1709]

Hell yeah bro. Going to be sweet

[@johndoe2022]

How much did it cost? thats the most important detail

[@familycarwash1165]

i litterally stop doing my job to watch this video

[@alexrenault3620]

Decent channel lad

[@Divisionsixty]

Hey, to forget to use a scotch break and clean the engine and marry this clean cylinder head to a clean engine I love your videos ^_^

[@harryazzole7814]

That's a horrible idea, as scotch brite will score the mating surfaces enough for catastrophic head gasket failure. This happened to Speed Academy's SR20 a year or two ago when they rebuilt the engine. They have a video showing their error and where/how it failed. You never scuff the mating surfaces for any reason whatsoever on any two pieces with metal to metal contact.

[@EpimethiusInPerpituity]

Did they do any before/after flow testing to show the improvements to top end that this valve job made?

[@RefineMovement]

Not on this particular head, no.

[@jaydee4200]

This video is good for beginners

[@Ao_Vlogein]

AY Bro.... Finally I've Found my Car's Issue..... it has a D16wa Engine and it starts rising up the Temperature on Highway right after 10 to 15 minutes on 3 to 4000 RPMs...

[@SpencerGodman]

Hey buddy I really need some help cause I ended up doing the same thing to my 94 coup I also have a turbo but I have everything together I have a y8 motor with a z6 intake and injectors with the factory harness and computer I do believe

[@wilbertosantos501]

Do you have dual spring balve

[@luismustelier5916]

I wanna my head to be like this one great job man.....I’m Jacksonville where this it at

[@RefineMovement]

advancedcylinderheads.com/ Advanced Cylinder Heads, Winter Park FL

[@93paxon]

Cost of all this?

[@nexrey7702]

Samuel Bishop im trying to find out too man

[@BrunoSantos-jw3er]

Did you checked the block for warping?

[@RefineMovement]

I put a straight edge on the top of the block and didn't see any obvious gaps

[@boosted_2j]

If you getting all this done why dont you go turbo build.? Or at least future proof it for such ?

[@richieb74]

Idk I can get a pretty badass 5 angle valve job on my vgs-20 it just takes longer

[@jcrisen5417]

How much did the job cost? Getting my z6 rebuild in a month.

[@RefineMovement]

advancedcylinderheads.com/ Advanced Cylinder Heads, Winter Park FL Contact them for pricing. Will always depend on what your specific head needs.

[@holybritches]

@@RefineMovement I guess that means it would normally be super expensive! I bet they gave you a break for advertising, though.

[@BmwMe-uh9sy]

@@holybritches ye it was prob close to a grand

[@joshrenteria2216]

Looks great! I’m assuming a valve adjustment will be coming after installing/running? If so please do a update with it! Great content, keep it coming.

[@RefineMovement]

Thank you! Yes, next video we install the cylinder head and the video after that we do the valve lash adjustment and fire the engine up!

[@leevongyang9458]

Z6 rebuild please!

[@Curtis1900]

I know the hot tanked it and refreshed it but is this a valve job and resurface

[@RefineMovement]

Yeah, hot tank, replaced exhaust valve guides, and 3 angle valve job

[@sanchezfamily7094]

#1 first view plus 1st comment

[@MrFamilyMoments]

How much did all that cost, or would cost?

[@boost_edjamesmathew2168]

You should have got a bowl blend and polished the combustion chambers bro otherwise that's not really going to make any dramatic difference at all as you still have the same restrictions in the stock runner's

[@BloodyWallz]

So how much Did the rebuild run you?

[@arthellstrobles1241]

That thing looks nyce!!!

[@calvink3081]

Anyone know what the tool at 14:26 is called? For smoothing out edges

[@TheDeadMan3848]

Calvin K “Deburring tool”

[@mihailpetrovici5044]

Why didn t you ported the head

[@SirCavemaninthewest]

I paid $120 to get my Saturn dohc cylinder head resurfaced. I screwed up the timing now I have to get new valve seats and new guides.

[@tawnhor]

Nice background information here

[@justaregularguy3827]

how much was this to do ?

[@smokeline8368]

What is it Color pink around valve seat Ask for knowledge Thank you.

[@Bram0vitz]

looks like marking fluid

[@jaythesizzler1691]

How much ?

[@RefineMovement]

advancedcylinderheads.com/ Advanced Cylinder Heads, Winter Park FL Contact them for any pricing.

[@isaacortizcolon5821]

How much you pay for that job?

[@RefineMovement]

advancedcylinderheads.com/ Advanced Cylinder Heads, Winter Park FL Contact them for any pricing

[@juanquepablo9004]

I wish we had this kinda shit at our shop, valve jobs are a fucking pain with our machine.

[@xavierlittle1006]

How much 2 rebuild the head

[@braydoncoate]

how much did they charge for the rebuild?

[@RefineMovement]

Contact Advanced Cylinder Heads in Winter Park FL and they can give you pricing

[@KouKouYang]

How much does this cost to do?

[@RefineMovement]

You'll want to contact your local shop to see what they charge. If you are in Central FL contact Advanced Cylinder Heads! They were great

[@gamex9288]

How much you pay for all?

[@ninjapleaze]

Change your oil more frequently bro..

[@RefineMovement]

This engine is brand new to me. Bro.

[@rodrigocazaresjr.6924]

How much did they charge you? I looks great and they have some really awesome equipment over there at advance head shop...I was a machinist and welder in the army and had the chance to work at a place called Flatland Forge in Midland TX with a lot of CNC work. (After I got out of the Army). I would LOVE to work with a shop like that or at least learn how to run it. Thanks for the video!

[@michaelgonzales23]

cylinder head code? what is you code head? its p2j vtec? or p2A non vtec?? please reply. thank u :)

[@RefineMovement]

The vtec head

[@jaimeayala6659]

How much was this job

[@themonolithian]

Should've back cut the valves while you were there. Probably get another 7 horsepower

[@kerstas10]

what? More info?

[@G58]

That’s not a micrometer. It’s a vernier calliper or gauge.

[@Trozen17]

Video should be titled. How to clean and machine a cylinder head

[@TM-fx5le]

But he rebuilt it?

[@knolez1546]

the music reminds me of Crash Bandicoot or some ish

[@septurno9722]

I’m pretty sure that’s not a micrometer...

[@Airikwong714]

You’re right, vernier calipers.

[@HC-ov2hh]

You probably need two full radiators living in hot ass Florida

[@G58]

14:25 “This honestly serves no purpose”!??? Really? De-burring is essential to avoid the risk of having fine metallic particles floating around in the engine. Did they wash the head again after all that machining? I’m guessing not. Oh dear.

[@colsonbrandt1277]

Cost for the job?

[@RefineMovement]

advancedcylinderheads.com/ Advanced Cylinder Heads, Winter Park FL Contact them for any pricing.

[@raymondaguilar9159]

That's a dial Caliper not a micrometer

[@fatboy2smoker841]

Replacing the head gasket is routine maintenance on a dseries.... I resurface 5-10 a week! B-series is significantly more reliable

[@jdmcarboy64]

I would bought a b16 for the price it costs to get a head rebuilt.

[@uninvestigated]

He's probably trying to stay in a stock class for racing

[@screwdajuice]

All of this for a D series.

[@ZT_Performance]

Take that thermostat out, or at least put a 160 in it

[@1one179]

Que mal que no mostraron el armado de válvulas y resortes 👎

[@jorgem3272]

Should have done some upgrades to to the cam and or valve train. Even a port and polish

[@RefineMovement]

Eh, my goal wasn't to add any small amount of power, just trying to get reliability out of my engine

[@jrmyadventr]

Too bad I live in Michigan

[@idkidk8278]

Lame. Would be cooler if you could see the resurfacing blade doing its job.

[@user-fw1go1qm5x]

NEWEN👍 ROTTLER👎

[@spoolinekrhdhulk-urban-c-w5709]

Thief iar I'm liight efine movements ass like a plug wire

[@SABRECRAFT]

how much did it cost to have done?